/*
* ipmi_poweroff.c
*
* MontaVista IPMI Poweroff extension to sys_reboot
*
* Author: MontaVista Software, Inc.
* Steven Dake <sdake@mvista.com>
* Corey Minyard <cminyard@mvista.com>
* source@mvista.com
*
* Copyright 2002,2004 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/proc_fs.h>
#include <linux/string.h>
#include <linux/completion.h>
#include <linux/kdev_t.h>
#include <linux/ipmi.h>
#include <linux/ipmi_smi.h>
#define PFX "IPMI poweroff: "
/* Where to we insert our poweroff function? */
extern void (*pm_power_off)(void);
/* Definitions for controlling power off (if the system supports it). It
* conveniently matches the IPMI chassis control values. */
#define IPMI_CHASSIS_POWER_DOWN 0 /* power down, the default. */
#define IPMI_CHASSIS_POWER_CYCLE 0x02 /* power cycle */
/* the IPMI data command */
static int poweroff_powercycle;
/* parameter definition to allow user to flag power cycle */
module_param(poweroff_powercycle, int, 0644);
MODULE_PARM_DESC(poweroff_powercycles, " Set to non-zero to enable power cycle instead of power down. Power cycle is contingent on hardware support, otherwise it defaults back to power down.");
/* Stuff from the get device id command. */
static unsigned int mfg_id;
static unsigned int prod_id;
static unsigned char capabilities;
static unsigned char ipmi_version;
/* We use our own messages for this operation, we don't let the system
allocate them, since we may be in a panic situation. The whole
thing is single-threaded, anyway, so multiple messages are not
required. */
static void dummy_smi_free(struct ipmi_smi_msg *msg)
{
}
static void dummy_recv_free(struct ipmi_recv_msg *msg)
{
}
static struct ipmi_smi_msg halt_smi_msg =
{
.done = dummy_smi_free
};
static struct ipmi_recv_msg halt_recv_msg =
{
.done = dummy_recv_free
};
/*
* Code to send a message and wait for the reponse.
*/
static void receive_handler(struct ipmi_recv_msg *recv_msg, void *handler_data)
{
struct completion *comp = recv_msg->user_msg_data;
if (comp)
complete(comp);
}
static struct ipmi_user_hndl ipmi_poweroff_handler =
{
.ipmi_recv_hndl = receive_handler
};
static int ipmi_request_wait_for_response(ipmi_user_t user,
struct ipmi_addr *addr,
struct kernel_ipmi_msg *send_msg)
{
int rv;
struct completion comp;
init_completion(&comp);
rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, &comp,
&halt_smi_msg, &halt_recv_msg, 0);
if (rv)
return rv;
wait_for_completion(&comp);
return halt_recv_msg.msg.data[0];
}
/* We are in run-to-completion mode, no completion is desired. */
static int ipmi_request_in_rc_mode(ipmi_user_t user,
struct ipmi_addr *addr,
struct kernel_ipmi_msg *send_msg)
{
int rv;
rv = ipmi_request_supply_msgs(user, addr, 0, send_msg, NULL,
&halt_smi_msg, &halt_recv_msg, 0);
