# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#
mainmenu "Linux/PowerPC Kernel Configuration"
config MMU
bool
default y
config UID16
bool
config GENERIC_HARDIRQS
bool
default y
config RWSEM_GENERIC_SPINLOCK
bool
config RWSEM_XCHGADD_ALGORITHM
bool
default y
config GENERIC_CALIBRATE_DELAY
bool
default y
config HAVE_DEC_LOCK
bool
default y
config PPC
bool
default y
config PPC32
bool
default y
# All PPCs use generic nvram driver through ppc_md
config GENERIC_NVRAM
bool
default y
config SCHED_NO_NO_OMIT_FRAME_POINTER
bool
default y
source "init/Kconfig"
menu "Processor"
choice
prompt "Processor Type"
default 6xx
config 6xx
bool "6xx/7xx/74xx/52xx/82xx/83xx"
select PPC_FPU
help
There are four types of PowerPC chips supported. The more common
types (601, 603, 604, 740, 750, 7400), the Motorola embedded
versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM embedded
versions (403 and 405) and the high end 64 bit Power processors
(POWER 3, POWER4, and IBM 970 also known as G5)
Unless you are building a kernel for one of the embedded processor
systems, 64 bit IBM RS/6000 or an Apple G5, choose 6xx.
Note that the kernel runs in 32-bit mode even on 64-bit chips.
Also note that because the 52xx, 82xx, & 83xx family has a 603e core,
specific support for that chipset is asked later on.
config 40x
bool "40x"
config 44x
bool "44x"
config POWER3
select PPC_FPU
bool "POWER3"
config POWER4
select PPC_FPU
bool "POWER4 and 970 (G5)"
config 8xx
depends on BROKEN
bool "8xx"
config E500
bool "e500"
endchoice
config PPC_FPU
bool
config BOOKE
bool
depends on E500
default y
config FSL_BOOKE
bool
depends on E500
default y
config PTE_64BIT
bool
depends on 44x || E500
default y if 44x
default y if E500 && PHYS_64BIT
config PHYS_64BIT
bool 'Large physical address support' if E500
depends on 44x || E500
default y if 44x
---help---
This option enables kernel support for larger than 32-bit physical
addresses. This features is not be available on all e500 cores.
If in doubt, say N here.
config ALTIVEC
bool "AltiVec Support"
depends on 6xx || POWER4
depends on !8260 && !83xx
---help---
This option enables kernel support for the Altivec extensions to the
PowerPC processor. The kernel currently supports saving and restoring
altivec registers, and turning on the 'altivec enable' bit so user
processes can execute altivec instructions.
This option is only usefully if you have a processor that supports
altivec (G4, otherwise known as 74xx series), but does not have
any affect on a non-altivec cpu (it does, however add code to the
kernel).
If in doubt, say Y here.
config SPE
bool "SPE Support"
depends on E500
---help---
This option enables kernel support for the Signal Processing
Extensions (SPE) to the PowerPC processor. The kernel currently
supports saving and restoring SPE registers, and turning on the
'spe enable' bit so user processes can execute SPE instructions.
This option is only usefully if you have a processor that supports
SPE (e500, otherwise known as 85xx series), but does not have any
affect on a non-spe cpu (it does, however add code to the kernel).
If in doubt, say Y here.
config TAU
bool "Thermal Management Support"
depends on 6xx && !8260 && !83xx
help
G3 and G4 processors have an on-chip temperature sensor called the
'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
temperature within 2-4 degrees Celsius. This option shows the current
on-die temperature in /proc/cpuinfo if the cpu supports it.
Unfortunately, on some chip revisions, this sensor is very inaccurate
and in some cases, does not work at all, so don't assume the cpu
temp is actually what /proc/cpuinfo says it is.
config TAU_INT
bool "Interrupt driven TAU driver (DANGEROUS)"
depends on TAU
---help---
The TAU supports an interrupt driven mode which causes an interrupt
whenever the temperature goes out of range. This is the fastest way
to get notified the temp has exceeded a range. With this option off,
a timer is used to re-check the temperature periodically.
However, on some cpus it appears that the TAU interrupt hardware
is buggy and can cause a situation which would lead unexplained hard
lockups.
