#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <asm/oplib.h>
#include <asm/prom.h>
#include <asm/irq.h>
#include <asm/upa.h>
#include "prom.h"
#ifdef CONFIG_PCI
/* PSYCHO interrupt mapping support. */
#define PSYCHO_IMAP_A_SLOT0 0x0c00UL
#define PSYCHO_IMAP_B_SLOT0 0x0c20UL
static unsigned long psycho_pcislot_imap_offset(unsigned long ino)
{
unsigned int bus = (ino & 0x10) >> 4;
unsigned int slot = (ino & 0x0c) >> 2;
if (bus == 0)
return PSYCHO_IMAP_A_SLOT0 + (slot * 8);
else
return PSYCHO_IMAP_B_SLOT0 + (slot * 8);
}
#define PSYCHO_OBIO_IMAP_BASE 0x1000UL
#define PSYCHO_ONBOARD_IRQ_BASE 0x20
#define psycho_onboard_imap_offset(__ino) \
(PSYCHO_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
#define PSYCHO_ICLR_A_SLOT0 0x1400UL
#define PSYCHO_ICLR_SCSI 0x1800UL
#define psycho_iclr_offset(ino) \
((ino & 0x20) ? (PSYCHO_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \
(PSYCHO_ICLR_A_SLOT0 + (((ino) & 0x1f)<<3)))
static unsigned int psycho_irq_build(struct device_node *dp,
unsigned int ino,
void *_data)
{
unsigned long controller_regs = (unsigned long) _data;
unsigned long imap, iclr;
unsigned long imap_off, iclr_off;
int inofixup = 0;
ino &= 0x3f;
if (ino < PSYCHO_ONBOARD_IRQ_BASE) {
/* PCI slot */
imap_off = psycho_pcislot_imap_offset(ino);
} else {
/* Onboard device */
imap_off = psycho_onboard_imap_offset(ino);
}
/* Now build the IRQ bucket. */
imap = controller_regs + imap_off;
iclr_off = psycho_iclr_offset(ino);
iclr = controller_regs + iclr_off;
if ((ino & 0x20) == 0)
inofixup = ino & 0x03;
return build_irq(inofixup, iclr, imap);
}
static void __init psycho_irq_trans_init(struct device_node *dp)
{
const struct linux_prom64_registers *regs;
dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
dp->irq_trans->irq_build = psycho_irq_build;
regs = of_get_property(dp, "reg", NULL);
dp->irq_trans->data = (void *) regs[2].phys_addr;
}
#define sabre_read(__reg) \
({ u64 __ret; \
__asm__ __volatile__("ldxa [%1] %2, %0" \
: "=r" (__ret) \
: "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \
: "memory"); \
__ret; \
})
struct sabre_irq_data {
unsigned long controller_regs;
unsigned int pci_first_busno;
};
#define SABRE_CONFIGSPACE 0x001000000UL
#define SABRE_WRSYNC 0x1c20UL
#define SABRE_CONFIG_BASE(CONFIG_SPACE) \
(CONFIG_SPACE | (1UL << 24))
#define SABRE_CONFIG_ENCODE(BUS, DEVFN, REG) \
(((unsigned long)(BUS) << 16) | \
((unsigned long)(DEVFN) << 8) | \
((unsigned long)(REG)))
/* When a device lives behind a bridge deeper in the PCI bus topology
* than APB, a special sequence must run to make sure all pending DMA
* transfers at the time of IRQ delivery are visible in the coherency
* domain by the cpu. This sequence is to perform a read on the far
* side of the non-APB bridge, then perform a read of Sabre's DMA
* write-sync register.