if (rv)
return rv;
return halt_recv_msg.msg.data[0];
}
/*
* ATCA Support
*/
#define IPMI_NETFN_ATCA 0x2c
#define IPMI_ATCA_SET_POWER_CMD 0x11
#define IPMI_ATCA_GET_ADDR_INFO_CMD 0x01
#define IPMI_PICMG_ID 0
static int ipmi_atca_detect (ipmi_user_t user)
{
struct ipmi_system_interface_addr smi_addr;
struct kernel_ipmi_msg send_msg;
int rv;
unsigned char data[1];
/*
* Configure IPMI address for local access
*/
smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
smi_addr.channel = IPMI_BMC_CHANNEL;
smi_addr.lun = 0;
/*
* Use get address info to check and see if we are ATCA
*/
send_msg.netfn = IPMI_NETFN_ATCA;
send_msg.cmd = IPMI_ATCA_GET_ADDR_INFO_CMD;
data[0] = IPMI_PICMG_ID;
send_msg.data = data;
send_msg.data_len = sizeof(data);
rv = ipmi_request_wait_for_response(user,
(struct ipmi_addr *) &smi_addr,
&send_msg);
return !rv;
}
static void ipmi_poweroff_atca (ipmi_user_t user)
{
struct ipmi_system_interface_addr smi_addr;
struct kernel_ipmi_msg send_msg;
int rv;
unsigned char data[4];
/*
* Configure IPMI address for local access
*/
smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
smi_addr.channel = IPMI_BMC_CHANNEL;
smi_addr.lun = 0;
printk(KERN_INFO PFX "Powering down via ATCA power command\n");
/*
* Power down
*/
send_msg.netfn = IPMI_NETFN_ATCA;
send_msg.cmd = IPMI_ATCA_SET_POWER_CMD;
data[0] = IPMI_PICMG_ID;
data[1] = 0; /* FRU id */
data[2] = 0; /* Power Level */
data[3] = 0; /* Don't change saved presets */
send_msg.data = data;
send_msg.data_len = sizeof (data);
rv = ipmi_request_in_rc_mode(user,
(struct ipmi_addr *) &smi_addr,
&send_msg);
if (rv) {
printk(KERN_ERR PFX "Unable to send ATCA powerdown message,"
" IPMI error 0x%x\n", rv);
goto out;
}
out:
return;
}
/*
* CPI1 Support
*/
#define IPMI_NETFN_OEM_1 0xf8
#define OEM_GRP_CMD_SET_RESET_STATE 0x84
#define OEM_GRP_CMD_SET_POWER_STATE 0x82
#define IPMI_NETFN_OEM_8 0xf8
#define OEM_GRP_CMD_REQUEST_HOTSWAP_CTRL 0x80
#define OEM_GRP_CMD_GET_SLOT_GA 0xa3
#define IPMI_NETFN_SENSOR_EVT 0x10
#define IPMI_CMD_GET_EVENT_RECEIVER 0x01
#define IPMI_CPI1_PRODUCT_ID 0x000157
#define IPMI_CPI1_MANUFACTURER_ID 0x0108
static int ipmi_cpi1_detect (ipmi_user_t user)
{
return ((mfg_id == IPMI_CPI1_MANUFACTURER_ID)
&& (prod_id == IPMI_CPI1_PRODUCT_ID));
}
static void ipmi_poweroff_cpi1 (ipmi_user_t user)
{
struct ipmi_system_interface_addr smi_addr;
struct ipmi_ipmb_addr ipmb_addr;
struct kernel_ipmi_msg send_msg;
int rv;
unsigned char data[1];
int slot;
unsigned char hotswap_ipmb;
unsigned char aer_addr;
unsigned char aer_lun;
/*
* Configure IPMI address for local access
*/
smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
smi_addr.channel = IPMI_BMC_CHANNEL;
smi_addr.lun = 0;
printk(KERN_INFO PFX "Powering down via CPI1 power command\n");
/*