Unless you are extending the TAU driver, or enjoy kernel/hardware
debugging, leave this option off.
config TAU_AVERAGE
bool "Average high and low temp"
depends on TAU
---help---
The TAU hardware can compare the temperature to an upper and lower
bound. The default behavior is to show both the upper and lower
bound in /proc/cpuinfo. If the range is large, the temperature is
either changing a lot, or the TAU hardware is broken (likely on some
G4's). If the range is small (around 4 degrees), the temperature is
relatively stable. If you say Y here, a single temperature value,
halfway between the upper and lower bounds, will be reported in
/proc/cpuinfo.
If in doubt, say N here.
config MATH_EMULATION
bool "Math emulation"
depends on 4xx || 8xx || E500
---help---
Some PowerPC chips designed for embedded applications do not have
a floating-point unit and therefore do not implement the
floating-point instructions in the PowerPC instruction set. If you
say Y here, the kernel will include code to emulate a floating-point
unit, which will allow programs that use floating-point
instructions to run.
If you have an Apple machine or an IBM RS/6000 or pSeries machine,
or any machine with a 6xx, 7xx or 7xxx series processor, say N
here. Saying Y here will not hurt performance (on any machine) but
will increase the size of the kernel.
source "drivers/cpufreq/Kconfig"
config CPU_FREQ_PMAC
bool "Support for Apple PowerBooks"
depends on CPU_FREQ && ADB_PMU
select CPU_FREQ_TABLE
help
This adds support for frequency switching on Apple PowerBooks,
this currently includes some models of iBook & Titanium
PowerBook.
config PPC601_SYNC_FIX
bool "Workarounds for PPC601 bugs"
depends on 6xx && (PPC_PREP || PPC_PMAC)
help
Some versions of the PPC601 (the first PowerPC chip) have bugs which
mean that extra synchronization instructions are required near
certain instructions, typically those that make major changes to the
CPU state. These extra instructions reduce performance slightly.
If you say N here, these extra instructions will not be included,
resulting in a kernel which will run faster but may not run at all
on some systems with the PPC601 chip.
If in doubt, say Y here.
source arch/ppc/platforms/4xx/Kconfig
source arch/ppc/platforms/85xx/Kconfig
config PPC64BRIDGE
bool
depends on POWER3 || POWER4
default y
config PPC_STD_MMU
bool
depends on 6xx || POWER3 || POWER4
default y
config NOT_COHERENT_CACHE
bool
depends on 4xx || 8xx
default y
endmenu
menu "Platform options"
choice
prompt "8xx Machine Type"
depends on 8xx
default RPXLITE
config RPXLITE
bool "RPX-Lite"
---help---
Single-board computers based around the PowerPC MPC8xx chips and
intended for embedded applications. The following types are
supported:
RPX-Lite:
Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823.
RPX-Classic:
Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on
the MPC 860
BSE-IP:
Bright Star Engineering ip-Engine.
TQM823L:
TQM850L:
TQM855L:
TQM860L:
MPC8xx based family of mini modules, half credit card size,
up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports,
2 x CAN bus interface, ...
Manufacturer: TQ Components, www.tq-group.de
Date of Release: October (?) 1999
End of Life: not yet :-)
URL:
- module: <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>
- starter kit: <http://www.denx.de/PDF/STK8xxLHWM201.pdf>
- images: <http://www.denx.de/embedded-ppc-en.html>
FPS850L:
FingerPrint Sensor System (based on TQM850L)
Manufacturer: IKENDI AG, <http://www.ikendi.com/>
Date of Release: November 1999
End of life: end 2000 ?
URL: see TQM850L
SPD823TS:
MPC823 based board used in the "Tele Server" product
Manufacturer: Speech Design, <http://www.speech-design.de/>
Date of Release: Mid 2000 (?)
End of life: -
URL: <http://www.speech-design.de/>
select "English", then "Teleteam Solutions", then "TeleServer"
IVMS8:
MPC860 based board used in the "Integrated Voice Mail System",
Small Version (8 voice channels)
Manufacturer: Speech Design, <http://www.speech-design.de/>
Date of Release: December 2000 (?)
End of life: -
URL: <http://www.speech-design.de/>
IVML24:
MPC860 based board used in the "Integrated Voice Mail System",
Large Version (24 voice channels)
Manufacturer: Speech Design, <http://www.speech-design.de/>
Date of Release: March 2001 (?)