*/
static void sabre_wsync_handler(unsigned int ino, void *_arg1, void *_arg2)
{
unsigned int phys_hi = (unsigned int) (unsigned long) _arg1;
struct sabre_irq_data *irq_data = _arg2;
unsigned long controller_regs = irq_data->controller_regs;
unsigned long sync_reg = controller_regs + SABRE_WRSYNC;
unsigned long config_space = controller_regs + SABRE_CONFIGSPACE;
unsigned int bus, devfn;
u16 _unused;
config_space = SABRE_CONFIG_BASE(config_space);
bus = (phys_hi >> 16) & 0xff;
devfn = (phys_hi >> 8) & 0xff;
config_space |= SABRE_CONFIG_ENCODE(bus, devfn, 0x00);
__asm__ __volatile__("membar #Sync\n\t"
"lduha [%1] %2, %0\n\t"
"membar #Sync"
: "=r" (_unused)
: "r" ((u16 *) config_space),
"i" (ASI_PHYS_BYPASS_EC_E_L)
: "memory");
sabre_read(sync_reg);
}
#define SABRE_IMAP_A_SLOT0 0x0c00UL
#define SABRE_IMAP_B_SLOT0 0x0c20UL
#define SABRE_ICLR_A_SLOT0 0x1400UL
#define SABRE_ICLR_B_SLOT0 0x1480UL
#define SABRE_ICLR_SCSI 0x1800UL
#define SABRE_ICLR_ETH 0x1808UL
#define SABRE_ICLR_BPP 0x1810UL
#define SABRE_ICLR_AU_REC 0x1818UL
#define SABRE_ICLR_AU_PLAY 0x1820UL
#define SABRE_ICLR_PFAIL 0x1828UL
#define SABRE_ICLR_KMS 0x1830UL
#define SABRE_ICLR_FLPY 0x1838UL
#define SABRE_ICLR_SHW 0x1840UL
#define SABRE_ICLR_KBD 0x1848UL
#define SABRE_ICLR_MS 0x1850UL
#define SABRE_ICLR_SER 0x1858UL
#define SABRE_ICLR_UE 0x1870UL
#define SABRE_ICLR_CE 0x1878UL
#define SABRE_ICLR_PCIERR 0x1880UL
static unsigned long sabre_pcislot_imap_offset(unsigned long ino)
{
unsigned int bus = (ino & 0x10) >> 4;
unsigned int slot = (ino & 0x0c) >> 2;
if (bus == 0)
return SABRE_IMAP_A_SLOT0 + (slot * 8);
else
return SABRE_IMAP_B_SLOT0 + (slot * 8);
}
#define SABRE_OBIO_IMAP_BASE 0x1000UL
#define SABRE_ONBOARD_IRQ_BASE 0x20
#define sabre_onboard_imap_offset(__ino) \
(SABRE_OBIO_IMAP_BASE + (((__ino) & 0x1f) << 3))
#define sabre_iclr_offset(ino) \
((ino & 0x20) ? (SABRE_ICLR_SCSI + (((ino) & 0x1f) << 3)) : \
(SABRE_ICLR_A_SLOT0 + (((ino) & 0x1f)<<3)))
static int sabre_device_needs_wsync(struct device_node *dp)
{
struct device_node *parent = dp->parent;
const char *parent_model, *parent_compat;
/* This traversal up towards the root is meant to
* handle two cases:
*
* 1) non-PCI bus sitting under PCI, such as 'ebus'
* 2) the PCI controller interrupts themselves, which
* will use the sabre_irq_build but do not need
* the DMA synchronization handling
*/
while (parent) {
if (!strcmp(parent->type, "pci"))
break;
parent = parent->parent;
}
if (!parent)
return 0;
parent_model = of_get_property(parent,
"model", NULL);
if (parent_model &&
(!strcmp(parent_model, "SUNW,sabre") ||
!strcmp(parent_model, "SUNW,simba")))
return 0;
parent_compat = of_get_property(parent,
"compatible", NULL);
if (parent_compat &&
(!strcmp(parent_compat, "pci108e,a000") ||
!strcmp(parent_compat, "pci108e,a001")))
return 0;
return 1;
}
static unsigned int sabre_irq_build(struct device_node *dp,
unsigned int ino,
void *_data)
{
struct sabre_irq_data *irq_data = _data;
unsigned long controller_regs = irq_data->controller_regs;
const struct linux_prom_pci_registers *regs;
unsigned long imap, iclr;
unsigned long imap_off, iclr_off;
int inofixup = 0;
int virt_irq;
ino &= 0x3f;
if (ino < SABRE_ONBOARD_IRQ_BASE) {
/* PCI slot */
imap_off = sabre_pcislot_imap_offset(ino);
} else {
/* onboard device */
imap_off = sabre_onboard_imap_offset(ino);
}
/* Now build the IRQ bucket. */
imap = controller_regs + imap_off;
iclr_off = sabre_iclr_offset(ino);
iclr = controller_regs + iclr_off;
if ((ino & 0x20) == 0)
inofixup = ino & 0x03;
virt_irq = build_irq(inofixup, iclr, imap);
/* If the parent device is a PCI<->PCI bridge other than
* APB, we have to install a pre-handler to ensure that
* all pending DMA is drained before the interrupt handler
* is run.
