# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#
mainmenu "Linux/PowerPC Kernel Configuration"
config PPC64
bool "64-bit kernel"
default n
help
This option selects whether a 32-bit or a 64-bit kernel
will be built.
config PPC32
bool
default y if !PPC64
config 64BIT
bool
default y if PPC64
config PPC_MERGE
def_bool y
config MMU
bool
default y
config UID16
bool
config GENERIC_HARDIRQS
bool
default y
config RWSEM_GENERIC_SPINLOCK
bool
config RWSEM_XCHGADD_ALGORITHM
bool
default y
config GENERIC_CALIBRATE_DELAY
bool
default y
config PPC
bool
default y
config EARLY_PRINTK
bool
default y if PPC64
config COMPAT
bool
default y if PPC64
config SYSVIPC_COMPAT
bool
depends on COMPAT && SYSVIPC
default y
# All PPC32s use generic nvram driver through ppc_md
config GENERIC_NVRAM
bool
default y if PPC32
config SCHED_NO_NO_OMIT_FRAME_POINTER
bool
default y
config ARCH_MAY_HAVE_PC_FDC
bool
default y
menu "Processor support"
choice
prompt "Processor Type"
depends on PPC32
default 6xx
config 6xx
bool "6xx/7xx/74xx"
select PPC_FPU
help
There are four families of PowerPC chips supported. The more common
types (601, 603, 604, 740, 750, 7400), the Motorola embedded
versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the AMCC
embedded versions (403 and 405) and the high end 64 bit Power
processors (POWER 3, POWER4, and IBM PPC970 also known as G5).
Unless you are building a kernel for one of the embedded processor
systems, 64 bit IBM RS/6000 or an Apple G5, choose 6xx.
Note that the kernel runs in 32-bit mode even on 64-bit chips.
config PPC_52xx
bool "Freescale 52xx"
config PPC_82xx
bool "Freescale 82xx"
config PPC_83xx
bool "Freescale 83xx"
config 40x
bool "AMCC 40x"
config 44x
bool "AMCC 44x"
config 8xx
bool "Freescale 8xx"
config E200
bool "Freescale e200"
config E500
bool "Freescale e500"
endchoice
config POWER4_ONLY
bool "Optimize for POWER4"
depends on PPC64
default n
---help---
Cause the compiler to optimize for POWER4/POWER5/PPC970 processors.
The resulting binary will not work on POWER3 or RS64 processors
when compiled with binutils 2.15 or later.
config POWER3
bool
depends on PPC64
default y if !POWER4_ONLY
config POWER4
depends on PPC64
def_bool y
config PPC_FPU
bool
default y if PPC64
config BOOKE
bool
depends on E200 || E500
default y
config FSL_BOOKE
bool
depends on E200 || E500
default y
config PTE_64BIT
bool
depends on 44x || E500
default y if 44x
default y if E500 && PHYS_64BIT
config PHYS_64BIT
bool 'Large physical address support' if E500
depends on 44x || E500
default y if 44x
---help---
This option enables kernel support for larger than 32-bit physical
addresses. This features is not be available on all e500 cores.
If in doubt, say N here.
config ALTIVEC
bool "AltiVec Support"
depends on 6xx || POWER4
---help---
This option enables kernel support for the Altivec extensions to the
PowerPC processor. The kernel currently supports saving and restoring
altivec registers, and turning on the 'altivec enable' bit so user
processes can execute altivec instructions.
This option is only usefully if you have a processor that supports
altivec (G4, otherwise known as 74xx series), but does not have
any affect on a non-altivec cpu (it does, however add code to the
kernel).
If in doubt, say Y here.
config SPE
bool "SPE Support"
depends on E200 || E500
---help---
This option enables kernel support for the Signal Processing
Extensions (SPE) to the PowerPC processor. The kernel currently
supports saving and restoring SPE registers, and turning on the
'spe enable' bit so user processes can execute SPE instructions.
This option is only useful if you have a processor that supports
SPE (e500, otherwise known as 85xx series), but does not have any
effect on a non-spe cpu (it does, however add code to the kernel).
If in doubt, say Y here.
config PPC_STD_MMU
bool
depends on 6xx || POWER3 || POWER4 || PPC64
default y
config PPC_STD_MMU_32
def_bool y
depends on PPC_STD_MMU && PPC32
config SMP
depends on PPC_STD_MMU
bool "Symmetric multi-processing support"
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, say N. If you have a system with more
than one CPU, say Y. Note that the kernel does not currently
support SMP machines with 603/603e/603ev or PPC750 ("G3") processors
since they have inadequate hardware support for multiprocessor
operation.
