/*
* arch/ppc/boot/common/util.S
*
* Useful bootup functions, which are more easily done in asm than C.
*
* NOTE: Be very very careful about the registers you use here.
* We don't follow any ABI calling convention among the
* assembler functions that call each other, especially early
* in the initialization. Please preserve at least r3 and r4
* for these early functions, as they often contain information
* passed from boot roms into the C decompress function.
*
* Author: Tom Rini
* trini@mvista.com
* Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others).
*
* 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <asm/processor.h>
#include <asm/cache.h>
#include <asm/ppc_asm.h>
.text
#ifdef CONFIG_6xx
.globl disable_6xx_mmu
disable_6xx_mmu:
/* Establish default MSR value, exception prefix 0xFFF.
* If necessary, this function must fix up the LR if we
* return to a different address space once the MMU is
* disabled.
*/
li r8,MSR_IP|MSR_FP
mtmsr r8
isync
/* Test for a 601 */
mfpvr r10
srwi r10,r10,16
cmpwi 0,r10,1 /* 601 ? */
beq .clearbats_601
/* Clear BATs */
li r8,0
mtspr SPRN_DBAT0U,r8
mtspr SPRN_DBAT0L,r8
mtspr SPRN_DBAT1U,r8
mtspr SPRN_DBAT1L,r8
mtspr SPRN_DBAT2U,r8
mtspr SPRN_DBAT2L,r8
mtspr SPRN_DBAT3U,r8
mtspr SPRN_DBAT3L,r8
.clearbats_601:
mtspr SPRN_IBAT0U,r8
mtspr SPRN_IBAT0L,r8
mtspr SPRN_IBAT1U,r8
mtspr SPRN_IBAT1L,r8
mtspr SPRN_IBAT2U,r8
mtspr SPRN_IBAT2L,r8
mtspr SPRN_IBAT3U,r8
mtspr SPRN_IBAT3L,r8
isync
sync
sync
/* Set segment registers */
li r8,16 /* load up segment register values */
mtctr r8 /* for context 0 */
lis r8,0x2000 /* Ku = 1, VSID = 0 */
li r10,0
3: mtsrin r8,r10
addi r8,r8,0x111 /* increment VSID */
addis r10,r10,0x1000 /* address of next segment */
bdnz 3b
blr
.globl disable_6xx_l1cache
disable_6xx_l1cache:
/* Enable, invalidate and then disable the L1 icache/dcache. */
li r8,0
ori r8,r8,(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI)
mfspr r11,SPRN_HID0
or r11,r11,r8
andc r10,r11,r8
isync
mtspr SPRN_HID0,r8
sync
isync
mtspr SPRN_HID0,r10
sync
isync
blr
#endif
.globl _setup_L2CR
_setup_L2CR:
/*
* We should be skipping this section on CPUs where this results in an
* illegal instruction. If not, please send trini@kernel.crashing.org
* the PVR of your CPU.
*/
/* Invalidate/disable L2 cache */
sync
isync
mfspr r8,SPRN_L2CR
rlwinm r8,r8,0,1,31
oris r8,r8,L2CR_L2I@h
sync
isync
mtspr SPRN_L2CR,r8
sync
isync
/* Wait for the invalidation to complete */
mfspr r8,SPRN_PVR
srwi r8,r8,16
cmplwi cr0,r8,0x8000 /* 7450 */
cmplwi cr1,r8,0x8001 /* 7455 */
cmplwi cr2,r8,0x8002 /* 7457 */
cror 4*cr0+eq,4*cr0+eq,4*cr1+eq /* Now test if any are true. */
cror 4*cr0+eq,4*cr0+eq,4*cr2+eq
bne 2f
1: mfspr r8,SPRN_L2CR /* On 745x, poll L2I bit (bit 10) */
rlwinm. r9,r8,0,10,10
bne 1b
b 3f
2: mfspr r8,SPRN_L2CR /* On 75x & 74[01]0, poll L2IP bit (bit 31) */
rlwinm. r9,r8,0,31,31
bne 2b
3: rlwinm r8,r8,0,11,9 /* Turn off L2I bit */
sync
isync
mtspr SPRN_L2CR,r8
sync
isync
blr
.globl _setup_L3CR