*/
regs = of_get_property(dp, "reg", NULL);
if (regs && sabre_device_needs_wsync(dp)) {
irq_install_pre_handler(virt_irq,
sabre_wsync_handler,
(void *) (long) regs->phys_hi,
(void *) irq_data);
}
return virt_irq;
}
static void __init sabre_irq_trans_init(struct device_node *dp)
{
const struct linux_prom64_registers *regs;
struct sabre_irq_data *irq_data;
const u32 *busrange;
dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
dp->irq_trans->irq_build = sabre_irq_build;
irq_data = prom_early_alloc(sizeof(struct sabre_irq_data));
regs = of_get_property(dp, "reg", NULL);
irq_data->controller_regs = regs[0].phys_addr;
busrange = of_get_property(dp, "bus-range", NULL);
irq_data->pci_first_busno = busrange[0];
dp->irq_trans->data = irq_data;
}
/* SCHIZO interrupt mapping support. Unlike Psycho, for this controller the
* imap/iclr registers are per-PBM.
*/
#define SCHIZO_IMAP_BASE 0x1000UL
#define SCHIZO_ICLR_BASE 0x1400UL
static unsigned long schizo_imap_offset(unsigned long ino)
{
return SCHIZO_IMAP_BASE + (ino * 8UL);
}
static unsigned long schizo_iclr_offset(unsigned long ino)
{
return SCHIZO_ICLR_BASE + (ino * 8UL);
}
static unsigned long schizo_ino_to_iclr(unsigned long pbm_regs,
unsigned int ino)
{
return pbm_regs + schizo_iclr_offset(ino);
}
static unsigned long schizo_ino_to_imap(unsigned long pbm_regs,
unsigned int ino)
{
return pbm_regs + schizo_imap_offset(ino);
}
#define schizo_read(__reg) \
({ u64 __ret; \
__asm__ __volatile__("ldxa [%1] %2, %0" \
: "=r" (__ret) \
: "r" (__reg), "i" (ASI_PHYS_BYPASS_EC_E) \
: "memory"); \
__ret; \
})
#define schizo_write(__reg, __val) \
__asm__ __volatile__("stxa %0, [%1] %2" \
: /* no outputs */ \
: "r" (__val), "r" (__reg), \
"i" (ASI_PHYS_BYPASS_EC_E) \
: "memory")
static void tomatillo_wsync_handler(unsigned int ino, void *_arg1, void *_arg2)
{
unsigned long sync_reg = (unsigned long) _arg2;
u64 mask = 1UL << (ino & IMAP_INO);
u64 val;
int limit;
schizo_write(sync_reg, mask);
limit = 100000;
val = 0;
while (--limit) {
val = schizo_read(sync_reg);
if (!(val & mask))
break;
}
if (limit <= 0) {
printk("tomatillo_wsync_handler: DMA won't sync [%lx:%lx]\n",
val, mask);
}
if (_arg1) {
static unsigned char cacheline[64]
__attribute__ ((aligned (64)));
__asm__ __volatile__("rd %%fprs, %0\n\t"
"or %0, %4, %1\n\t"
"wr %1, 0x0, %%fprs\n\t"
"stda %%f0, [%5] %6\n\t"
"wr %0, 0x0, %%fprs\n\t"
"membar #Sync"
: "=&r" (mask), "=&r" (val)
: "0" (mask), "1" (val),
"i" (FPRS_FEF), "r" (&cacheline[0]),
"i" (ASI_BLK_COMMIT_P));
}
}
struct schizo_irq_data {
unsigned long pbm_regs;
