/******************************************************************************
*
* Module Name: exoparg2 - AML execution - opcodes with 2 arguments
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2005, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include <acpi/acparser.h>
#include <acpi/acinterp.h>
#include <acpi/acevents.h>
#include <acpi/amlcode.h>
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME ("exoparg2")
/*!
* Naming convention for AML interpreter execution routines.
*
* The routines that begin execution of AML opcodes are named with a common
* convention based upon the number of arguments, the number of target operands,
* and whether or not a value is returned:
*
* AcpiExOpcode_xA_yT_zR
*
* Where:
*
* xA - ARGUMENTS: The number of arguments (input operands) that are
* required for this opcode type (1 through 6 args).
* yT - TARGETS: The number of targets (output operands) that are required
* for this opcode type (0, 1, or 2 targets).
* zR - RETURN VALUE: Indicates whether this opcode type returns a value
* as the function return (0 or 1).
*
* The AcpiExOpcode* functions are called via the Dispatcher component with
* fully resolved operands.
!*/
/*******************************************************************************
*
* FUNCTION: acpi_ex_opcode_2A_0T_0R
*
* PARAMETERS: walk_state - Current walk state
*
* RETURN: Status
*
* DESCRIPTION: Execute opcode with two arguments, no target, and no return
* value.
*
* ALLOCATION: Deletes both operands
*
******************************************************************************/
acpi_status
acpi_ex_opcode_2A_0T_0R (
struct acpi_walk_state *walk_state)
{
union acpi_operand_object **operand = &walk_state->operands[0];
struct acpi_namespace_node *node;
u32 value;
acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE_STR ("ex_opcode_2A_0T_0R",
acpi_ps_get_opcode_name (walk_state->opcode));
/* Examine the opcode */
switch (walk_state->opcode) {
case AML_NOTIFY_OP: /* Notify (notify_object, notify_value) */
/* The first operand is a namespace node */
node = (struct acpi_namespace_node *) operand[0];
/* Second value is the notify value */
value = (u32) operand[1]->integer.value;
/* Notifies allowed on this object? */
if (!acpi_ev_is_notify_object (node)) {
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Unexpected notify object type [%s]\n",
acpi_ut_get_type_name (node->type)));
status = AE_AML_OPERAND_TYPE;
break;
}
#ifdef ACPI_GPE_NOTIFY_CHECK
/*
* GPE method wake/notify check. Here, we want to ensure that we
* don't receive any "device_wake" Notifies from a GPE _Lxx or _Exx
* GPE method during system runtime. If we do, the GPE is marked
* as "wake-only" and disabled.
*
* 1) Is the Notify() value == device_wake?
* 2) Is this a GPE deferred method? (An _Lxx or _Exx method)
* 3) Did the original GPE happen at system runtime?
* (versus during wake)
*
* If all three cases are true, this is a wake-only GPE that should
* be disabled at runtime.
*/
if (value == 2) /* device_wake */ {
status = acpi_ev_check_for_wake_only_gpe (walk_state->gpe_event_info);
if (ACPI_FAILURE (status)) {
/* AE_WAKE_ONLY_GPE only error, means ignore this notify */
return_ACPI_STATUS (AE_OK)
}
}
#endif
/*
* Dispatch the notify to the appropriate handler
* NOTE: the request is queued for execution after this method
* completes. The notify handlers are NOT invoked synchronously
* from this thread -- because handlers may in turn run other
* control methods.
*/
status = acpi_ev_queue_notify_request (node, value);
break;
default:
ACPI_REPORT_ERROR (("acpi_ex_opcode_2A_0T_0R: Unknown opcode %X\n",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
}
return_ACPI_STATUS (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_opcode_2A_2T_1R
*
* PARAMETERS: walk_state - Current walk state
*
* RETURN: Status
*
* DESCRIPTION: Execute a dyadic operator (2 operands) with 2 output targets
* and one implicit return value.
