/*
* Common prep/pmac/chrp boot and setup code.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/initrd.h>
#include <linux/ide.h>
#include <linux/tty.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/cpu.h>
#include <linux/console.h>
#include <asm/residual.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/setup.h>
#include <asm/amigappc.h>
#include <asm/smp.h>
#include <asm/elf.h>
#include <asm/cputable.h>
#include <asm/bootx.h>
#include <asm/btext.h>
#include <asm/machdep.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/pmac_feature.h>
#include <asm/sections.h>
#include <asm/nvram.h>
#include <asm/xmon.h>
#include <asm/time.h>
#include "setup.h"
#define DBG(fmt...)
#if defined CONFIG_KGDB
#include <asm/kgdb.h>
#endif
extern void platform_init(void);
extern void bootx_init(unsigned long r4, unsigned long phys);
extern void ppc6xx_idle(void);
extern void power4_idle(void);
boot_infos_t *boot_infos;
struct ide_machdep_calls ppc_ide_md;
/* XXX should go elsewhere */
int __irq_offset_value;
EXPORT_SYMBOL(__irq_offset_value);
int boot_cpuid;
EXPORT_SYMBOL_GPL(boot_cpuid);
int boot_cpuid_phys;
unsigned long ISA_DMA_THRESHOLD;
unsigned int DMA_MODE_READ;
unsigned int DMA_MODE_WRITE;
int have_of = 1;
#ifdef CONFIG_PPC_MULTIPLATFORM
extern void prep_init(void);
extern void pmac_init(void);
extern void chrp_init(void);
dev_t boot_dev;
#endif /* CONFIG_PPC_MULTIPLATFORM */
#ifdef CONFIG_MAGIC_SYSRQ
unsigned long SYSRQ_KEY = 0x54;
#endif /* CONFIG_MAGIC_SYSRQ */
#ifdef CONFIG_VGA_CONSOLE
unsigned long vgacon_remap_base;
#endif
struct machdep_calls ppc_md;
EXPORT_SYMBOL(ppc_md);
/*
* These are used in binfmt_elf.c to put aux entries on the stack
* for each elf executable being started.
*/
int dcache_bsize;
int icache_bsize;
int ucache_bsize;
/*
* We're called here very early in the boot. We determine the machine
* type and call the appropriate low-level setup functions.
* -- Cort <cort@fsmlabs.com>
*
* Note that the kernel may be running at an address which is different
* from the address that it was linked at, so we must use RELOC/PTRRELOC
* to access static data (including strings). -- paulus
*/
unsigned long __init early_init(unsigned long dt_ptr)
{
unsigned long offset = reloc_offset();
/* First zero the BSS -- use memset_io, some platforms don't have
* caches on yet */
memset_io(PTRRELOC(&__bss_start), 0, _end - __bss_start);
/*
* Identify the CPU type and fix up code sections
* that depend on which cpu we have.
*/
identify_cpu(offset, 0);
do_cpu_ftr_fixups(offset);
return KERNELBASE + offset;
}
#ifdef CONFIG_PPC_MULTIPLATFORM
/*
* The PPC_MULTIPLATFORM version of platform_init...
*/
void __init platform_init(void)
{
/* if we didn't get any bootinfo telling us what we are... */
if (_machine == 0) {
/* prep boot loader tells us if we're prep or not */
if ( *(unsigned long *)(KERNELBASE) == (0xdeadc0de) )
_machine = _MACH_prep;
}
#ifdef CONFIG_PPC_PREP
/* not much more to do here, if prep */
if (_machine == _MACH_prep) {
prep_init();
return;
}
#endif
#ifdef CONFIG_ADB
if (strstr(cmd_line, "adb_sync")) {
extern int __adb_probe_sync;
__adb_probe_sync = 1;
}
#endif /* CONFIG_ADB */
switch (_machine) {
#ifdef CONFIG_PPC_PMAC
case _MACH_Pmac:
pmac_init();
break;
#endif
#ifdef CONFIG_PPC_CHRP
case _MACH_chrp:
chrp_init();
break;
#endif
}
}
#endif
/*
* Find out what kind of machine we're on and save any data we need
* from the early boot process (devtree is copied on pmac by prom_init()).
* This is called very early on the boot process, after a minimal
* MMU environment has been set up but before MMU_init is called.