unsigned long sync_reg;
u32 portid;
int chip_version;
};
static unsigned int schizo_irq_build(struct device_node *dp,
unsigned int ino,
void *_data)
{
struct schizo_irq_data *irq_data = _data;
unsigned long pbm_regs = irq_data->pbm_regs;
unsigned long imap, iclr;
int ign_fixup;
int virt_irq;
int is_tomatillo;
ino &= 0x3f;
/* Now build the IRQ bucket. */
imap = schizo_ino_to_imap(pbm_regs, ino);
iclr = schizo_ino_to_iclr(pbm_regs, ino);
/* On Schizo, no inofixup occurs. This is because each
* INO has it's own IMAP register. On Psycho and Sabre
* there is only one IMAP register for each PCI slot even
* though four different INOs can be generated by each
* PCI slot.
*
* But, for JBUS variants (essentially, Tomatillo), we have
* to fixup the lowest bit of the interrupt group number.
*/
ign_fixup = 0;
is_tomatillo = (irq_data->sync_reg != 0UL);
if (is_tomatillo) {
if (irq_data->portid & 1)
ign_fixup = (1 << 6);
}
virt_irq = build_irq(ign_fixup, iclr, imap);
if (is_tomatillo) {
irq_install_pre_handler(virt_irq,
tomatillo_wsync_handler,
((irq_data->chip_version <= 4) ?
(void *) 1 : (void *) 0),
(void *) irq_data->sync_reg);
}
return virt_irq;
}
static void __init __schizo_irq_trans_init(struct device_node *dp,
int is_tomatillo)
{
const struct linux_prom64_registers *regs;
struct schizo_irq_data *irq_data;
dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
dp->irq_trans->irq_build = schizo_irq_build;
irq_data = prom_early_alloc(sizeof(struct schizo_irq_data));
regs = of_get_property(dp, "reg", NULL);
dp->irq_trans->data = irq_data;
irq_data->pbm_regs = regs[0].phys_addr;
if (is_tomatillo)
irq_data->sync_reg = regs[3].phys_addr + 0x1a18UL;
else
irq_data->sync_reg = 0UL;
irq_data->portid = of_getintprop_default(dp, "portid", 0);
irq_data->chip_version = of_getintprop_default(dp, "version#", 0);
}
static void __init schizo_irq_trans_init(struct device_node *dp)
{
__schizo_irq_trans_init(dp, 0);
}
static void __init tomatillo_irq_trans_init(struct device_node *dp)
{
__schizo_irq_trans_init(dp, 1);
}
static unsigned int pci_sun4v_irq_build(struct device_node *dp,
unsigned int devino,
void *_data)
{
u32 devhandle = (u32) (unsigned long) _data;
return sun4v_build_irq(devhandle, devino);
}
static void __init pci_sun4v_irq_trans_init(struct device_node *dp)
{
const struct linux_prom64_registers *regs;
dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
dp->irq_trans->irq_build = pci_sun4v_irq_build;
regs = of_get_property(dp, "reg", NULL);
dp->irq_trans->data = (void *) (unsigned long)
((regs->phys_addr >> 32UL) & 0x0fffffff);
}
