#
# arch/x86/boot/Makefile
#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1994 by Linus Torvalds
#
# ROOT_DEV specifies the default root-device when making the image.
# This can be either FLOPPY, CURRENT, /dev/xxxx or empty, in which case
# the default of FLOPPY is used by 'build'.
ROOT_DEV := CURRENT
# If you want to preset the SVGA mode, uncomment the next line and
# set SVGA_MODE to whatever number you want.
# Set it to -DSVGA_MODE=NORMAL_VGA if you just want the EGA/VGA mode.
# The number is the same as you would ordinarily press at bootup.
SVGA_MODE := -DSVGA_MODE=NORMAL_VGA
# If you want the RAM disk device, define this to be the size in blocks.
#RAMDISK := -DRAMDISK=512
targets := vmlinux.bin setup.bin setup.elf zImage bzImage
subdir- := compressed
setup-y += a20.o cmdline.o copy.o cpu.o cpucheck.o edd.o
setup-y += header.o main.o mca.o memory.o pm.o pmjump.o
setup-y += printf.o string.o tty.o video.o version.o
setup-$(CONFIG_X86_APM_BOOT) += apm.o
setup-$(CONFIG_X86_VOYAGER) += voyager.o
# The link order of the video-*.o modules can matter. In particular,
# video-vga.o *must* be listed first, followed by video-vesa.o.
# Hardware-specific drivers should follow in the order they should be
# probed, and video-bios.o should typically be last.
setup-y += video-vga.o
setup-y += video-vesa.o
setup-y += video-bios.o
targets += $(setup-y)
hostprogs-y := mkcpustr tools/build
HOST_EXTRACFLAGS += $(LINUXINCLUDE)
$(obj)/cpu.o: $(obj)/cpustr.h
quiet_cmd_cpustr = CPUSTR $@
cmd_cpustr = $(obj)/mkcpustr > $@
targets += cpustr.h
$(obj)/cpustr.h: $(obj)/mkcpustr FORCE
$(call if_changed,cpustr)
# ---------------------------------------------------------------------------
# How to compile the 16-bit code. Note we always compile for -march=i386,
# that way we can complain to the user if the CPU is insufficient.
KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D__KERNEL__ \
-Wall -Wstrict-prototypes \
-march=i386 -mregparm=3 \
-include $(srctree)/$(src)/code16gcc.h \
-fno-strict-aliasing -fomit-frame-pointer \
$(call cc-option, -ffreestanding) \
$(call cc-option, -fno-toplevel-reorder,\
$(call cc-option, -fno-unit-at-a-time)) \
$(call cc-option, -fno-stack-protector) \
$(call cc-option, -mpreferred-stack-boundary=2)
KBUILD_CFLAGS += $(call cc-option,-m32)
KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__
$(obj)/zImage: IMAGE_OFFSET := 0x1000
$(obj)/zImage: asflags-y := $(SVGA_MODE) $(RAMDISK)
$(obj)/bzImage: IMAGE_OFFSET := 0x100000
$(obj)/bzImage: ccflags-y := -D__BIG_KERNEL__
$(obj)/bzImage: asflags-y := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__
$(obj)/bzImage: BUILDFLAGS := -b
quiet_cmd_image = BUILD $@
cmd_image = $(obj)/tools/build $(BUILDFLAGS) $(obj)/setup.bin \
$(obj)/vmlinux.bin $(ROOT_DEV) > $@
$(obj)/zImage $(obj)/bzImage: $(obj)/setup.bin \
$(obj)/vmlinux.bin $(obj)/tools/build FORCE
$(call if_changed,image)
@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S
$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
$(call if_changed,objcopy)
SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
LDFLAGS_setup.elf := -T
$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
$(call if_changed,ld)
OBJCOPYFLAGS_setup.bin := -O binary
$(obj)/setup.bin: $(obj)/setup.elf FORCE
$(call if_changed,objcopy)
$(obj)/compressed/vmlinux: FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed IMAGE_OFFSET=$(IMAGE_OFFSET) $@
# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel
FDARGS =
# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel
FDINITRD =
image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,)
$(obj)/mtools.conf: $(src)/mtools.conf.in
sed -e 's|@OBJ@|$(obj)|g' < $< > $@
# This requires write access to /dev/fd0
zdisk: $(BOOTIMAGE) $(obj)/mtools.conf
MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync
syslinux /dev/fd0 ; sync
echo '$(image_cmdline)' | \
MTOOLSRC=$(src)/mtools.conf mcopy - a:syslinux.cfg
if [ -f '$(FDINITRD)' ] ; then \
MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \
fi
MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync
# These require being root or having syslinux 2.02 or higher installed
fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf
dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440
MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync
syslinux $(obj)/fdimage ; sync
echo '$(image_cmdline)' | \
MTOOLSRC=$(obj)/mtools.conf mcopy - v:syslinux.cfg
if [ -f '$(FDINITRD)' ] ; then \
MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \
fi
MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync
fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf
dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880
MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync
syslinux $(obj)/fdimage ; sync
echo '$(image_cmdline)' | \
MTOOLSRC=$(obj)/mtools.conf mcopy - w:syslinux.cfg
if [ -f '$(FDINITRD)' ] ; then \
MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \
fi
MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync
isoimage: $(BOOTIMAGE)
-rm -rf $(obj)/isoimage
mkdir $(obj)/isoimage
for i in lib lib64 share end ; do \
if [ -f /usr/$$i/syslinux/isolinux.bin ] ; then \
cp /usr/$$i/syslinux/isolinux.bin $(obj)/isoimage ; \
break ; \
fi ; \
if [ $$i = end ] ; then exit 1 ; fi ; \
done
cp $(BOOTIMAGE) $(obj)/isoimage/linux
echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg
if [ -f '$(FDINITRD)' ] ; then \
cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \
fi
mkisofs -J -r -o $(obj)/image.iso -b isolinux.bin -c boot.cat \
-no-emul-boot -boot-load-size 4 -boot-info-table \
$(obj)/isoimage
rm -rf $(obj)/isoimage
zlilo: $(BOOTIMAGE)
if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz
cp System.map $(INSTALL_PATH)/
if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
install:
sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