End of life: -
URL: <http://www.speech-design.de/>
SM850:
Service Module (based on TQM850L)
Manufacturer: Dependable Computer Systems, <http://www.decomsys.com/>
Date of Release: end 2000 (?)
End of life: mid 2001 (?)
URL: <http://www.tz-mikroelektronik.de/ServiceModule/index.html>
HERMES:
Hermes-Pro ISDN/LAN router with integrated 8 x hub
Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik
<http://www.multidata.de/>
Date of Release: 2000 (?)
End of life: -
URL: <http://www.multidata.de/english/products/hpro.htm>
IP860:
VMEBus IP (Industry Pack) carrier board with MPC860
Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
Date of Release: ?
End of life: -
URL: <http://www.microsys.de/html/ip860.html>
PCU_E:
PCU = Peripheral Controller Unit, Extended
Manufacturer: Siemens AG, ICN (Information and Communication Networks)
<http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html>
Date of Release: April 2001
End of life: August 2001
URL: n. a.
config RPXCLASSIC
bool "RPX-Classic"
help
The RPX-Classic is a single-board computer based on the Motorola
MPC860. It features 16MB of DRAM and a variable amount of flash,
I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two
LEDs. Variants with Ethernet ports exist. Say Y here to support it
directly.
config BSEIP
bool "BSE-IP"
help
Say Y here to support the Bright Star Engineering ipEngine SBC.
This is a credit-card-sized device featuring a MPC823 processor,
26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video
controller, and two RS232 ports.
config FADS
bool "FADS"
config TQM823L
bool "TQM823L"
help
Say Y here to support the TQM823L, one of an MPC8xx-based family of
mini SBCs (half credit-card size) from TQ Components first released
in late 1999. Technical references are at
<http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
<http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
<http://www.denx.de/embedded-ppc-en.html>.
config TQM850L
bool "TQM850L"
help
Say Y here to support the TQM850L, one of an MPC8xx-based family of
mini SBCs (half credit-card size) from TQ Components first released
in late 1999. Technical references are at
<http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
<http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
<http://www.denx.de/embedded-ppc-en.html>.
config TQM855L
bool "TQM855L"
help
Say Y here to support the TQM855L, one of an MPC8xx-based family of
mini SBCs (half credit-card size) from TQ Components first released
in late 1999. Technical references are at
<http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
<http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
<http://www.denx.de/embedded-ppc-en.html>.
config TQM860L
bool "TQM860L"
help
Say Y here to support the TQM860L, one of an MPC8xx-based family of
mini SBCs (half credit-card size) from TQ Components first released
in late 1999. Technical references are at
<http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
<http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
<http://www.denx.de/embedded-ppc-en.html>.
config FPS850L
bool "FPS850L"
config SPD823TS
bool "SPD823TS"
help
Say Y here to support the Speech Design 823 Tele-Server from Speech
Design, released in 2000. The manufacturer's website is at
<http://www.speech-design.de/>.
config IVMS8
bool "IVMS8"
help
Say Y here to support the Integrated Voice-Mail Small 8-channel SBC
from Speech Design, released March 2001. The manufacturer's website
is at <http://www.speech-design.de/>.
config IVML24
bool "IVML24"
help
Say Y here to support the Integrated Voice-Mail Large 24-channel SBC
from Speech Design, released March 2001. The manufacturer's website
is at <http://www.speech-design.de/>.
config SM850
bool "SM850"
help
Say Y here to support the Service Module 850 from Dependable
Computer Systems, an SBC based on the TQM850L module by TQ
Components. This board is no longer in production. The
manufacturer's website is at <http://www.decomsys.com/>.
config HERMES_PRO
bool "HERMES"
config IP860
bool "IP860"
config LWMON
bool "LWMON"
config PCU_E
bool "PCU_E"
config CCM
bool "CCM"
config LANTEC
bool "LANTEC"
config MBX
bool "MBX"
help
MBX is a line of Motorola single-board computer based around the
MPC821 and MPC860 processors, and intended for embedded-controller
applications. Say Y here to support these boards directly.
config WINCEPT
bool "WinCept"
help
The Wincept 100/110 is a Motorola single-board computer based on the
MPC821 PowerPC, introduced in 1998 and designed to be used in
thin-client machines. Say Y to support it directly.
endchoice
choice
prompt "Machine Type"
depends on 6xx || POWER3 || POWER4
default PPC_MULTIPLATFORM
---help---
Linux currently supports several different kinds of PowerPC-based
machines: Apple Power Macintoshes and clones (such as the Motorola
Starmax series), PReP (PowerPC Reference Platform) machines (such
as the Motorola PowerStacks, Motorola cPCI/VME embedded systems,
and some IBM RS/6000 systems), CHRP (Common Hardware Reference
Platform) machines (including all of the recent IBM RS/6000 and
pSeries machines), and several embedded PowerPC systems containing
4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors. Currently, the
default option is to build a kernel which works on the first three.