struct fire_irq_data {
unsigned long pbm_regs;
u32 portid;
};
#define FIRE_IMAP_BASE 0x001000
#define FIRE_ICLR_BASE 0x001400
static unsigned long fire_imap_offset(unsigned long ino)
{
return FIRE_IMAP_BASE + (ino * 8UL);
}
static unsigned long fire_iclr_offset(unsigned long ino)
{
return FIRE_ICLR_BASE + (ino * 8UL);
}
static unsigned long fire_ino_to_iclr(unsigned long pbm_regs,
unsigned int ino)
{
return pbm_regs + fire_iclr_offset(ino);
}
static unsigned long fire_ino_to_imap(unsigned long pbm_regs,
unsigned int ino)
{
return pbm_regs + fire_imap_offset(ino);
}
static unsigned int fire_irq_build(struct device_node *dp,
unsigned int ino,
void *_data)
{
struct fire_irq_data *irq_data = _data;
unsigned long pbm_regs = irq_data->pbm_regs;
unsigned long imap, iclr;
unsigned long int_ctrlr;
ino &= 0x3f;
/* Now build the IRQ bucket. */
imap = fire_ino_to_imap(pbm_regs, ino);
iclr = fire_ino_to_iclr(pbm_regs, ino);
/* Set the interrupt controller number. */
int_ctrlr = 1 << 6;
upa_writeq(int_ctrlr, imap);
/* The interrupt map registers do not have an INO field
* like other chips do. They return zero in the INO
* field, and the interrupt controller number is controlled
* in bits 6 to 9. So in order for build_irq() to get
* the INO right we pass it in as part of the fixup
* which will get added to the map register zero value
* read by build_irq().
*/
ino |= (irq_data->portid << 6);
ino -= int_ctrlr;
return build_irq(ino, iclr, imap);
}
static void __init fire_irq_trans_init(struct device_node *dp)
{
const struct linux_prom64_registers *regs;
struct fire_irq_data *irq_data;
dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
dp->irq_trans->irq_build = fire_irq_build;
irq_data = prom_early_alloc(sizeof(struct fire_irq_data));
regs = of_get_property(dp, "reg", NULL);
dp->irq_trans->data = irq_data;
irq_data->pbm_regs = regs[0].phys_addr;
irq_data->portid = of_getintprop_default(dp, "portid", 0);
}
#endif /* CONFIG_PCI */
#ifdef CONFIG_SBUS
/* INO number to IMAP register offset for SYSIO external IRQ's.
* This should conform to both Sunfire/Wildfire server and Fusion
* desktop designs.
*/
#define SYSIO_IMAP_SLOT0 0x2c00UL
#define SYSIO_IMAP_SLOT1 0x2c08UL
#define SYSIO_IMAP_SLOT2 0x2c10UL
#define SYSIO_IMAP_SLOT3 0x2c18UL
#define SYSIO_IMAP_SCSI 0x3000UL
#define SYSIO_IMAP_ETH 0x3008UL
#define SYSIO_IMAP_BPP 0x3010UL
#define SYSIO_IMAP_AUDIO 0x3018UL
#define SYSIO_IMAP_PFAIL 0x3020UL
#define SYSIO_IMAP_KMS 0x3028UL
#define SYSIO_IMAP_FLPY 0x3030UL
#define SYSIO_IMAP_SHW 0x3038UL
#define SYSIO_IMAP_KBD 0x3040UL