*
******************************************************************************/
acpi_status
acpi_ex_opcode_2A_2T_1R (
struct acpi_walk_state *walk_state)
{
union acpi_operand_object **operand = &walk_state->operands[0];
union acpi_operand_object *return_desc1 = NULL;
union acpi_operand_object *return_desc2 = NULL;
acpi_status status;
ACPI_FUNCTION_TRACE_STR ("ex_opcode_2A_2T_1R",
acpi_ps_get_opcode_name (walk_state->opcode));
/*
* Execute the opcode
*/
switch (walk_state->opcode) {
case AML_DIVIDE_OP: /* Divide (Dividend, Divisor, remainder_result quotient_result) */
return_desc1 = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
if (!return_desc1) {
status = AE_NO_MEMORY;
goto cleanup;
}
return_desc2 = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
if (!return_desc2) {
status = AE_NO_MEMORY;
goto cleanup;
}
/* Quotient to return_desc1, remainder to return_desc2 */
status = acpi_ut_divide (operand[0]->integer.value,
operand[1]->integer.value,
&return_desc1->integer.value,
&return_desc2->integer.value);
if (ACPI_FAILURE (status)) {
goto cleanup;
}
break;
default:
ACPI_REPORT_ERROR (("acpi_ex_opcode_2A_2T_1R: Unknown opcode %X\n",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
}
/* Store the results to the target reference operands */
status = acpi_ex_store (return_desc2, operand[2], walk_state);
if (ACPI_FAILURE (status)) {
goto cleanup;
}
status = acpi_ex_store (return_desc1, operand[3], walk_state);
if (ACPI_FAILURE (status)) {
goto cleanup;
}
/* Return the remainder */
walk_state->result_obj = return_desc1;
cleanup:
/*
* Since the remainder is not returned indirectly, remove a reference to
* it. Only the quotient is returned indirectly.
*/
acpi_ut_remove_reference (return_desc2);
if (ACPI_FAILURE (status)) {
/* Delete the return object */
acpi_ut_remove_reference (return_desc1);
}
return_ACPI_STATUS (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_opcode_2A_1T_1R
*
* PARAMETERS: walk_state - Current walk state
*
* RETURN: Status
*
* DESCRIPTION: Execute opcode with two arguments, one target, and a return
* value.
*
******************************************************************************/
acpi_status
acpi_ex_opcode_2A_1T_1R (
struct acpi_walk_state *walk_state)
{
union acpi_operand_object **operand = &walk_state->operands[0];
union acpi_operand_object *return_desc = NULL;
u32 index;
acpi_status status = AE_OK;
acpi_size length;
ACPI_FUNCTION_TRACE_STR ("ex_opcode_2A_1T_1R",
acpi_ps_get_opcode_name (walk_state->opcode));
/*
* Execute the opcode
*/
if (walk_state->op_info->flags & AML_MATH) {
/* All simple math opcodes (add, etc.) */
return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
}
return_desc->integer.value = acpi_ex_do_math_op (walk_state->opcode,
operand[0]->integer.value,
operand[1]->integer.value);
goto store_result_to_target;
}
switch (walk_state->opcode) {
case AML_MOD_OP: /* Mod (Dividend, Divisor, remainder_result (ACPI 2.0) */
return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
}
/* return_desc will contain the remainder */
status = acpi_ut_divide (operand[0]->integer.value,
operand[1]->integer.value,
NULL,
&return_desc->integer.value);
break;
case AML_CONCAT_OP: /* Concatenate (Data1, Data2, Result) */
status = acpi_ex_do_concatenate (operand[0], operand[1],
&return_desc, walk_state);
break;
case AML_TO_STRING_OP: /* to_string (Buffer, Length, Result) (ACPI 2.0) */
/*
* Input object is guaranteed to be a buffer at this point (it may have
* been converted.) Copy the raw buffer data to a new object of type String.
*/
/*
* Get the length of the new string. It is the smallest of:
* 1) Length of the input buffer
* 2) Max length as specified in the to_string operator
* 3) Length of input buffer up to a zero byte (null terminator)
*
* NOTE: A length of zero is ok, and will create a zero-length, null
* terminated string.
*/
length = 0;
while ((length < operand[0]->buffer.length) &&
(length < operand[1]->integer.value) &&
(operand[0]->buffer.pointer[length])) {
length++;
if (length > ACPI_MAX_STRING_CONVERSION) {
status = AE_AML_STRING_LIMIT;
goto cleanup;
}
}
/* Allocate a new string object */
return_desc = acpi_ut_create_string_object (length);
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
}
/* Copy the raw buffer data with no transform. NULL terminated already. */
ACPI_MEMCPY (return_desc->string.pointer,
operand[0]->buffer.pointer, length);
break;
case AML_CONCAT_RES_OP: /* concatenate_res_template (Buffer, Buffer, Result) (ACPI 2.0) */
status = acpi_ex_concat_template (operand[0], operand[1],
&return_desc, walk_state);
break;
case AML_INDEX_OP: /* Index (Source Index Result) */
/* Create the internal return object */
return_desc = acpi_ut_create_internal_object (ACPI_TYPE_LOCAL_REFERENCE);
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
}
index = (u32) operand[1]->integer.value;
/*
* At this point, the Source operand is a Package, Buffer, or String
*/
if (ACPI_GET_OBJECT_TYPE (operand[0]) == ACPI_TYPE_PACKAGE) {
/* Object to be indexed is a Package */
if (index >= operand[0]->package.count) {
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Index value (%X) beyond package end (%X)\n",
index, operand[0]->package.count));
status = AE_AML_PACKAGE_LIMIT;
goto cleanup;
}
return_desc->reference.target_type = ACPI_TYPE_PACKAGE;
return_desc->reference.object = operand[0];
return_desc->reference.where = &operand[0]->package.elements [index];
}
else {
/* Object to be indexed is a Buffer/String */
if (index >= operand[0]->buffer.length) {
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Index value (%X) beyond end of buffer (%X)\n",
index, operand[0]->buffer.length));
status = AE_AML_BUFFER_LIMIT;
goto cleanup;
}
return_desc->reference.target_type = ACPI_TYPE_BUFFER_FIELD;
return_desc->reference.object = operand[0];
}
/*
* Add a reference to the target package/buffer/string for the life
* of the index.