Select CHRP/PowerMac/PReP if configuring for an IBM RS/6000 or
pSeries machine, a Power Macintosh (including iMacs, iBooks and
Powerbooks), or a PReP machine.
Select Gemini if configuring for a Synergy Microsystems' Gemini
series Single Board Computer. More information is available at:
<http://www.synergymicro.com/PressRel/97_10_15.html>.
Select APUS if configuring for a PowerUP Amiga. More information is
available at: <http://linux-apus.sourceforge.net/>.
config PPC_MULTIPLATFORM
bool "CHRP/PowerMac/PReP"
config APUS
bool "Amiga-APUS"
help
Select APUS if configuring for a PowerUP Amiga.
More information is available at:
<http://linux-apus.sourceforge.net/>.
config KATANA
bool "Artesyn-Katana"
help
Select KATANA if configuring an Artesyn KATANA 750i or 3750
cPCI board.
config WILLOW
bool "Cogent-Willow"
config CPCI690
bool "Force-CPCI690"
help
Select CPCI690 if configuring a Force CPCI690 cPCI board.
config PCORE
bool "Force-PowerCore"
config POWERPMC250
bool "Force-PowerPMC250"
config CHESTNUT
bool "IBM 750FX Eval board or 750GX Eval board"
help
Select CHESTNUT if configuring an IBM 750FX Eval Board or a
IBM 750GX Eval board.
config SPRUCE
bool "IBM-Spruce"
config HDPU
bool "Sky-HDPU"
help
Select HDPU if configuring a Sky Computers Compute Blade.
config HDPU_FEATURES
depends HDPU
tristate "HDPU-Features"
help
Select to enable HDPU enhanced features.
config EV64260
bool "Marvell-EV64260BP"
help
Select EV64260 if configuring a Marvell (formerly Galileo)
EV64260BP Evaluation platform.
config LOPEC
bool "Motorola-LoPEC"
config MCPN765
bool "Motorola-MCPN765"
config MVME5100
bool "Motorola-MVME5100"
config PPLUS
bool "Motorola-PowerPlus"
config PRPMC750
bool "Motorola-PrPMC750"
config PRPMC800
bool "Motorola-PrPMC800"
config SANDPOINT
bool "Motorola-Sandpoint"
help
Select SANDPOINT if configuring for a Motorola Sandpoint X3
(any flavor).
config RADSTONE_PPC7D
bool "Radstone Technology PPC7D board"
config ADIR
bool "SBS-Adirondack"
config K2
bool "SBS-K2"
config PAL4
bool "SBS-Palomar4"
config GEMINI
bool "Synergy-Gemini"
help
Select Gemini if configuring for a Synergy Microsystems' Gemini
series Single Board Computer. More information is available at:
<http://www.synergymicro.com/PressRel/97_10_15.html>.
config EST8260
bool "EST8260"
---help---
The EST8260 is a single-board computer manufactured by Wind River
Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
the MPC8260. Wind River Systems has a website at
<http://www.windriver.com/>, but the EST8260 cannot be found on it
and has probably been discontinued or rebadged.
config SBC82xx
bool "SBC82xx"
---help---
SBC PowerQUICC II, single-board computer with MPC82xx CPU
Manufacturer: Wind River Systems, Inc.
Date of Release: May 2003
End of Life: -
URL: <http://www.windriver.com/>
config SBS8260
bool "SBS8260"
config RPX8260
bool "RPXSUPER"
config TQM8260
bool "TQM8260"
---help---
MPC8260 based module, little larger than credit card,
up to 128 MB global + 64 MB local RAM, 32 MB Flash,
32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
2 x serial ports, ...