#define SYSIO_IMAP_MS 0x3048UL
#define SYSIO_IMAP_SER 0x3050UL
#define SYSIO_IMAP_TIM0 0x3060UL
#define SYSIO_IMAP_TIM1 0x3068UL
#define SYSIO_IMAP_UE 0x3070UL
#define SYSIO_IMAP_CE 0x3078UL
#define SYSIO_IMAP_SBERR 0x3080UL
#define SYSIO_IMAP_PMGMT 0x3088UL
#define SYSIO_IMAP_GFX 0x3090UL
#define SYSIO_IMAP_EUPA 0x3098UL
#define bogon ((unsigned long) -1)
static unsigned long sysio_irq_offsets[] = {
/* SBUS Slot 0 --> 3, level 1 --> 7 */
SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0,
SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0, SYSIO_IMAP_SLOT0,
SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1,
SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1, SYSIO_IMAP_SLOT1,
SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2,
SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2, SYSIO_IMAP_SLOT2,
SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3,
SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3, SYSIO_IMAP_SLOT3,
/* Onboard devices (not relevant/used on SunFire). */
SYSIO_IMAP_SCSI,
SYSIO_IMAP_ETH,
SYSIO_IMAP_BPP,
bogon,
SYSIO_IMAP_AUDIO,
SYSIO_IMAP_PFAIL,
bogon,
bogon,
SYSIO_IMAP_KMS,
SYSIO_IMAP_FLPY,
SYSIO_IMAP_SHW,
SYSIO_IMAP_KBD,
SYSIO_IMAP_MS,
SYSIO_IMAP_SER,
bogon,
bogon,
SYSIO_IMAP_TIM0,
SYSIO_IMAP_TIM1,
bogon,
bogon,
SYSIO_IMAP_UE,
SYSIO_IMAP_CE,
SYSIO_IMAP_SBERR,
SYSIO_IMAP_PMGMT,
SYSIO_IMAP_GFX,
SYSIO_IMAP_EUPA,
};
#undef bogon
#define NUM_SYSIO_OFFSETS ARRAY_SIZE(sysio_irq_offsets)
/* Convert Interrupt Mapping register pointer to associated
* Interrupt Clear register pointer, SYSIO specific version.
*/
#define SYSIO_ICLR_UNUSED0 0x3400UL
#define SYSIO_ICLR_SLOT0 0x3408UL
#define SYSIO_ICLR_SLOT1 0x3448UL
#define SYSIO_ICLR_SLOT2 0x3488UL
#define SYSIO_ICLR_SLOT3 0x34c8UL
static unsigned long sysio_imap_to_iclr(unsigned long imap)
{
unsigned long diff = SYSIO_ICLR_UNUSED0 - SYSIO_IMAP_SLOT0;
return imap + diff;
}
static unsigned int sbus_of_build_irq(struct device_node *dp,
unsigned int ino,
void *_data)
{
unsigned long reg_base = (unsigned long) _data;
const struct linux_prom_registers *regs;
unsigned long imap, iclr;
int sbus_slot = 0;
int sbus_level = 0;
ino &= 0x3f;
regs = of_get_property(dp, "reg", NULL);
if (regs)
sbus_slot = regs->which_io;
if (ino < 0x20)
ino += (sbus_slot * 8);
imap = sysio_irq_offsets[ino];
if (imap == ((unsigned long)-1)) {
prom_printf("get_irq_translations: Bad SYSIO INO[%x]\n",
ino);
prom_halt();
}
imap += reg_base;
/* SYSIO inconsistency. For external SLOTS, we have to select
* the right ICLR register based upon the lower SBUS irq level
* bits.