_setup_L3CR:
/* Invalidate/disable L3 cache */
sync
isync
mfspr r8,SPRN_L3CR
rlwinm r8,r8,0,1,31
ori r8,r8,L3CR_L3I@l
sync
isync
mtspr SPRN_L3CR,r8
sync
isync
/* Wait for the invalidation to complete */
1: mfspr r8,SPRN_L3CR
rlwinm. r9,r8,0,21,21
bne 1b
rlwinm r8,r8,0,22,20 /* Turn off L3I bit */
sync
isync
mtspr SPRN_L3CR,r8
sync
isync
blr
/* udelay (on non-601 processors) needs to know the period of the
* timebase in nanoseconds. This used to be hardcoded to be 60ns
* (period of 66MHz/4). Now a variable is used that is initialized to
* 60 for backward compatibility, but it can be overridden as necessary
* with code something like this:
* extern unsigned long timebase_period_ns;
* timebase_period_ns = 1000000000 / bd->bi_tbfreq;
*/
.data
.globl timebase_period_ns
timebase_period_ns:
.long 60
.text
/*
* Delay for a number of microseconds
*/
.globl udelay
udelay:
mfspr r4,SPRN_PVR
srwi r4,r4,16
cmpwi 0,r4,1 /* 601 ? */
bne .udelay_not_601
00: li r0,86 /* Instructions / microsecond? */
mtctr r0
10: addi r0,r0,0 /* NOP */
bdnz 10b
subic. r3,r3,1
bne 00b
blr
.udelay_not_601:
mulli r4,r3,1000 /* nanoseconds */
/* Change r4 to be the number of ticks using:
* (nanoseconds + (timebase_period_ns - 1 )) / timebase_period_ns
* timebase_period_ns defaults to 60 (16.6MHz) */
lis r5,timebase_period_ns@ha
lwz r5,timebase_period_ns@l(r5)
add r4,r4,r5
addi r4,r4,-1
divw r4,r4,r5 /* BUS ticks */
1: mftbu r5
mftb r6
mftbu r7
cmpw 0,r5,r7
bne 1b /* Get [synced] base time */
addc r9,r6,r4 /* Compute end time */
addze r8,r5
2: mftbu r5
cmpw 0,r5,r8
blt 2b
bgt 3f
mftb r6
cmpw 0,r6,r9
blt 2b
3: blr
.section ".relocate_code","xa"
/*
* Flush and enable instruction cache
* First, flush the data cache in case it was enabled and may be
* holding instructions for copy back.
*/
_GLOBAL(flush_instruction_cache)
mflr r6
bl flush_data_cache
#ifdef CONFIG_8xx
lis r3, IDC_INVALL@h
mtspr SPRN_IC_CST, r3
lis r3, IDC_ENABLE@h
mtspr SPRN_IC_CST, r3
lis r3, IDC_DISABLE@h
mtspr SPRN_DC_CST, r3
#elif CONFIG_4xx
lis r3,start@h # r9 = &_start
lis r4,_etext@ha
addi r4,r4,_etext@l # r8 = &_etext
1: dcbf r0,r3 # Flush the data cache
icbi r0,r3 # Invalidate the instruction cache
addi r3,r3,0x10 # Increment by one cache line
cmplw cr0,r3,r4 # Are we at the end yet?
blt 1b # No, keep flushing and invalidating
#else
/* Enable, invalidate and then disable the L1 icache/dcache. */
li r3,0
ori r3,r3,(HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI)
mfspr r4,SPRN_HID0
or r5,r4,r3
isync
mtspr SPRN_HID0,r5
sync
isync
ori r5,r4,HID0_ICE /* Enable cache */
mtspr SPRN_HID0,r5
sync
isync
#endif
mtlr r6
blr
#define NUM_CACHE_LINES 128*8
#define cache_flush_buffer 0x1000
/*
* Flush data cache
* Do this by just reading lots of stuff into the cache.
*/
_GLOBAL(flush_data_cache)
lis r3,cache_flush_buffer@h
ori r3,r3,cache_flush_buffer@l
li r4,NUM_CACHE_LINES
mtctr r4
00: lwz r4,0(r3)
addi r3,r3,L1_CACHE_BYTES /* Next line, please */
bdnz 00b
10: blr
.previous
