#include <linux/sched.h>
#include <linux/clocksource.h>
#include <linux/workqueue.h>
#include <linux/cpufreq.h>
#include <linux/jiffies.h>
#include <linux/init.h>
#include <linux/dmi.h>
#include <asm/delay.h>
#include <asm/tsc.h>
#include <asm/io.h>
#include <asm/timer.h>
#include "mach_timer.h"
static int tsc_enabled;
/*
* On some systems the TSC frequency does not
* change with the cpu frequency. So we need
* an extra value to store the TSC freq
*/
unsigned int tsc_khz;
EXPORT_SYMBOL_GPL(tsc_khz);
int tsc_disable;
#ifdef CONFIG_X86_TSC
static int __init tsc_setup(char *str)
{
printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
"cannot disable TSC.\n");
return 1;
}
#else
/*
* disable flag for tsc. Takes effect by clearing the TSC cpu flag
* in cpu/common.c
*/
static int __init tsc_setup(char *str)
{
tsc_disable = 1;
return 1;
}
#endif
__setup("notsc", tsc_setup);
/*
* code to mark and check if the TSC is unstable
* due to cpufreq or due to unsynced TSCs
*/
static int tsc_unstable;
int check_tsc_unstable(void)
{
return tsc_unstable;
}
EXPORT_SYMBOL_GPL(check_tsc_unstable);
/* Accellerators for sched_clock()
* convert from cycles(64bits) => nanoseconds (64bits)
* basic equation:
* ns = cycles / (freq / ns_per_sec)
* ns = cycles * (ns_per_sec / freq)
* ns = cycles * (10^9 / (cpu_khz * 10^3))
* ns = cycles * (10^6 / cpu_khz)
*
* Then we use scaling math (suggested by george@mvista.com) to get:
* ns = cycles * (10^6 * SC / cpu_khz) / SC
* ns = cycles * cyc2ns_scale / SC
*
* And since SC is a constant power of two, we can convert the div
* into a shift.
*
* We can use khz divisor instead of mhz to keep a better percision, since
* cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
* (mathieu.desnoyers@polymtl.ca)
*
* -johnstul@us.ibm.com "math is hard, lets go shopping!"
*/
unsigned long cyc2ns_scale __read_mostly;
#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */
static inline void set_cyc2ns_scale(unsigned long cpu_khz)
{
cyc2ns_scale = (1000000 << CYC2NS_SCALE_FACTOR)/cpu_khz;
}
/*
* Scheduler clock - returns current time in nanosec units.
*/
unsigned long long native_sched_clock(void)
{
unsigned long long this_offset;
/*
* Fall back to jiffies if there's no TSC available:
* ( But note that we still use it if the TSC is marked
* unstable. We do this because unlike Time Of Day,
* the scheduler clock tolerates small errors and it's
* very important for it to be as fast as the platform
* can achive it. )
*/
if (unlikely(!tsc_enabled && !tsc_unstable))
/* No locking but a rare wrong value is not a big deal: */
return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
/* read the Time Stamp Counter: */
rdtscll(this_offset);
/* return the value in ns */
return cycles_2_ns(this_offset);
}
/* We need to define a real function for sched_clock, to override the
weak default version */
#ifdef CONFIG_PARAVIRT
unsigned long long sched_clock(void)
{
return paravirt_sched_clock();
}
#else
unsigned long long sched_clock(void)
__attribute__((alias("native_sched_clock")));
#endif
unsigned long native_calculate_cpu_khz(void)
{
unsigned long long start, end;
unsigned long count;
u64 delta64;
int i;
unsigned long flags;
local_irq_save(flags);
/* run 3 times to ensure the cache is warm */
for (i = 0; i < 3; i++) {
mach_prepare_counter();
rdtscll(start);
mach_countup(&count);
rdtscll(end);
}
/*
* Error: ECTCNEVERSET
* The CTC wasn't reliable: we got a hit on the very first read,
* or the CPU was so fast/slow that the quotient wouldn't fit in
* 32 bits..
*/
if (count <= 1)
goto err;
delta64 = end - start;
/* cpu freq too fast: */
if (delta64 > (1ULL<<32))
goto err;
/* cpu freq too slow: */
if (delta64 <= CALIBRATE_TIME_MSEC)
goto err;
delta64 += CALIBRATE_TIME_MSEC/2; /* round for do_div */
do_div(delta64,CALIBRATE_TIME_MSEC);
local_irq_restore(flags);
return (unsigned long)delta64;
err:
local_irq_restore(flags);
return 0;
}
int recalibrate_cpu_khz(void)
{
#ifndef CONFIG_SMP
unsigned long cpu_khz_old = cpu_khz;
if (cpu_has_tsc) {
cpu_khz = calculate_cpu_khz();
tsc_khz = cpu_khz;
cpu_data[0].loops_per_jiffy =
cpufreq_scale(cpu_data[0].loops_per_jiffy,
cpu_khz_old, cpu_khz);
return 0;
} else
return -ENODEV;
#else
return -ENODEV;
#endif
}
EXPORT_SYMBOL(recalibrate_cpu_khz);
#ifdef CONFIG_CPU_FREQ
/*
* if the CPU frequency is scaled, TSC-based delays will need a different
* loops_per_jiffy value to function properly.
