/*
* arch/sh/drivers/pci/ops-dreamcast.c
*
* PCI operations for the Sega Dreamcast
*
* Copyright (C) 2001, 2002 M. R. Brown
* Copyright (C) 2002, 2003 Paul Mundt
*
* This file originally bore the message (with enclosed-$):
* Id: pci.c,v 1.3 2003/05/04 19:29:46 lethal Exp
* Dreamcast PCI: Supports SEGA Broadband Adaptor only.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/pci.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach/pci.h>
static struct resource gapspci_io_resource = {
.name = "GAPSPCI IO",
.start = GAPSPCI_BBA_CONFIG,
.end = GAPSPCI_BBA_CONFIG + GAPSPCI_BBA_CONFIG_SIZE - 1,
.flags = IORESOURCE_IO,
};
static struct resource gapspci_mem_resource = {
.name = "GAPSPCI mem",
.start = GAPSPCI_DMA_BASE,
.end = GAPSPCI_DMA_BASE + GAPSPCI_DMA_SIZE - 1,
.flags = IORESOURCE_MEM,
};
static struct pci_ops gapspci_pci_ops;
struct pci_channel board_pci_channels[] = {
{ &gapspci_pci_ops, &gapspci_io_resource,
&gapspci_mem_resource, 0, 1 },
{ 0, }
};
/*
* The !gapspci_config_access case really shouldn't happen, ever, unless
* someone implicitly messes around with the last devfn value.. otherwise we
* only support a single device anyways, and if we didn't have a BBA, we
* wouldn't make it terribly far through the PCI setup anyways.
*
* Also, we could very easily support both Type 0 and Type 1 configurations
* here, but since it doesn't seem that there is any such implementation in
* existance, we don't bother.
*
* I suppose if someone actually gets around to ripping the chip out of
* the BBA and hanging some more devices off of it, then this might be
* something to take into consideration. However, due to the cost of the BBA,
* and the general lack of activity by DC hardware hackers, this doesn't seem
* likely to happen anytime soon.
*/
static int gapspci_config_access(unsigned char bus, unsigned int devfn)
{
return (bus == 0) && (devfn == 0);
}
/*
* We can also actually read and write in b/w/l sizes! Thankfully this part
* was at least done right, and we don't have to do the stupid masking and
* shifting that we do on the 7751! Small wonders never cease to amaze.
*/
static int gapspci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val)
{
*val = 0xffffffff;
if (!gapspci_config_access(bus->number, devfn))
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
case 1: *val = inb(GAPSPCI_BBA_CONFIG+where); break;
case 2: *val = inw(GAPSPCI_BBA_CONFIG+where); break;
case 4: *val = inl(GAPSPCI_BBA_CONFIG+where); break;
}
return PCIBIOS_SUCCESSFUL;
}
static int gapspci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val)
{
if (!gapspci_config_access(bus->number, devfn))
return PCIBIOS_DEVICE_NOT_FOUND;
switch (size) {
case 1: outb(( u8)val, GAPSPCI_BBA_CONFIG+where); break;
case 2: outw((u16)val, GAPSPCI_BBA_CONFIG+where); break;
case 4: outl((u32)val, GAPSPCI_BBA_CONFIG+where); break;
}
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops gapspci_pci_ops = {
.read = gapspci_read,
.write = gapspci_write,
};
/*
* gapspci init
*/
int __init gapspci_init(void)
{
char idbuf[16];
int i;
/*
* FIXME: All of this wants documenting to some degree,
* even some basic register definitions would be nice.
*
* I haven't seen anything this ugly since.. maple.
*/
for (i=0; i<16; i++)
idbuf[i] = inb(GAPSPCI_REGS+i);
if (strncmp(idbuf, "GAPSPCI_BRIDGE_2", 16))
return -ENODEV;
outl(0x5a14a501, GAPSPCI_REGS+0x18);
for (i=0; i<1000000; i++)
;
if (inl(GAPSPCI_REGS+0x18) != 1)
return -EINVAL;
outl(0x01000000, GAPSPCI_REGS+0x20);
outl(0x01000000, GAPSPCI_REGS+0x24);
outl(GAPSPCI_DMA_BASE, GAPSPCI_REGS+0x28);
outl(GAPSPCI_DMA_BASE+GAPSPCI_DMA_SIZE, GAPSPCI_REGS+0x2c);
outl(1, GAPSPCI_REGS+0x14);
outl(1, GAPSPCI_REGS+0x34);
/* Setting Broadband Adapter */
outw(0xf900, GAPSPCI_BBA_CONFIG+0x06);
outl(0x00000000, GAPSPCI_BBA_CONFIG+0x30);
outb(0x00, GAPSPCI_BBA_CONFIG+0x3c);
outb(0xf0, GAPSPCI_BBA_CONFIG+0x0d);
outw(0x0006, GAPSPCI_BBA_CONFIG+0x04);
outl(0x00002001, GAPSPCI_BBA_CONFIG+0x10);
outl(0x01000000, GAPSPCI_BBA_CONFIG+0x14);
return 0;
}
/* Haven't done anything here as yet */
char * __devinit pcibios_setup(char *str)
{
return str;
}