*/
if (ino >= 0x20) {
iclr = sysio_imap_to_iclr(imap);
} else {
sbus_level = ino & 0x7;
switch(sbus_slot) {
case 0:
iclr = reg_base + SYSIO_ICLR_SLOT0;
break;
case 1:
iclr = reg_base + SYSIO_ICLR_SLOT1;
break;
case 2:
iclr = reg_base + SYSIO_ICLR_SLOT2;
break;
default:
case 3:
iclr = reg_base + SYSIO_ICLR_SLOT3;
break;
};
iclr += ((unsigned long)sbus_level - 1UL) * 8UL;
}
return build_irq(sbus_level, iclr, imap);
}
static void __init sbus_irq_trans_init(struct device_node *dp)
{
const struct linux_prom64_registers *regs;
dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
dp->irq_trans->irq_build = sbus_of_build_irq;
regs = of_get_property(dp, "reg", NULL);
dp->irq_trans->data = (void *) (unsigned long) regs->phys_addr;
}
#endif /* CONFIG_SBUS */
static unsigned int central_build_irq(struct device_node *dp,
unsigned int ino,
void *_data)
{
struct device_node *central_dp = _data;
struct of_device *central_op = of_find_device_by_node(central_dp);
struct resource *res;
unsigned long imap, iclr;
u32 tmp;
if (!strcmp(dp->name, "eeprom")) {
res = ¢ral_op->resource[5];
} else if (!strcmp(dp->name, "zs")) {
res = ¢ral_op->resource[4];
} else if (!strcmp(dp->name, "clock-board")) {
res = ¢ral_op->resource[3];
} else {
return ino;
}
imap = res->start + 0x00UL;
iclr = res->start + 0x10UL;
/* Set the INO state to idle, and disable. */
upa_writel(0, iclr);
upa_readl(iclr);
tmp = upa_readl(imap);
tmp &= ~0x80000000;
upa_writel(tmp, imap);
return build_irq(0, iclr, imap);
}
static void __init central_irq_trans_init(struct device_node *dp)
{
dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
dp->irq_trans->irq_build = central_build_irq;
dp->irq_trans->data = dp;
}
struct irq_trans {
const char *name;
void (*init)(struct device_node *);
};
#ifdef CONFIG_PCI
static struct irq_trans __initdata pci_irq_trans_table[] = {
{ "SUNW,sabre", sabre_irq_trans_init },
{ "pci108e,a000", sabre_irq_trans_init },
{ "pci108e,a001", sabre_irq_trans_init },
{ "SUNW,psycho", psycho_irq_trans_init },
{ "pci108e,8000", psycho_irq_trans_init },
{ "SUNW,schizo", schizo_irq_trans_init },
{ "pci108e,8001", schizo_irq_trans_init },
{ "SUNW,schizo+", schizo_irq_trans_init },
{ "pci108e,8002", schizo_irq_trans_init },
{ "SUNW,tomatillo", tomatillo_irq_trans_init },
{ "pci108e,a801", tomatillo_irq_trans_init },
{ "SUNW,sun4v-pci", pci_sun4v_irq_trans_init },
{ "pciex108e,80f0", fire_irq_trans_init },
};
#endif
static unsigned int sun4v_vdev_irq_build(struct device_node *dp,
unsigned int devino,
void *_data)
{
u32 devhandle = (u32) (unsigned long) _data;
return sun4v_build_irq(devhandle, devino);
}
static void __init sun4v_vdev_irq_trans_init(struct device_node *dp)
{
const struct linux_prom64_registers *regs;
dp->irq_trans = prom_early_alloc(sizeof(struct of_irq_controller));
dp->irq_trans->irq_build = sun4v_vdev_irq_build;
regs = of_get_property(dp, "reg", NULL);
dp->irq_trans->data = (void *) (unsigned long)
((regs->phys_addr >> 32UL) & 0x0fffffff);
}
void __init irq_trans_init(struct device_node *dp)
{
#ifdef CONFIG_PCI
const char *model;
int i;
#endif
#ifdef CONFIG_PCI
model = of_get_property(dp, "model", NULL);
if (!model)
model = of_get_property(dp, "compatible", NULL);
if (model) {
for (i = 0; i < ARRAY_SIZE(pci_irq_trans_table); i++) {
struct irq_trans *t = &pci_irq_trans_table[i];
if (!strcmp(model, t->name)) {
t->init(dp);
return;
}
}
}
#endif
#ifdef CONFIG_SBUS
if (!strcmp(dp->name, "sbus") ||
!strcmp(dp->name, "sbi")) {
sbus_irq_trans_init(dp);
return;
}
#endif
if (!strcmp(dp->name, "fhc") &&
!strcmp(dp->parent->name, "central")) {
central_irq_trans_init(dp);
return;
}
if (!strcmp(dp->name, "virtual-devices") ||
!strcmp(dp->name, "niu")) {
sun4v_vdev_irq_trans_init(dp);
return;
}
}