*/
acpi_ut_add_reference (operand[0]);
/* Complete the Index reference object */
return_desc->reference.opcode = AML_INDEX_OP;
return_desc->reference.offset = index;
/* Store the reference to the Target */
status = acpi_ex_store (return_desc, operand[2], walk_state);
/* Return the reference */
walk_state->result_obj = return_desc;
goto cleanup;
default:
ACPI_REPORT_ERROR (("acpi_ex_opcode_2A_1T_1R: Unknown opcode %X\n",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
break;
}
store_result_to_target:
if (ACPI_SUCCESS (status)) {
/*
* Store the result of the operation (which is now in return_desc) into
* the Target descriptor.
*/
status = acpi_ex_store (return_desc, operand[2], walk_state);
if (ACPI_FAILURE (status)) {
goto cleanup;
}
if (!walk_state->result_obj) {
walk_state->result_obj = return_desc;
}
}
cleanup:
/* Delete return object on error */
if (ACPI_FAILURE (status)) {
acpi_ut_remove_reference (return_desc);
}
return_ACPI_STATUS (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_opcode_2A_0T_1R
*
* PARAMETERS: walk_state - Current walk state
*
* RETURN: Status
*
* DESCRIPTION: Execute opcode with 2 arguments, no target, and a return value
*
******************************************************************************/
acpi_status
acpi_ex_opcode_2A_0T_1R (
struct acpi_walk_state *walk_state)
{
union acpi_operand_object **operand = &walk_state->operands[0];
union acpi_operand_object *return_desc = NULL;
acpi_status status = AE_OK;
u8 logical_result = FALSE;
ACPI_FUNCTION_TRACE_STR ("ex_opcode_2A_0T_1R",
acpi_ps_get_opcode_name (walk_state->opcode));
/* Create the internal return object */
return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
if (!return_desc) {
status = AE_NO_MEMORY;
goto cleanup;
}
/*
* Execute the Opcode
*/
if (walk_state->op_info->flags & AML_LOGICAL_NUMERIC) /* logical_op (Operand0, Operand1) */ {
status = acpi_ex_do_logical_numeric_op (walk_state->opcode,
operand[0]->integer.value, operand[1]->integer.value,
&logical_result);
goto store_logical_result;
}
else if (walk_state->op_info->flags & AML_LOGICAL) /* logical_op (Operand0, Operand1) */ {
status = acpi_ex_do_logical_op (walk_state->opcode, operand[0],
operand[1], &logical_result);
goto store_logical_result;
}
switch (walk_state->opcode) {
case AML_ACQUIRE_OP: /* Acquire (mutex_object, Timeout) */
status = acpi_ex_acquire_mutex (operand[1], operand[0], walk_state);
if (status == AE_TIME) {
logical_result = TRUE; /* TRUE = Acquire timed out */
status = AE_OK;
}
break;
case AML_WAIT_OP: /* Wait (event_object, Timeout) */
status = acpi_ex_system_wait_event (operand[1], operand[0]);
if (status == AE_TIME) {
logical_result = TRUE; /* TRUE, Wait timed out */
status = AE_OK;
}
break;
default:
ACPI_REPORT_ERROR (("acpi_ex_opcode_2A_0T_1R: Unknown opcode %X\n",
walk_state->opcode));
status = AE_AML_BAD_OPCODE;
goto cleanup;
}
store_logical_result:
/*
* Set return value to according to logical_result. logical TRUE (all ones)
* Default is FALSE (zero)
*/
if (logical_result) {
return_desc->integer.value = ACPI_INTEGER_MAX;
}
walk_state->result_obj = return_desc;
cleanup:
/* Delete return object on error */
if (ACPI_FAILURE (status)) {
acpi_ut_remove_reference (return_desc);
}
return_ACPI_STATUS (status);
}