Manufacturer: TQ Components, www.tq-group.de
Date of Release: June 2001
End of Life: not yet :-)
URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
config ADS8272
bool "ADS8272"
config PQ2FADS
bool "Freescale-PQ2FADS"
help
Select PQ2FADS if you wish to configure for a Freescale
PQ2FADS board (-VR or -ZU).
config LITE5200
bool "Freescale LITE5200 / (IceCube)"
select PPC_MPC52xx
help
Support for the LITE5200 dev board for the MPC5200 from Freescale.
This is for the LITE5200 version 2.0 board. Don't know if it changes
much but it's only been tested on this board version. I think this
board is also known as IceCube.
config MPC834x_SYS
bool "Freescale MPC834x SYS"
help
This option enables support for the MPC 834x SYS evaluation board.
endchoice
config PQ2ADS
bool
depends on ADS8272
default y
config TQM8xxL
bool
depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L || SM850)
default y
config EMBEDDEDBOOT
bool
depends on 8xx || 8260
default y
config PPC_MPC52xx
bool
config 8260
bool "CPM2 Support" if WILLOW
depends on 6xx
default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
help
The MPC8260 is a typical embedded CPU made by Motorola. Selecting
this option means that you wish to build a kernel for a machine with
an 8260 class CPU.
config 8272
bool
depends on 6xx
default y if ADS8272
select 8260
help
The MPC8272 CPM has a different internal dpram setup than other CPM2
devices
config 83xx
bool
default y if MPC834x_SYS
config MPC834x
bool
default y if MPC834x_SYS
config CPM2
bool
depends on 8260 || MPC8560 || MPC8555
default y
help
The CPM2 (Communications Processor Module) is a coprocessor on
embedded CPUs made by Motorola. Selecting this option means that
you wish to build a kernel for a machine with a CPM2 coprocessor
on it (826x, 827x, 8560).
config PPC_CHRP
bool
depends on PPC_MULTIPLATFORM
default y
config PPC_PMAC
bool
depends on PPC_MULTIPLATFORM
default y
config PPC_PMAC64
bool
depends on PPC_PMAC && POWER4
default y
config PPC_PREP
bool
depends on PPC_MULTIPLATFORM
default y
config PPC_OF
bool
depends on PPC_PMAC || PPC_CHRP
default y
config PPC_GEN550
bool
depends on SANDPOINT || MCPN765 || SPRUCE || PPLUS || PCORE || \
PRPMC750 || K2 || PRPMC800 || LOPEC || \
(EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
83xx
default y
config FORCE
bool
depends on 6xx && (PCORE || POWERPMC250)
default y
config GT64260
bool
depends on EV64260 || CPCI690
default y
config MV64360 # Really MV64360 & MV64460
bool
depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU
default y
config MV64X60
bool
depends on (GT64260 || MV64360)
default y
menu "Set bridge options"
depends on MV64X60
config NOT_COHERENT_CACHE
bool "Turn off Cache Coherency"
default n
help
Some 64x60 bridges lock up when trying to enforce cache coherency.
When this option is selected, cache coherency will be turned off.
Note that this can cause other problems (e.g., stale data being
speculatively loaded via a cached mapping). Use at your own risk.
config MV64X60_BASE
hex "Set bridge base used by firmware"
default "0xf1000000"
help
A firmware can leave the base address of the bridge's registers at
a non-standard location. If so, set this value to reflect the
address of that non-standard location.
config MV64X60_NEW_BASE
hex "Set bridge base used by kernel"
default "0xf1000000"
help
If the current base address of the bridge's registers is not where
you want it, set this value to the address that you want it moved to.
endmenu
config NONMONARCH_SUPPORT
bool "Enable Non-Monarch Support"
depends on PRPMC800
config HARRIER
bool
depends on PRPMC800
default y
config EPIC_SERIAL_MODE
bool
depends on 6xx && (LOPEC || SANDPOINT)
default y
config MPC10X_BRIDGE
bool
depends on PCORE || POWERPMC250 || LOPEC || SANDPOINT
default y
config FSL_OCP
bool
depends on MPC10X_BRIDGE
default y
config MPC10X_OPENPIC
bool
depends on POWERPMC250 || LOPEC || SANDPOINT
default y
config MPC10X_STORE_GATHERING
bool "Enable MPC10x store gathering"
depends on MPC10X_BRIDGE
config CPC710_DATA_GATHERING
bool "Enable CPC710 data gathering"
depends on K2
config HARRIER_STORE_GATHERING
bool "Enable Harrier store gathering"
depends on HARRIER
config MVME5100_IPMC761_PRESENT
bool "MVME5100 configured with an IPMC761"
depends on MVME5100
config SPRUCE_BAUD_33M
bool "Spruce baud clock support"
depends on SPRUCE
config PC_KEYBOARD
bool "PC PS/2 style Keyboard"
depends on 4xx || CPM2
config PPCBUG_NVRAM
bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
default y if PPC_PREP
config SMP
bool "Symmetric multi-processing support"
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, say N. If you have a system with more
than one CPU, say Y. Note that the kernel does not currently
support SMP machines with 603/603e/603ev or PPC750 ("G3") processors
since they have inadequate hardware support for multiprocessor
operation.
