#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/random.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/sysdev.h>
#include <linux/bitops.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <asm/atomic.h>
#include <asm/system.h>
#include <asm/timer.h>
#include <asm/pgtable.h>
#include <asm/desc.h>
#include <asm/apic.h>
#include <asm/arch_hooks.h>
#include <asm/i8259.h>
#include <asm/traps.h>
/*
* Note that on a 486, we don't want to do a SIGFPE on an irq13
* as the irq is unreliable, and exception 16 works correctly
* (ie as explained in the intel literature). On a 386, you
* can't use exception 16 due to bad IBM design, so we have to
* rely on the less exact irq13.
*
* Careful.. Not only is IRQ13 unreliable, but it is also
* leads to races. IBM designers who came up with it should
* be shot.
*/
static irqreturn_t math_error_irq(int cpl, void *dev_id)
{
outb(0, 0xF0);
if (ignore_fpu_irq || !boot_cpu_data.hard_math)
return IRQ_NONE;
math_error((void __user *)get_irq_regs()->ip);
return IRQ_HANDLED;
}
/*
* New motherboards sometimes make IRQ 13 be a PCI interrupt,
* so allow interrupt sharing.
*/
static struct irqaction fpu_irq = {
.handler = math_error_irq,
.mask = CPU_MASK_NONE,
.name = "fpu",
};
void __init init_ISA_irqs(void)
{
int i;
#ifdef CONFIG_X86_LOCAL_APIC
init_bsp_APIC();
#endif
init_8259A(0);
/*
* 16 old-style INTA-cycle interrupts:
*/
for (i = 0; i < NR_IRQS_LEGACY; i++) {
struct irq_desc *desc = irq_to_desc(i);
desc->status = IRQ_DISABLED;
desc->action = NULL;
desc->depth = 1;
set_irq_chip_and_handler_name(i, &i8259A_chip,
handle_level_irq, "XT");
}
}
DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
[0 ... IRQ0_VECTOR - 1] = -1,
[IRQ0_VECTOR] = 0,
[IRQ1_VECTOR] = 1,
[IRQ2_VECTOR] = 2,
[IRQ3_VECTOR] = 3,
[IRQ4_VECTOR] = 4,
[IRQ5_VECTOR] = 5,
[IRQ6_VECTOR] = 6,
[IRQ7_VECTOR] = 7,
[IRQ8_VECTOR] = 8,
[IRQ9_VECTOR] = 9,
[IRQ10_VECTOR] = 10,
[IRQ11_VECTOR] = 11,
[IRQ12_VECTOR] = 12,
[IRQ13_VECTOR] = 13,
[IRQ14_VECTOR] = 14,
[IRQ15_VECTOR] = 15,
[IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
};
int vector_used_by_percpu_irq(unsigned int vector)
{
int cpu;
for_each_online_cpu(cpu) {
if (per_cpu(vector_irq, cpu)[vector] != -1)
return 1;
}
return 0;
}
/* Overridden in paravirt.c */
void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
void __init native_init_IRQ(void)
{
int i;
/* all the set up before the call gates are initialised */
pre_intr_init_hook();
/*
* Cover the whole vector space, no vector can escape
* us. (some of these will be overridden and become
* 'special' SMP interrupts)
*/
for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
/* SYSCALL_VECTOR was reserved in trap_init. */
if (i != SYSCALL_VECTOR)
set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
}
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP)
/*
* The reschedule interrupt is a CPU-to-CPU reschedule-helper
* IPI, driven by wakeup.
*/
alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
/* IPI for invalidation */
alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt);
/* IPI for generic function call */
alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
/* IPI for single call function */
alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
call_function_single_interrupt);
/* Low priority IPI to cleanup after moving an irq */
set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
#endif
#ifdef CONFIG_X86_LOCAL_APIC
/* self generated IPI for local APIC timer */
alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
/* IPI vectors for APIC spurious and error interrupts */
alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
#endif
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL)
/* thermal monitor LVT interrupt */
alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
#endif
/* setup after call gates are initialised (usually add in
* the architecture specific gates)
*/
intr_init_hook();
/*
* External FPU? Set up irq13 if so, for
* original braindamaged IBM FERR coupling.
*/
if (boot_cpu_data.hard_math && !cpu_has_fpu)
setup_irq(FPU_IRQ, &fpu_irq);
irq_ctx_init(smp_processor_id());
}
