/*
* P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
&board_ifc {
nor@0,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "cfi-flash";
reg = <0x0 0x0 0x2000000>;
bank-width = <2>;
device-width = <1>;
partition@40000 {
/* 256KB for DTB Image */
reg = <0x00040000 0x00040000>;
label = "NOR DTB Image";
};
partition@80000 {
/* 7 MB for Linux Kernel Image */
reg = <0x00080000 0x00700000>;
label = "NOR Linux Kernel Image";
};
partition@800000 {
/* 20MB for JFFS2 based Root file System */
reg = <0x00800000 0x01400000>;
label = "NOR JFFS2 Root File System";
};
partition@1f00000 {
/* This location must not be altered */
/* 512KB for u-boot Bootloader Image */
/* 512KB for u-boot Environment Variables */
reg = <0x01f00000 0x00100000>;
label = "NOR U-Boot Image";
read-only;
};
};
nand@1,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,ifc-nand";
reg = <0x1 0x0 0x10000>;
partition@0 {
/* This location must not be altered */
/* 1MB for u-boot Bootloader Image */
reg = <0x0 0x00100000>;
label = "NAND U-Boot Image";
read-only;
};
partition@100000 {
/* 1MB for DTB Image */
reg = <0x00100000 0x00100000>;
label = "NAND DTB Image";
};
partition@200000 {
/* 4MB for Linux Kernel Image */
reg = <0x00200000 0x00400000>;
label = "NAND Linux Kernel Image";
};
partition@600000 {
/* 4MB for Compressed Root file System Image */
reg = <0x00600000 0x00400000>;
label = "NAND Compressed RFS Image";
};
partition@a00000 {
/* 15MB for JFFS2 based Root file System */
reg = <0x00a00000 0x00f00000>;
label = "NAND JFFS2 Root File System";
};
partition@1900000 {
/* 7MB for User Area */
reg = <0x01900000 0x00700000>;
label = "NAND User area";
};
};
cpld@3,0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,p1010rdb-cpld";
reg = <0x3 0x0 0x0000020>;
bank-width = <1>;
device-width = <1>;
};
};
&board_soc {
i2c@3000 {
eeprom@50 {
compatible = "st,24c256";
reg = <0x50>;
};
rtc@68 {
compatible = "pericom,pt7c4338";
reg = <0x68>;
};
};
i2c@3100 {
eeprom@52 {
compatible = "atmel,24c01";
reg = <0x52>;
};
};
spi@7000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <40000000>;
partition@0 {
/* 1MB for u-boot Bootloader Image */
/* 1MB for Environment */
reg = <0x0 0x00100000>;
label = "SPI Flash U-Boot Image";
read-only;
};
partition@100000 {
/* 512KB for DTB Image */
reg = <0x00100000 0x00080000>;
label = "SPI Flash DTB Image";
};
partition@180000 {
/* 4MB for Linux Kernel Image */
reg = <0x00180000 0x00400000>;
label = "SPI Flash Linux Kernel Image";
};
partition@580000 {
/* 4MB for Compressed RFS Image */
reg = <0x00580000 0x00400000>;
label = "SPI Flash Compressed RFSImage";
};
partition@980000 {
/* 6.5MB for JFFS2 based RFS */
reg = <0x00980000 0x00680000>;
label = "SPI Flash JFFS2 RFS";
};
};
};
usb@22000 {
phy_type = "utmi";
dr_mode = "host";
};
mdio@24000 {
phy0: ethernet-phy@0 {
interrupts = <3 1 0 0>;
reg = <0x1>;
};
phy1: ethernet-phy@1 {
interrupts = <2 1 0 0>;
reg = <0x0>;
};
phy2: ethernet-phy@2 {
interrupts = <2 1 0 0>;
reg = <0x2>;
};
tbi-phy@3 {
device_type = "tbi-phy";
reg = <0x3>;
};
};
mdio@25000 {
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
mdio@26000 {
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
enet0: ethernet@b0000 {
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
enet1: ethernet@b1000 {
phy-handle = <&phy1>;
tbi-handle = <&tbi0>;
phy-connection-type = "sgmii";
};
enet2: ethernet@b2000 {
phy-handle = <&phy2>;
tbi-handle = <&tbi1>;
phy-connection-type = "sgmii";
};
};