If you say N here, the kernel will run on single and multiprocessor
machines, but will use only one CPU of a multiprocessor machine. If
you say Y here, the kernel will run on single-processor machines.
On a single-processor machine, the kernel will run faster if you say
N here.
If you don't know what to do here, say N.
config IRQ_ALL_CPUS
bool "Distribute interrupts on all CPUs by default"
depends on SMP
help
This option gives the kernel permission to distribute IRQs across
multiple CPUs. Saying N here will route all IRQs to the first
CPU. Generally saying Y is safe, although some problems have been
reported with SMP Power Macintoshes with this option enabled.
config NR_CPUS
int "Maximum number of CPUs (2-32)"
range 2 32
depends on SMP
default "4"
config PREEMPT
bool "Preemptible Kernel"
help
This option reduces the latency of the kernel when reacting to
real-time or interactive events by allowing a low priority process to
be preempted even if it is in kernel mode executing a system call.
Say Y here if you are building a kernel for a desktop, embedded
or real-time system. Say N if you are unsure.
config HIGHMEM
bool "High memory support"
source "fs/Kconfig.binfmt"
config PROC_DEVICETREE
bool "Support for Open Firmware device tree in /proc"
depends on PPC_OF && PROC_FS
help
This option adds a device-tree directory under /proc which contains
an image of the device tree that the kernel copies from Open
Firmware. If unsure, say Y here.
config PREP_RESIDUAL
bool "Support for PReP Residual Data"
depends on PPC_PREP
help
Some PReP systems have residual data passed to the kernel by the
firmware. This allows detection of memory size, devices present and
other useful pieces of information. Sometimes this information is
not present or incorrect, in which case it could lead to the machine
behaving incorrectly. If this happens, either disable PREP_RESIDUAL
or pass the 'noresidual' option to the kernel.
If you are running a PReP system, say Y here, otherwise say N.
config PROC_PREPRESIDUAL
bool "Support for reading of PReP Residual Data in /proc"
depends on PREP_RESIDUAL && PROC_FS
help
Enabling this option will create a /proc/residual file which allows
you to get at the residual data on PReP systems. You will need a tool
(lsresidual) to parse it. If you aren't on a PReP system, you don't
want this.
config CMDLINE_BOOL
bool "Default bootloader kernel arguments"
config CMDLINE
string "Initial kernel command string"
depends on CMDLINE_BOOL
default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
help
On some platforms, there is currently no way for the boot loader to
pass arguments to the kernel. For these platforms, you can supply
some command-line options at build time by entering them here. In
most cases you will need to specify the root device here.
config AMIGA
bool
depends on APUS
default y
help
This option enables support for the Amiga series of computers.
config ZORRO
bool
depends on APUS
default y
help
This enables support for the Zorro bus in the Amiga. If you have
expansion cards in your Amiga that conform to the Amiga
AutoConfig(tm) specification, say Y, otherwise N. Note that even
expansion cards that do not fit in the Zorro slots but fit in e.g.
the CPU slot may fall in this category, so you have to say Y to let
Linux use these.
config ABSTRACT_CONSOLE
bool
depends on APUS
default y
config APUS_FAST_EXCEPT
bool
depends on APUS
default y
config AMIGA_PCMCIA
bool "Amiga 1200/600 PCMCIA support"
depends on APUS && EXPERIMENTAL
help
Include support in the kernel for pcmcia on Amiga 1200 and Amiga
600. If you intend to use pcmcia cards say Y; otherwise say N.
config AMIGA_BUILTIN_SERIAL
tristate "Amiga builtin serial support"
depends on APUS
help
If you want to use your Amiga's built-in serial port in Linux,
answer Y.
