config FADS
bool
choice
prompt "8xx Machine Type"
depends on 8xx
default RPXLITE
config RPXLITE
bool "RPX-Lite"
---help---
Single-board computers based around the PowerPC MPC8xx chips and
intended for embedded applications. The following types are
supported:
RPX-Lite:
Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823.
RPX-Classic:
Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on
the MPC 860
BSE-IP:
Bright Star Engineering ip-Engine.
TQM823L:
TQM850L:
TQM855L:
TQM860L:
MPC8xx based family of mini modules, half credit card size,
up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports,
2 x CAN bus interface, ...
Manufacturer: TQ Components, www.tq-group.de
Date of Release: October (?) 1999
End of Life: not yet :-)
URL:
- module: <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>
- starter kit: <http://www.denx.de/PDF/STK8xxLHWM201.pdf>
- images: <http://www.denx.de/embedded-ppc-en.html>
FPS850L:
FingerPrint Sensor System (based on TQM850L)
Manufacturer: IKENDI AG, <http://www.ikendi.com/>
Date of Release: November 1999
End of life: end 2000 ?
URL: see TQM850L
IVMS8:
MPC860 based board used in the "Integrated Voice Mail System",
Small Version (8 voice channels)
Manufacturer: Speech Design, <http://www.speech-design.de/>
Date of Release: December 2000 (?)
End of life: -
URL: <http://www.speech-design.de/>
IVML24:
MPC860 based board used in the "Integrated Voice Mail System",
Large Version (24 voice channels)
Manufacturer: Speech Design, <http://www.speech-design.de/>
Date of Release: March 2001 (?)
End of life: -
URL: <http://www.speech-design.de/>
HERMES:
Hermes-Pro ISDN/LAN router with integrated 8 x hub
Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik
<http://www.multidata.de/>
Date of Release: 2000 (?)
End of life: -
URL: <http://www.multidata.de/english/products/hpro.htm>
IP860:
VMEBus IP (Industry Pack) carrier board with MPC860
Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
Date of Release: ?
End of life: -
URL: <http://www.microsys.de/html/ip860.html>
PCU_E:
PCU = Peripheral Controller Unit, Extended
Manufacturer: Siemens AG, ICN (Information and Communication Networks)
<http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html>
Date of Release: April 2001
End of life: August 2001
URL: n. a.
config RPXCLASSIC
bool "RPX-Classic"
help
The RPX-Classic is a single-board computer based on the Motorola
MPC860. It features 16MB of DRAM and a variable amount of flash,
I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two
LEDs. Variants with Ethernet ports exist. Say Y here to support it
directly.
config BSEIP
bool "BSE-IP"
help
Say Y here to support the Bright Star Engineering ipEngine SBC.
This is a credit-card-sized device featuring a MPC823 processor,
26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video
controller, and two RS232 ports.
config MPC8XXFADS
bool "FADS"
select FADS
config MPC86XADS
bool "MPC86XADS"
help
MPC86x Application Development System by Freescale Semiconductor.
The MPC86xADS is meant to serve as a platform for s/w and h/w
development around the MPC86X processor families.
select FADS
config MPC885ADS
bool "MPC885ADS"
help
Freescale Semiconductor MPC885 Application Development System (ADS).
Also known as DUET.
The MPC885ADS is meant to serve as a platform for s/w and h/w
development around the MPC885 processor family.
config TQM823L
bool "TQM823L"
help
Say Y here to support the TQM823L, one of an MPC8xx-based family of
mini SBCs (half credit-card size) from TQ Components first released
in late 1999. Technical references are at
<http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
<http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
<http://www.denx.de/embedded-ppc-en.html>.
config TQM850L
bool "TQM850L"
help
Say Y here to support the TQM850L, one of an MPC8xx-based family of
mini SBCs (half credit-card size) from TQ Components first released
in late 1999. Technical references are at
<http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
<http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
<http://www.denx.de/embedded-ppc-en.html>.
config TQM855L
bool "TQM855L"
help
Say Y here to support the TQM855L, one of an MPC8xx-based family of
mini SBCs (half credit-card size) from TQ Components first released
in late 1999. Technical references are at
<http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
<http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
<http://www.denx.de/embedded-ppc-en.html>.
config TQM860L
bool "TQM860L"
help
Say Y here to support the TQM860L, one of an MPC8xx-based family of
mini SBCs (half credit-card size) from TQ Components first released
in late 1999. Technical references are at
<http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
<http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
<http://www.denx.de/embedded-ppc-en.html>.
