blob: cdc4a94e9c289ca3eea40d91739ada833e894936 (
plain) (
tree)
|
|
/*
* MPC832x RDB Device Tree Source
*
* Copyright 2007 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/ {
model = "MPC8323ERDB";
compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB";
#address-cells = <1>;
#size-cells = <1>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8323@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <20>; // 32 bytes
i-cache-line-size = <20>; // 32 bytes
d-cache-size = <4000>; // L1, 16K
i-cache-size = <4000>; // L1, 16K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
};
};
memory {
device_type = "memory";
reg = <00000000 04000000>;
};
soc8323@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0 e0000000 00100000>;
reg = <e0000000 00000200>;
bus-frequency = <0>;
wdt@200 {
device_type = "watchdog";
compatible = "mpc83xx_wdt";
reg = <200 100>;
};
i2c@3000 {
device_type = "i2c";
compatible = "fsl-i2c";
reg = <3000 100>;
interrupts = <e 8>;
interrupt-parent = <&pic>;
dfsrr;
};
serial@4500 {
device_type = "serial";
compatible = "ns16550";
reg = <4500 100>;
clock-frequency = <0>;
interrupts = <9 8>;
interrupt-parent = <&pic>;
};
serial@4600 {
device_type = "serial";
compatible = "ns16550";
reg = <4600 100>;
clock-frequency = <0>;
interrupts = <a 8>;
interrupt-parent = <&pic>;
};
crypto@30000 {
device_type = "crypto";
model = "SEC2";
compatible = "talitos";
reg = <30000 7000>;
interrupts = <b 8>;
interrupt-parent = <&pic>;
/* Rev. 2.2 */
num-channels = <1>;
channel-fifo-len = <18>;
exec-units-mask = <0000004c>;
descriptor-types-mask = <0122003f>;
};
pic:pic@700 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <700 100>;
device_type = "ipic";
};
par_io@1400 {
reg = <1400 100>;
device_type = "par_io";
num-ports = <7>;
ucc2pio:ucc_pin@02 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
3 4 3 0 2 0 /* MDIO */
3 5 1 0 2 0 /* MDC */
3 15 2 0 1 0 /* RX_CLK (CLK16) */
3 17 2 0 1 0 /* TX_CLK (CLK3) */
0 12 1 0 1 0 /* TxD0 */
0 13 1 0 1 0 /* TxD1 */
0 14 1 0 1 0 /* TxD2 */
0 15 1 0 1 0 /* TxD3 */
0 16 2 0 1 0 /* RxD0 */
0 17 2 0 1 0 /* RxD1 */
0 18 2 0 1 0 /* RxD2 */
0 19 2 0 1 0 /* RxD3 */
0 1a 2 0 1 0 /* RX_ER */
0 1b 1 0 1 0 /* TX_ER */
0 1c 2 0 1 0 /* RX_DV */
0 1d 2 0 1 0 /* COL */
0 1e 1 0 1 0 /* TX_EN */
0 1f 2 0 1 0>; /* CRS */
};
ucc3pio:ucc_pin@03 {
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 d 2 0 1 0 /* RX_CLK (CLK9) */
3 18 2 0 1 0 /* TX_CLK (CLK10) */
1 0 1 0 1 0 /* TxD0 */
1 1 1 0 1 0 /* TxD1 */
1 2 1 0 1 0 /* TxD2 */
1 3 1 0 1 0 /* TxD3 */
1 4 2 0 1 0 /* RxD0 */
1 5 2 0 1 0 /* RxD1 */
1 6 2 0 1 0 /* RxD2 */
1 7 2 0 1 0 /* RxD3 */
1 8 2 0 1 0 /* RX_ER */
1 9 1 0 1 0 /* TX_ER */
1 a 2 0 1 0 /* RX_DV */
1 b 2 0 1 0 /* COL */
1 c 1 0 1 0 /* TX_EN */
1 d 2 0 1 0>; /* CRS */
};
};
};
qe@e0100000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "qe";
model = "QE";
ranges = <0 e0100000 00100000>;
reg = <e0100000 480>;
brg-frequency = <0>;
bus-frequency = <BCD3D80>;
muram@10000 {
device_type = "muram";
ranges = <0 00010000 00004000>;
data-only@0 {
reg = <0 4000>;
};
};
spi@4c0 {
device_type = "spi";
compatible = "fsl_spi";
reg = <4c0 40>;
interrupts = <2>;
interrupt-parent = <&qeic>;
mode = "cpu";
};
spi@500 {
device_type = "spi";
compatible = "fsl_spi";
reg = <500 40>;
interrupts = <1>;
interrupt-parent = <&qeic>;
mode = "cpu";
};
ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
model = "UCC";
device-id = <2>;
reg = <3000 200>;
interrupts = <21>;
interrupt-parent = <&qeic>;
/*
* mac-address is deprecated and will be removed
* in 2.6.25. Only recent versions of
* U-Boot support local-mac-address, however.
*/
mac-address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock = <20>;
tx-clock = <13>;
phy-handle = <&phy00>;
pio-handle = <&ucc2pio>;
};
ucc@2200 {
device_type = "network";
compatible = "ucc_geth";
model = "UCC";
device-id = <3>;
reg = <2200 200>;
interrupts = <22>;
interrupt-parent = <&qeic>;
/*
* mac-address is deprecated and will be removed
* in 2.6.25. Only recent versions of
* U-Boot support local-mac-address, however.
*/
mac-address = [ 00 00 00 00 00 00 ];
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock = <19>;
tx-clock = <1a>;
phy-handle = <&phy04>;
pio-handle = <&ucc3pio>;
};
mdio@3120 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3120 18>;
device_type = "mdio";
compatible = "ucc_geth_phy";
phy00:ethernet-phy@00 {
interrupt-parent = <&pic>;
interrupts = <0>;
reg = <0>;
device_type = "ethernet-phy";
};
phy04:ethernet-phy@04 {
interrupt-parent = <&pic>;
interrupts = <0>;
reg = <4>;
device_type = "ethernet-phy";
};
};
qeic:qeic@80 {
interrupt-controller;
device_type = "qeic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <80 80>;
big-endian;
interrupts = <20 8 21 8>; //high:32 low:33
interrupt-parent = <&pic>;
};
};
pci@e0008500 {
interrupt-map-mask = <f800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 AD16 (USB) */
8000 0 0 1 &pic 11 8
/* IDSEL 0x11 AD17 (Mini1)*/
8800 0 0 1 &pic 12 8
8800 0 0 2 &pic 13 8
8800 0 0 3 &pic 14 8
8800 0 0 4 &pic 30 8
/* IDSEL 0x12 AD18 (PCI/Mini2) */
9000 0 0 1 &pic 13 8
9000 0 0 2 &pic 14 8
9000 0 0 3 &pic 30 8
9000 0 0 4 &pic 11 8>;
interrupt-parent = <&pic>;
interrupts = <42 8>;
bus-range = <0 0>;
ranges = <42000000 0 80000000 80000000 0 10000000
02000000 0 90000000 90000000 0 10000000
01000000 0 d0000000 d0000000 0 04000000>;
clock-frequency = <0>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <e0008500 100>;
compatible = "fsl,mpc8349-pci";
device_type = "pci";
};
};
|