* Get IPMI ipmb address
*/
send_msg.netfn = IPMI_NETFN_OEM_8 >> 2;
send_msg.cmd = OEM_GRP_CMD_GET_SLOT_GA;
send_msg.data = NULL;
send_msg.data_len = 0;
rv = ipmi_request_in_rc_mode(user,
(struct ipmi_addr *) &smi_addr,
&send_msg);
if (rv)
goto out;
slot = halt_recv_msg.msg.data[1];
hotswap_ipmb = (slot > 9) ? (0xb0 + 2 * slot) : (0xae + 2 * slot);
/*
* Get active event receiver
*/
send_msg.netfn = IPMI_NETFN_SENSOR_EVT >> 2;
send_msg.cmd = IPMI_CMD_GET_EVENT_RECEIVER;
send_msg.data = NULL;
send_msg.data_len = 0;
rv = ipmi_request_in_rc_mode(user,
(struct ipmi_addr *) &smi_addr,
&send_msg);
if (rv)
goto out;
aer_addr = halt_recv_msg.msg.data[1];
aer_lun = halt_recv_msg.msg.data[2];
/*
* Setup IPMB address target instead of local target
*/
ipmb_addr.addr_type = IPMI_IPMB_ADDR_TYPE;
ipmb_addr.channel = 0;
ipmb_addr.slave_addr = aer_addr;
ipmb_addr.lun = aer_lun;
/*
* Send request hotswap control to remove blade from dpv
*/
send_msg.netfn = IPMI_NETFN_OEM_8 >> 2;
send_msg.cmd = OEM_GRP_CMD_REQUEST_HOTSWAP_CTRL;
send_msg.data = &hotswap_ipmb;
send_msg.data_len = 1;
ipmi_request_in_rc_mode(user,
(struct ipmi_addr *) &ipmb_addr,
&send_msg);
/*
* Set reset asserted
*/
send_msg.netfn = IPMI_NETFN_OEM_1 >> 2;
send_msg.cmd = OEM_GRP_CMD_SET_RESET_STATE;
send_msg.data = data;
data[0] = 1; /* Reset asserted state */
send_msg.data_len = 1;
rv = ipmi_request_in_rc_mode(user,
(struct ipmi_addr *) &smi_addr,
&send_msg);
if (rv)
goto out;
/*
* Power down
*/
send_msg.netfn = IPMI_NETFN_OEM_1 >> 2;
send_msg.cmd = OEM_GRP_CMD_SET_POWER_STATE;
send_msg.data = data;
data[0] = 1; /* Power down state */
send_msg.data_len = 1;
rv = ipmi_request_in_rc_mode(user,
(struct ipmi_addr *) &smi_addr,
&send_msg);
if (rv)
goto out;
out:
return;
}
/*
* ipmi_dell_chassis_detect()
* Dell systems with IPMI < 1.5 don't set the chassis capability bit
* but they can handle a chassis poweroff or powercycle command.
*/
#define DELL_IANA_MFR_ID {0xA2, 0x02, 0x00}
static int ipmi_dell_chassis_detect (ipmi_user_t user)
{
const char ipmi_version_major = ipmi_version & 0xF;
const char ipmi_version_minor = (ipmi_version >> 4) & 0xF;
const char mfr[3]=DELL_IANA_MFR_ID;
if (!memcmp(mfr, &mfg_id, sizeof(mfr)) &&
ipmi_version_major <= 1 &&
ipmi_version_minor < 5)
return 1;
return 0;
}
/*
* Standard chassis support
*/
#define IPMI_NETFN_CHASSIS_REQUEST 0
#define IPMI_CHASSIS_CONTROL_CMD 0x02
static int ipmi_chassis_detect (ipmi_user_t user)
{
/* Chassis support, use it. */
return (capabilities & 0x80);
}
static void ipmi_poweroff_chassis (ipmi_user_t user)
{
struct ipmi_system_interface_addr smi_addr;
struct kernel_ipmi_msg send_msg;
int rv;
unsigned char data[1];
/*
* Configure IPMI address for local access
*/
smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