To compile this driver as a module, choose M here.
config GVPIOEXT
tristate "GVP IO-Extender support"
depends on APUS
help
If you want to use a GVP IO-Extender serial card in Linux, say Y.
Otherwise, say N.
config GVPIOEXT_LP
tristate "GVP IO-Extender parallel printer support"
depends on GVPIOEXT
help
Say Y to enable driving a printer from the parallel port on your
GVP IO-Extender card, N otherwise.
config GVPIOEXT_PLIP
tristate "GVP IO-Extender PLIP support"
depends on GVPIOEXT
help
Say Y to enable doing IP over the parallel port on your GVP
IO-Extender card, N otherwise.
config MULTIFACE_III_TTY
tristate "Multiface Card III serial support"
depends on APUS
help
If you want to use a Multiface III card's serial port in Linux,
answer Y.
To compile this driver as a module, choose M here.
config A2232
tristate "Commodore A2232 serial support (EXPERIMENTAL)"
depends on EXPERIMENTAL && APUS
---help---
This option supports the 2232 7-port serial card shipped with the
Amiga 2000 and other Zorro-bus machines, dating from 1989. At
a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
ports were connected with 8 pin DIN connectors on the card bracket,
for which 8 pin to DB25 adapters were supplied. The card also had
jumpers internally to toggle various pinning configurations.
This driver can be built as a module; but then "generic_serial"
will also be built as a module. This has to be loaded before
"ser_a2232". If you want to do this, answer M here.
config WHIPPET_SERIAL
tristate "Hisoft Whippet PCMCIA serial support"
depends on AMIGA_PCMCIA
help
HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
is no listing for the Whippet in their Amiga section.
config APNE
tristate "PCMCIA NE2000 support"
depends on AMIGA_PCMCIA
help
If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise,
say N.
To compile this driver as a module, choose M here: the
module will be called apne.
config SERIAL_CONSOLE
bool "Support for serial port console"
depends on APUS && (AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y)
config HEARTBEAT
bool "Use power LED as a heartbeat"
depends on APUS
help
Use the power-on LED on your machine as a load meter. The exact
behavior is platform-dependent, but normally the flash frequency is
a hyperbolic function of the 5-minute load average.
config PROC_HARDWARE
bool "/proc/hardware support"
depends on APUS
source "drivers/zorro/Kconfig"
source kernel/power/Kconfig
endmenu
config ISA_DMA_API
bool
default y
menu "Bus options"
config ISA
bool "Support for ISA-bus hardware"
depends on PPC_PREP || PPC_CHRP
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
inside your box. If you have an Apple machine, say N here; if you
have an IBM RS/6000 or pSeries machine or a PReP machine, say Y. If
you have an embedded board, consult your board documentation.
config GENERIC_ISA_DMA
bool
depends on POWER3 || POWER4 || 6xx && !CPM2
default y
config EISA
bool
help
The Extended Industry Standard Architecture (EISA) bus is a bus
architecture used on some older intel-based PCs.
config SBUS
bool
# Yes MCA RS/6000s exist but Linux-PPC does not currently support any
config MCA
bool
config PCI
bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx
default y if !40x && !CPM2 && !8xx && !APUS && !83xx && !85xx
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
default PCI_QSPAN if !4xx && !CPM2 && 8xx
help
Find out whether your system includes a PCI bus. PCI is the name of
a bus system, i.e. the way the CPU talks to the other stuff inside
your box. If you say Y here, the kernel will include drivers and
infrastructure code to support PCI bus devices.
config PCI_DOMAINS
bool
default PCI
config PCI_QSPAN
bool "QSpan PCI"
depends on !4xx && !CPM2 && 8xx
help
Say Y here if you have a system based on a Motorola 8xx-series
embedded processor with a QSPAN PCI interface, otherwise say N.
config PCI_8260
bool
depends on PCI && 8260 && !8272
default y
config 8260_PCI9
bool " Enable workaround for MPC826x erratum PCI 9"
depends on PCI_8260
default y
choice
prompt " IDMA channel for PCI 9 workaround"
depends on 8260_PCI9
config 8260_PCI9_IDMA1
bool "IDMA1"
config 8260_PCI9_IDMA2
bool "IDMA2"
config 8260_PCI9_IDMA3
bool "IDMA3"
config 8260_PCI9_IDMA4
bool "IDMA4"
endchoice
config PCI_PERMEDIA
bool "PCI for Permedia2"
depends on !4xx && !8xx && APUS
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
endmenu
menu "Advanced setup"
config ADVANCED_OPTIONS
bool "Prompt for advanced kernel configuration options"
help
This option will enable prompting for a variety of advanced kernel
configuration options. These options can cause the kernel to not
work if they are set incorrectly, but can be used to optimize certain
aspects of kernel memory management.