If you say N here, the kernel will run on single and multiprocessor
machines, but will use only one CPU of a multiprocessor machine. If
you say Y here, the kernel will run on single-processor machines.
On a single-processor machine, the kernel will run faster if you say
N here.
If you don't know what to do here, say N.
config NR_CPUS
int "Maximum number of CPUs (2-128)"
range 2 128
depends on SMP
default "32" if PPC64
default "4"
config NOT_COHERENT_CACHE
bool
depends on 4xx || 8xx || E200
default y
endmenu
source "init/Kconfig"
menu "Platform support"
depends on PPC64 || 6xx
choice
prompt "Machine type"
default PPC_MULTIPLATFORM
config PPC_MULTIPLATFORM
bool "Generic desktop/server/laptop"
help
Select this option if configuring for an IBM pSeries or
RS/6000 machine, an Apple machine, or a PReP, CHRP,
Maple or Cell-based machine.
config PPC_ISERIES
bool "IBM Legacy iSeries"
depends on PPC64
config EMBEDDED6xx
bool "Embedded 6xx/7xx/7xxx-based board"
depends on PPC32 && BROKEN
config APUS
bool "Amiga-APUS"
depends on PPC32 && BROKEN
help
Select APUS if configuring for a PowerUP Amiga.
More information is available at:
<http://linux-apus.sourceforge.net/>.
endchoice
config PPC_PSERIES
depends on PPC_MULTIPLATFORM && PPC64
bool " IBM pSeries & new (POWER5-based) iSeries"
select PPC_I8259
select PPC_RTAS
select RTAS_ERROR_LOGGING
default y
config PPC_CHRP
bool " Common Hardware Reference Platform (CHRP) based machines"
depends on PPC_MULTIPLATFORM && PPC32
select PPC_I8259
select PPC_INDIRECT_PCI
select PPC_RTAS
select PPC_MPC106
default y
config PPC_PMAC
bool " Apple PowerMac based machines"
depends on PPC_MULTIPLATFORM
select PPC_INDIRECT_PCI if PPC32
select PPC_MPC106 if PPC32
default y
config PPC_PMAC64
bool
depends on PPC_PMAC && POWER4
select U3_DART
select GENERIC_TBSYNC
default y
config PPC_PREP
bool " PowerPC Reference Platform (PReP) based machines"
depends on PPC_MULTIPLATFORM && PPC32 && BROKEN
select PPC_I8259
select PPC_INDIRECT_PCI
default y
config PPC_MAPLE
depends on PPC_MULTIPLATFORM && PPC64
bool " Maple 970FX Evaluation Board"
select U3_DART
select MPIC_BROKEN_U3
select GENERIC_TBSYNC
default n
help
This option enables support for the Maple 970FX Evaluation Board.
For more informations, refer to <http://www.970eval.com>
config PPC_CELL
bool " Cell Broadband Processor Architecture"
depends on PPC_MULTIPLATFORM && PPC64
select PPC_RTAS
select MMIO_NVRAM
config PPC_OF
bool
depends on PPC_MULTIPLATFORM # for now
default y
config XICS
depends on PPC_PSERIES
bool
default y
config U3_DART
bool
depends on PPC_MULTIPLATFORM && PPC64
default n
config MPIC
depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP
bool
default y
config PPC_RTAS
bool
default n
config RTAS_ERROR_LOGGING
bool
depends on PPC_RTAS
default n
config RTAS_PROC
bool "Proc interface to RTAS"
depends on PPC_RTAS
default y
config RTAS_FLASH
tristate "Firmware flash interface"
depends on PPC64 && RTAS_PROC
config MMIO_NVRAM
bool
default n
config MPIC_BROKEN_U3
bool
depends on PPC_MAPLE
default y
config CELL_IIC
depends on PPC_CELL
bool
default y
config IBMVIO
depends on PPC_PSERIES || PPC_ISERIES
bool
default y
config PPC_MPC106
bool
default n
config GENERIC_TBSYNC
bool
default y if CONFIG_PPC32 && CONFIG_SMP
default n
source "drivers/cpufreq/Kconfig"
config CPU_FREQ_PMAC
bool "Support for Apple PowerBooks"
depends on CPU_FREQ && ADB_PMU && PPC32
select CPU_FREQ_TABLE
help
This adds support for frequency switching on Apple PowerBooks,
this currently includes some models of iBook & Titanium
PowerBook.