config FPS850L
bool "FPS850L"
config IVMS8
bool "IVMS8"
help
Say Y here to support the Integrated Voice-Mail Small 8-channel SBC
from Speech Design, released March 2001. The manufacturer's website
is at <http://www.speech-design.de/>.
config IVML24
bool "IVML24"
help
Say Y here to support the Integrated Voice-Mail Large 24-channel SBC
from Speech Design, released March 2001. The manufacturer's website
is at <http://www.speech-design.de/>.
config HERMES_PRO
bool "HERMES"
config IP860
bool "IP860"
config LWMON
bool "LWMON"
config PCU_E
bool "PCU_E"
config CCM
bool "CCM"
config LANTEC
bool "LANTEC"
config MBX
bool "MBX"
help
MBX is a line of Motorola single-board computer based around the
MPC821 and MPC860 processors, and intended for embedded-controller
applications. Say Y here to support these boards directly.
config WINCEPT
bool "WinCept"
help
The Wincept 100/110 is a Motorola single-board computer based on the
MPC821 PowerPC, introduced in 1998 and designed to be used in
thin-client machines. Say Y to support it directly.
endchoice
#
# MPC8xx Communication options
#
menu "MPC8xx CPM Options"
depends on 8xx
config SCC_ENET
bool "CPM SCC Ethernet"
depends on NET_ETHERNET
help
Enable Ethernet support via the Motorola MPC8xx serial
communications controller.
choice
prompt "SCC used for Ethernet"
depends on SCC_ENET
default SCC1_ENET
config SCC1_ENET
bool "SCC1"
help
Use MPC8xx serial communications controller 1 to drive Ethernet
(default).
config SCC2_ENET
bool "SCC2"
help
Use MPC8xx serial communications controller 2 to drive Ethernet.
config SCC3_ENET
bool "SCC3"
help
Use MPC8xx serial communications controller 3 to drive Ethernet.
endchoice
config FEC_ENET
bool "860T FEC Ethernet"
depends on NET_ETHERNET
help
Enable Ethernet support via the Fast Ethernet Controller (FCC) on
the Motorola MPC8260.
config USE_MDIO
bool "Use MDIO for PHY configuration"
depends on FEC_ENET
help
On some boards the hardware configuration of the ethernet PHY can be
used without any software interaction over the MDIO interface, so
all MII code can be omitted. Say N here if unsure or if you don't
need link status reports.
config FEC_AM79C874
bool "Support AMD79C874 PHY"
depends on USE_MDIO
config FEC_LXT970
bool "Support LXT970 PHY"
depends on USE_MDIO
config FEC_LXT971
bool "Support LXT971 PHY"
depends on USE_MDIO
config FEC_QS6612
bool "Support QS6612 PHY"
depends on USE_MDIO
config ENET_BIG_BUFFERS
bool "Use Big CPM Ethernet Buffers"
depends on SCC_ENET || FEC_ENET
help
Allocate large buffers for MPC8xx Ethernet. Increases throughput
and decreases the likelihood of dropped packets, but costs memory.
config HTDMSOUND
bool "Embedded Planet HIOX Audio"
depends on SOUND=y
# This doesn't really belong here, but it is convenient to ask
# 8xx specific questions.
comment "Generic MPC8xx Options"
config 8xx_COPYBACK
bool "Copy-Back Data Cache (else Writethrough)"
help
Saying Y here will cause the cache on an MPC8xx processor to be used
in Copy-Back mode. If you say N here, it is used in Writethrough
mode.
If in doubt, say Y here.
config 8xx_CPU6
bool "CPU6 Silicon Errata (860 Pre Rev. C)"
help
MPC860 CPUs, prior to Rev C have some bugs in the silicon, which
require workarounds for Linux (and most other OSes to work). If you
get a BUG() very early in boot, this might fix the problem. For
more details read the document entitled "MPC860 Family Device Errata
Reference" on Motorola's website. This option also incurs a
performance hit.
If in doubt, say N here.
choice
prompt "Microcode patch selection"
default NO_UCODE_PATCH
help
Help not implemented yet, coming soon.
config NO_UCODE_PATCH
bool "None"
config USB_SOF_UCODE_PATCH
bool "USB SOF patch"
help
Help not implemented yet, coming soon.
config I2C_SPI_UCODE_PATCH
bool "I2C/SPI relocation patch"
help
Help not implemented yet, coming soon.
config I2C_SPI_SMC1_UCODE_PATCH
bool "I2C/SPI/SMC1 relocation patch"
help
Help not implemented yet, coming soon.
endchoice
config UCODE_PATCH
bool
default y
depends on !NO_UCODE_PATCH
endmenu