Unless you know what you are doing, say N here.
comment "Default settings for advanced configuration options are used"
depends on !ADVANCED_OPTIONS
config HIGHMEM_START_BOOL
bool "Set high memory pool address"
depends on ADVANCED_OPTIONS && HIGHMEM
help
This option allows you to set the base address of the kernel virtual
area used to map high memory pages. This can be useful in
optimizing the layout of kernel virtual memory.
Say N here unless you know what you are doing.
config HIGHMEM_START
hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
default "0xfe000000"
config LOWMEM_SIZE_BOOL
bool "Set maximum low memory"
depends on ADVANCED_OPTIONS
help
This option allows you to set the maximum amount of memory which
will be used as "low memory", that is, memory which the kernel can
access directly, without having to set up a kernel virtual mapping.
This can be useful in optimizing the layout of kernel virtual
memory.
Say N here unless you know what you are doing.
config LOWMEM_SIZE
hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
default "0x30000000"
config KERNEL_START_BOOL
bool "Set custom kernel base address"
depends on ADVANCED_OPTIONS
help
This option allows you to set the kernel virtual address at which
the kernel will map low memory (the kernel image will be linked at
this address). This can be useful in optimizing the virtual memory
layout of the system.
Say N here unless you know what you are doing.
config KERNEL_START
hex "Virtual address of kernel base" if KERNEL_START_BOOL
default "0xc0000000"
config TASK_SIZE_BOOL
bool "Set custom user task size"
depends on ADVANCED_OPTIONS
help
This option allows you to set the amount of virtual address space
allocated to user tasks. This can be useful in optimizing the
virtual memory layout of the system.
Say N here unless you know what you are doing.
config TASK_SIZE
hex "Size of user task space" if TASK_SIZE_BOOL
default "0x80000000"
config CONSISTENT_START_BOOL
bool "Set custom consistent memory pool address"
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
help
This option allows you to set the base virtual address
of the the consistent memory pool. This pool of virtual
memory is used to make consistent memory allocations.
config CONSISTENT_START
hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
default "0xff100000" if NOT_COHERENT_CACHE
config CONSISTENT_SIZE_BOOL
bool "Set custom consistent memory pool size"
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
help
This option allows you to set the size of the the
consistent memory pool. This pool of virtual memory
is used to make consistent memory allocations.
config CONSISTENT_SIZE
hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
default "0x00200000" if NOT_COHERENT_CACHE
config BOOT_LOAD_BOOL
bool "Set the boot link/load address"
depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM
help
This option allows you to set the initial load address of the zImage
or zImage.initrd file. This can be useful if you are on a board
which has a small amount of memory.
Say N here unless you know what you are doing.
config BOOT_LOAD
hex "Link/load address for booting" if BOOT_LOAD_BOOL
default "0x00400000" if 40x || 8xx || 8260
default "0x01000000" if 44x
default "0x00800000"
config PIN_TLB
bool "Pinned Kernel TLBs (860 ONLY)"
depends on ADVANCED_OPTIONS && 8xx
endmenu
source "drivers/Kconfig"
source "fs/Kconfig"
source "arch/ppc/8xx_io/Kconfig"
source "arch/ppc/8260_io/Kconfig"
menu "IBM 40x options"
depends on 40x
config SERIAL_SICC
bool "SICC Serial port"
depends on STB03xxx
config UART1_DFLT_CONSOLE
bool
depends on SERIAL_SICC && UART0_TTYS1
default y
config SERIAL_SICC_CONSOLE
bool
depends on SERIAL_SICC && UART0_TTYS1
default y
endmenu
source "lib/Kconfig"
source "arch/ppc/oprofile/Kconfig"
source "arch/ppc/Kconfig.debug"
source "security/Kconfig"
source "crypto/Kconfig"