*/
static unsigned int ref_freq = 0;
static unsigned long loops_per_jiffy_ref = 0;
static unsigned long cpu_khz_ref = 0;
static int
time_cpufreq_notifier(struct notifier_block *nb, unsigned long val, void *data)
{
struct cpufreq_freqs *freq = data;
if (!ref_freq) {
if (!freq->old){
ref_freq = freq->new;
return 0;
}
ref_freq = freq->old;
loops_per_jiffy_ref = cpu_data[freq->cpu].loops_per_jiffy;
cpu_khz_ref = cpu_khz;
}
if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) ||
(val == CPUFREQ_POSTCHANGE && freq->old > freq->new) ||
(val == CPUFREQ_RESUMECHANGE)) {
if (!(freq->flags & CPUFREQ_CONST_LOOPS))
cpu_data[freq->cpu].loops_per_jiffy =
cpufreq_scale(loops_per_jiffy_ref,
ref_freq, freq->new);
if (cpu_khz) {
if (num_online_cpus() == 1)
cpu_khz = cpufreq_scale(cpu_khz_ref,
ref_freq, freq->new);
if (!(freq->flags & CPUFREQ_CONST_LOOPS)) {
tsc_khz = cpu_khz;
set_cyc2ns_scale(cpu_khz);
/*
* TSC based sched_clock turns
* to junk w/ cpufreq
*/
mark_tsc_unstable("cpufreq changes");
}
}
}
return 0;
}
static struct notifier_block time_cpufreq_notifier_block = {
.notifier_call = time_cpufreq_notifier
};
static int __init cpufreq_tsc(void)
{
return cpufreq_register_notifier(&time_cpufreq_notifier_block,
CPUFREQ_TRANSITION_NOTIFIER);
}
core_initcall(cpufreq_tsc);
#endif
/* clock source code */
static unsigned long current_tsc_khz = 0;
static cycle_t read_tsc(void)
{
cycle_t ret;
rdtscll(ret);
return ret;
}
static struct clocksource clocksource_tsc = {
.name = "tsc",
.rating = 300,
.read = read_tsc,
.mask = CLOCKSOURCE_MASK(64),
.mult = 0, /* to be set */
.shift = 22,
.flags = CLOCK_SOURCE_IS_CONTINUOUS |
CLOCK_SOURCE_MUST_VERIFY,
};
void mark_tsc_unstable(char *reason)
{
if (!tsc_unstable) {
tsc_unstable = 1;
tsc_enabled = 0;
printk("Marking TSC unstable due to: %s.\n", reason);
/* Can be called before registration */
if (clocksource_tsc.mult)
clocksource_change_rating(&clocksource_tsc, 0);
else
clocksource_tsc.rating = 0;
}
}
EXPORT_SYMBOL_GPL(mark_tsc_unstable);
static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d)
{
printk(KERN_NOTICE "%s detected: marking TSC unstable.\n",
d->ident);
tsc_unstable = 1;
return 0;
}
/* List of systems that have known TSC problems */
static struct dmi_system_id __initdata bad_tsc_dmi_table[] = {
{
.callback = dmi_mark_tsc_unstable,
.ident = "IBM Thinkpad 380XD",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
DMI_MATCH(DMI_BOARD_NAME, "2635FA0"),
},
},
{}
};
/*
* Make an educated guess if the TSC is trustworthy and synchronized
* over all CPUs.
*/
__cpuinit int unsynchronized_tsc(void)
{
if (!cpu_has_tsc || tsc_unstable)
return 1;
/*
* Intel systems are normally all synchronized.
* Exceptions must mark TSC as unstable:
*/
if (boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) {
/* assume multi socket systems are not synchronized: */
if (num_possible_cpus() > 1)
tsc_unstable = 1;
}
return tsc_unstable;
}
/*
* Geode_LX - the OLPC CPU has a possibly a very reliable TSC
*/
#ifdef CONFIG_MGEODE_LX
/* RTSC counts during suspend */
#define RTSC_SUSP 0x100
static void __init check_geode_tsc_reliable(void)
{
unsigned long val;
rdmsrl(MSR_GEODE_BUSCONT_CONF0, val);
if ((val & RTSC_SUSP))
clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY;
}
#else
static inline void check_geode_tsc_reliable(void) { }
#endif
void __init tsc_init(void)
{
if (!cpu_has_tsc || tsc_disable)
goto out_no_tsc;
cpu_khz = calculate_cpu_khz();
tsc_khz = cpu_khz;
if (!cpu_khz)
goto out_no_tsc;
printk("Detected %lu.%03lu MHz processor.\n",
(unsigned long)cpu_khz / 1000,
(unsigned long)cpu_khz % 1000);
set_cyc2ns_scale(cpu_khz);
use_tsc_delay();
/* Check and install the TSC clocksource */
dmi_check_system(bad_tsc_dmi_table);
unsynchronized_tsc();
check_geode_tsc_reliable();
current_tsc_khz = tsc_khz;
clocksource_tsc.mult = clocksource_khz2mult(current_tsc_khz,
clocksource_tsc.shift);
/* lower the rating if we already know its unstable: */
if (check_tsc_unstable()) {
clocksource_tsc.rating = 0;
clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
} else
tsc_enabled = 1;
clocksource_register(&clocksource_tsc);
return;
out_no_tsc:
/*
* Set the tsc_disable flag if there's no TSC support, this
* makes it a fast flag for the kernel to see whether it
* should be using the TSC.
*/
tsc_disable = 1;
}