config CPU_FREQ_PMAC64
bool "Support for some Apple G5s"
depends on CPU_FREQ && PMAC_SMU && PPC64
select CPU_FREQ_TABLE
help
This adds support for frequency switching on Apple iMac G5,
and some of the more recent desktop G5 machines as well.
config PPC601_SYNC_FIX
bool "Workarounds for PPC601 bugs"
depends on 6xx && (PPC_PREP || PPC_PMAC)
help
Some versions of the PPC601 (the first PowerPC chip) have bugs which
mean that extra synchronization instructions are required near
certain instructions, typically those that make major changes to the
CPU state. These extra instructions reduce performance slightly.
If you say N here, these extra instructions will not be included,
resulting in a kernel which will run faster but may not run at all
on some systems with the PPC601 chip.
If in doubt, say Y here.
config TAU
bool "Thermal Management Support"
depends on 6xx
help
G3 and G4 processors have an on-chip temperature sensor called the
'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
temperature within 2-4 degrees Celsius. This option shows the current
on-die temperature in /proc/cpuinfo if the cpu supports it.
Unfortunately, on some chip revisions, this sensor is very inaccurate
and in some cases, does not work at all, so don't assume the cpu
temp is actually what /proc/cpuinfo says it is.
config TAU_INT
bool "Interrupt driven TAU driver (DANGEROUS)"
depends on TAU
---help---
The TAU supports an interrupt driven mode which causes an interrupt
whenever the temperature goes out of range. This is the fastest way
to get notified the temp has exceeded a range. With this option off,
a timer is used to re-check the temperature periodically.
However, on some cpus it appears that the TAU interrupt hardware
is buggy and can cause a situation which would lead unexplained hard
lockups.
Unless you are extending the TAU driver, or enjoy kernel/hardware
debugging, leave this option off.
config TAU_AVERAGE
bool "Average high and low temp"
depends on TAU
---help---
The TAU hardware can compare the temperature to an upper and lower
bound. The default behavior is to show both the upper and lower
bound in /proc/cpuinfo. If the range is large, the temperature is
either changing a lot, or the TAU hardware is broken (likely on some
G4's). If the range is small (around 4 degrees), the temperature is
relatively stable. If you say Y here, a single temperature value,
halfway between the upper and lower bounds, will be reported in
/proc/cpuinfo.
If in doubt, say N here.
endmenu
source arch/powerpc/platforms/embedded6xx/Kconfig
source arch/powerpc/platforms/4xx/Kconfig
source arch/powerpc/platforms/85xx/Kconfig
source arch/powerpc/platforms/8xx/Kconfig
menu "Kernel options"
config HIGHMEM
bool "High memory support"
depends on PPC32
source kernel/Kconfig.hz
source kernel/Kconfig.preempt
source "fs/Kconfig.binfmt"
# We optimistically allocate largepages from the VM, so make the limit
# large enough (16MB). This badly named config option is actually
# max order + 1
config FORCE_MAX_ZONEORDER
int
depends on PPC64
default "9" if PPC_64K_PAGES
default "13"
config MATH_EMULATION
bool "Math emulation"
depends on 4xx || 8xx || E200 || E500
---help---
Some PowerPC chips designed for embedded applications do not have
a floating-point unit and therefore do not implement the
floating-point instructions in the PowerPC instruction set. If you
say Y here, the kernel will include code to emulate a floating-point
unit, which will allow programs that use floating-point
instructions to run.
config IOMMU_VMERGE
bool "Enable IOMMU virtual merging (EXPERIMENTAL)"
depends on EXPERIMENTAL && PPC64
default n
help
Cause IO segments sent to a device for DMA to be merged virtually
by the IOMMU when they happen to have been allocated contiguously.
This doesn't add pressure to the IOMMU allocator. However, some
drivers don't support getting large merged segments coming back
from *_map_sg(). Say Y if you know the drivers you are using are
properly handling this case.
config HOTPLUG_CPU
bool "Support for enabling/disabling CPUs"
depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
---help---
Say Y here to be able to disable and re-enable individual
CPUs at runtime on SMP machines.
Say N if you are unsure.
config KEXEC
bool "kexec system call (EXPERIMENTAL)"
depends on PPC_MULTIPLATFORM && EXPERIMENTAL
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
but it is indepedent of the system firmware. And like a reboot
you can start any kernel with it, not just Linux.
The name comes from the similiarity to the exec system call.