*/
void __init machine_init(unsigned long dt_ptr, unsigned long phys)
{
early_init_devtree(__va(dt_ptr));
#ifdef CONFIG_CMDLINE
strlcpy(cmd_line, CONFIG_CMDLINE, sizeof(cmd_line));
#endif /* CONFIG_CMDLINE */
platform_init();
#ifdef CONFIG_6xx
ppc_md.power_save = ppc6xx_idle;
#endif
if (ppc_md.progress)
ppc_md.progress("id mach(): done", 0x200);
}
#ifdef CONFIG_BOOKE_WDT
/* Checks wdt=x and wdt_period=xx command-line option */
int __init early_parse_wdt(char *p)
{
if (p && strncmp(p, "0", 1) != 0)
booke_wdt_enabled = 1;
return 0;
}
early_param("wdt", early_parse_wdt);
int __init early_parse_wdt_period (char *p)
{
if (p)
booke_wdt_period = simple_strtoul(p, NULL, 0);
return 0;
}
early_param("wdt_period", early_parse_wdt_period);
#endif /* CONFIG_BOOKE_WDT */
/* Checks "l2cr=xxxx" command-line option */
int __init ppc_setup_l2cr(char *str)
{
if (cpu_has_feature(CPU_FTR_L2CR)) {
unsigned long val = simple_strtoul(str, NULL, 0);
printk(KERN_INFO "l2cr set to %lx\n", val);
_set_L2CR(0); /* force invalidate by disable cache */
_set_L2CR(val); /* and enable it */
}
return 1;
}
__setup("l2cr=", ppc_setup_l2cr);
#ifdef CONFIG_GENERIC_NVRAM
/* Generic nvram hooks used by drivers/char/gen_nvram.c */
unsigned char nvram_read_byte(int addr)
{
if (ppc_md.nvram_read_val)
return ppc_md.nvram_read_val(addr);
return 0xff;
}
EXPORT_SYMBOL(nvram_read_byte);
void nvram_write_byte(unsigned char val, int addr)
{
if (ppc_md.nvram_write_val)
ppc_md.nvram_write_val(addr, val);
}
EXPORT_SYMBOL(nvram_write_byte);
void nvram_sync(void)
{
if (ppc_md.nvram_sync)
ppc_md.nvram_sync();
}
EXPORT_SYMBOL(nvram_sync);
#endif /* CONFIG_NVRAM */
static struct cpu cpu_devices[NR_CPUS];
int __init ppc_init(void)
{
int i;
/* clear the progress line */
if ( ppc_md.progress ) ppc_md.progress(" ", 0xffff);
/* register CPU devices */
for (i = 0; i < NR_CPUS; i++)
if (cpu_possible(i))
register_cpu(&cpu_devices[i], i, NULL);
/* call platform init */
if (ppc_md.init != NULL) {
ppc_md.init();
}
return 0;
}
arch_initcall(ppc_init);
/* Warning, IO base is not yet inited */
void __init setup_arch(char **cmdline_p)
{
extern void do_init_bootmem(void);
/* so udelay does something sensible, assume <= 1000 bogomips */
loops_per_jiffy = 500000000 / HZ;
unflatten_device_tree();
check_for_initrd();
finish_device_tree();
smp_setup_cpu_maps();
#ifdef CONFIG_BOOTX_TEXT
init_boot_display();
#endif
#ifdef CONFIG_PPC_PMAC
/* This could be called "early setup arch", it must be done
* now because xmon need it
*/
if (_machine == _MACH_Pmac)
pmac_feature_init(); /* New cool way */
#endif
#ifdef CONFIG_XMON_DEFAULT
xmon_init(1);
#endif
#if defined(CONFIG_KGDB)
if (ppc_md.kgdb_map_scc)
ppc_md.kgdb_map_scc();
set_debug_traps();
if (strstr(cmd_line, "gdb")) {
if (ppc_md.progress)
ppc_md.progress("setup_arch: kgdb breakpoint", 0x4000);
printk("kgdb breakpoint activated\n");
breakpoint();
}
#endif
/*
* Set cache line size based on type of cpu as a default.
* Systems with OF can look in the properties on the cpu node(s)
* for a possibly more accurate value.
*/
if (cpu_has_feature(CPU_FTR_SPLIT_ID_CACHE)) {
dcache_bsize = cur_cpu_spec->dcache_bsize;
icache_bsize = cur_cpu_spec->icache_bsize;
ucache_bsize = 0;
} else
ucache_bsize = dcache_bsize = icache_bsize
= cur_cpu_spec->dcache_bsize;
/* reboot on panic */
panic_timeout = 180;
init_mm.start_code = PAGE_OFFSET;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
init_mm.brk = klimit;
/* Save unparsed command line copy for /proc/cmdline */
strlcpy(saved_command_line, cmd_line, COMMAND_LINE_SIZE);
*cmdline_p = cmd_line;
parse_early_param();
/* set up the bootmem stuff with available memory */
do_init_bootmem();
if ( ppc_md.progress ) ppc_md.progress("setup_arch: bootmem", 0x3eab);
#ifdef CONFIG_PPC_OCP
/* Initialize OCP device list */
ocp_early_init();
if ( ppc_md.progress ) ppc_md.progress("ocp: exit", 0x3eab);
#endif
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
ppc_md.setup_arch();
if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
paging_init();
/* this is for modules since _machine can be a define -- Cort */
ppc_md.ppc_machine = _machine;
}