smi_addr.channel = IPMI_BMC_CHANNEL;
smi_addr.lun = 0;
powercyclefailed:
printk(KERN_INFO PFX "Powering %s via IPMI chassis control command\n",
(poweroff_powercycle ? "cycle" : "down"));
/*
* Power down
*/
send_msg.netfn = IPMI_NETFN_CHASSIS_REQUEST;
send_msg.cmd = IPMI_CHASSIS_CONTROL_CMD;
if (poweroff_powercycle)
data[0] = IPMI_CHASSIS_POWER_CYCLE;
else
data[0] = IPMI_CHASSIS_POWER_DOWN;
send_msg.data = data;
send_msg.data_len = sizeof(data);
rv = ipmi_request_in_rc_mode(user,
(struct ipmi_addr *) &smi_addr,
&send_msg);
if (rv) {
if (poweroff_powercycle) {
/* power cycle failed, default to power down */
printk(KERN_ERR PFX "Unable to send chassis power " \
"cycle message, IPMI error 0x%x\n", rv);
poweroff_powercycle = 0;
goto powercyclefailed;
}
printk(KERN_ERR PFX "Unable to send chassis power " \
"down message, IPMI error 0x%x\n", rv);
}
}
/* Table of possible power off functions. */
struct poweroff_function {
char *platform_type;
int (*detect)(ipmi_user_t user);
void (*poweroff_func)(ipmi_user_t user);
};
static struct poweroff_function poweroff_functions[] = {
{ .platform_type = "ATCA",
.detect = ipmi_atca_detect,
.poweroff_func = ipmi_poweroff_atca },
{ .platform_type = "CPI1",
.detect = ipmi_cpi1_detect,
.poweroff_func = ipmi_poweroff_cpi1 },
{ .platform_type = "chassis",
.detect = ipmi_dell_chassis_detect,
.poweroff_func = ipmi_poweroff_chassis },
/* Chassis should generally be last, other things should override
it. */
{ .platform_type = "chassis",
.detect = ipmi_chassis_detect,
.poweroff_func = ipmi_poweroff_chassis },
};
#define NUM_PO_FUNCS (sizeof(poweroff_functions) \
/ sizeof(struct poweroff_function))
/* Our local state. */
static int ready = 0;
static ipmi_user_t ipmi_user;
static void (*specific_poweroff_func)(ipmi_user_t user) = NULL;
/* Holds the old poweroff function so we can restore it on removal. */
static void (*old_poweroff_func)(void);
/* Called on a powerdown request. */
static void ipmi_poweroff_function (void)
{
if (!ready)
return;
/* Use run-to-completion mode, since interrupts may be off. */
ipmi_user_set_run_to_completion(ipmi_user, 1);
specific_poweroff_func(ipmi_user);
ipmi_user_set_run_to_completion(ipmi_user, 0);
}
/* Wait for an IPMI interface to be installed, the first one installed
will be grabbed by this code and used to perform the powerdown. */
static void ipmi_po_new_smi(int if_num)
{
struct ipmi_system_interface_addr smi_addr;
struct kernel_ipmi_msg send_msg;
int rv;
int i;
if (ready)
return;
rv = ipmi_create_user(if_num, &ipmi_poweroff_handler, NULL,
&ipmi_user);
if (rv) {
printk(KERN_ERR PFX "could not create IPMI user, error %d\n",
rv);
return;
}
/*
* Do a get device ide and store some results, since this is
* used by several functions.
*/
smi_addr.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
smi_addr.channel = IPMI_BMC_CHANNEL;
smi_addr.lun = 0;
send_msg.netfn = IPMI_NETFN_APP_REQUEST;
send_msg.cmd = IPMI_GET_DEVICE_ID_CMD;
send_msg.data = NULL;
send_msg.data_len = 0;
rv = ipmi_request_wait_for_response(ipmi_user,
(struct ipmi_addr *) &smi_addr,
&send_msg);
if (rv) {
printk(KERN_ERR PFX "Unable to send IPMI get device id info,"
" IPMI error 0x%x\n", rv);
goto out_err;
}
if (halt_recv_msg.msg.data_len < 12) {
printk(KERN_ERR PFX "(chassis) IPMI get device id info too,"
" short, was %d bytes, needed %d bytes\n",
halt_recv_msg.msg.data_len, 12);
goto out_err;
}
mfg_id = (halt_recv_msg.msg.data[7]
| (halt_recv_msg.msg.data[8] << 8)
| (halt_recv_msg.msg.data[9] << 16));
prod_id = (halt_recv_msg.msg.data[10]
| (halt_recv_msg.msg.data[11] << 8));
capabilities = halt_recv_msg.msg.data[6];
ipmi_version = halt_recv_msg.msg.data[5];
/* Scan for a poweroff method */
for (i = 0; i < NUM_PO_FUNCS; i++) {
if (poweroff_functions[i].detect(ipmi_user))
goto found;
}
out_err:
printk(KERN_ERR PFX "Unable to find a poweroff function that"
" will work, giving up\n");
ipmi_destroy_user(ipmi_user);
return;
found:
printk(KERN_INFO PFX "Found a %s style poweroff function\n",
poweroff_functions[i].platform_type);
specific_poweroff_func = poweroff_functions[i].poweroff_func;
old_poweroff_func = pm_power_off;
pm_power_off = ipmi_poweroff_function;
ready = 1;
}
static void ipmi_po_smi_gone(int if_num)
{
/* This can never be called, because once poweroff driver is
registered, the interface can't go away until the power
driver is unregistered. */
}
static struct ipmi_smi_watcher smi_watcher =
{
.owner = THIS_MODULE,
.new_smi = ipmi_po_new_smi,
.smi_gone = ipmi_po_smi_gone
};
#ifdef CONFIG_PROC_FS
#include <linux/sysctl.h>
static ctl_table ipmi_table[] = {
{ .ctl_name = DEV_IPMI_POWEROFF_POWERCYCLE,
.procname = "poweroff_powercycle",
.data = &poweroff_powercycle,
.maxlen = sizeof(poweroff_powercycle),
.mode = 0644,
.proc_handler = &proc_dointvec },
{ }
};
static ctl_table ipmi_dir_table[] = {
{ .ctl_name = DEV_IPMI,
.procname = "ipmi",
.mode = 0555,
.child = ipmi_table },
{ }
};
static ctl_table ipmi_root_table[] = {
{ .ctl_name = CTL_DEV,
.procname = "dev",
.mode = 0555,
.child = ipmi_dir_table },
{ }
};
static struct ctl_table_header *ipmi_table_header;
#endif /* CONFIG_PROC_FS */
/*
* Startup and shutdown functions.
*/
static int ipmi_poweroff_init (void)
{
int rv;
printk ("Copyright (C) 2004 MontaVista Software -"
" IPMI Powerdown via sys_reboot.\n");
if (poweroff_powercycle)
printk(KERN_INFO PFX "Power cycle is enabled.\n");
#ifdef CONFIG_PROC_FS
ipmi_table_header = register_sysctl_table(ipmi_root_table, 1);
if (!ipmi_table_header) {
printk(KERN_ERR PFX "Unable to register powercycle sysctl\n");
rv = -ENOMEM;
goto out_err;
}
#endif
#ifdef CONFIG_PROC_FS
rv = ipmi_smi_watcher_register(&smi_watcher);
#endif
if (rv) {
unregister_sysctl_table(ipmi_table_header);
printk(KERN_ERR PFX "Unable to register SMI watcher: %d\n", rv);
goto out_err;
}
out_err:
return rv;
}
#ifdef MODULE
static __exit void ipmi_poweroff_cleanup(void)
{
int rv;
#ifdef CONFIG_PROC_FS
unregister_sysctl_table(ipmi_table_header);
#endif
ipmi_smi_watcher_unregister(&smi_watcher);
if (ready) {
rv = ipmi_destroy_user(ipmi_user);
if (rv)
printk(KERN_ERR PFX "could not cleanup the IPMI"
" user: 0x%x\n", rv);
pm_power_off = old_poweroff_func;
}
}
module_exit(ipmi_poweroff_cleanup);
#endif
module_init(ipmi_poweroff_init);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>");
MODULE_DESCRIPTION("IPMI Poweroff extension to sys_reboot");