It is an ongoing process to be certain the hardware in a machine
is properly shutdown, so do not be surprised if this code does not
initially work for you. It may help to enable device hotplugging
support. As of this writing the exact hardware interface is
strongly in flux, so no good recommendation can be made.
config EMBEDDEDBOOT
bool
depends on 8xx || 8260
default y
config PC_KEYBOARD
bool "PC PS/2 style Keyboard"
depends on 4xx || CPM2
config PPCBUG_NVRAM
bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
default y if PPC_PREP
config IRQ_ALL_CPUS
bool "Distribute interrupts on all CPUs by default"
depends on SMP && !MV64360
help
This option gives the kernel permission to distribute IRQs across
multiple CPUs. Saying N here will route all IRQs to the first
CPU. Generally saying Y is safe, although some problems have been
reported with SMP Power Macintoshes with this option enabled.
source "arch/powerpc/platforms/pseries/Kconfig"
config NUMA
bool "NUMA support"
depends on PPC64
default y if SMP && PPC_PSERIES
config ARCH_SELECT_MEMORY_MODEL
def_bool y
depends on PPC64
config ARCH_FLATMEM_ENABLE
def_bool y
depends on PPC64 && !NUMA
config ARCH_SPARSEMEM_ENABLE
def_bool y
config ARCH_SPARSEMEM_DEFAULT
def_bool y
depends on SMP && PPC_PSERIES
source "mm/Kconfig"
config HAVE_ARCH_EARLY_PFN_TO_NID
def_bool y
depends on NEED_MULTIPLE_NODES
config ARCH_MEMORY_PROBE
def_bool y
depends on MEMORY_HOTPLUG
config PPC_64K_PAGES
bool "64k page size"
depends on PPC64
help
This option changes the kernel logical page size to 64k. On machines
without processor support for 64k pages, the kernel will simulate
them by loading each individual 4k page on demand transparently,
while on hardware with such support, it will be used to map
normal application pages.
config SCHED_SMT
bool "SMT (Hyperthreading) scheduler support"
depends on PPC64 && SMP
default off
help
SMT scheduler support improves the CPU scheduler's decision making
when dealing with POWER5 cpus at a cost of slightly increased
overhead in some places. If unsure say N here.
config PROC_DEVICETREE
bool "Support for device tree in /proc"
depends on PROC_FS
help
This option adds a device-tree directory under /proc which contains
an image of the device tree that the kernel copies from Open
Firmware or other boot firmware. If unsure, say Y here.
source "arch/powerpc/platforms/prep/Kconfig"
config CMDLINE_BOOL
bool "Default bootloader kernel arguments"
depends on !PPC_ISERIES
config CMDLINE
string "Initial kernel command string"
depends on CMDLINE_BOOL
default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
help
On some platforms, there is currently no way for the boot loader to
pass arguments to the kernel. For these platforms, you can supply
some command-line options at build time by entering them here. In
most cases you will need to specify the root device here.
if !44x || BROKEN
source kernel/power/Kconfig
endif
config SECCOMP
bool "Enable seccomp to safely compute untrusted bytecode"
depends on PROC_FS
default y
help
This kernel feature is useful for number crunching applications
that may need to compute untrusted bytecode during their
execution. By using pipes or other transports made available to
the process as file descriptors supporting the read/write
syscalls, it's possible to isolate those applications in
their own address space using seccomp. Once seccomp is
enabled via /proc/<pid>/seccomp, it cannot be disabled
and the task is only allowed to execute a few safe syscalls
defined by each seccomp mode.
If unsure, say Y. Only embedded should say N here.
endmenu
config ISA_DMA_API
bool
default y
menu "Bus options"
config ISA
bool "Support for ISA-bus hardware"
depends on PPC_PREP || PPC_CHRP
select PPC_I8259
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
inside your box. If you have an Apple machine, say N here; if you
have an IBM RS/6000 or pSeries machine or a PReP machine, say Y. If
you have an embedded board, consult your board documentation.
config GENERIC_ISA_DMA
bool
depends on PPC64 || POWER4 || 6xx && !CPM2
default y
config PPC_I8259
bool
default y if 85xx
default n
config PPC_INDIRECT_PCI
bool
depends on PCI
default y if 40x || 44x || 85xx || 83xx
default n
config EISA
bool
config SBUS
bool
# Yes MCA RS/6000s exist but Linux-PPC does not currently support any
config MCA
bool
config PCI
bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx || (EMBEDDED && PPC_ISERIES)
default y if !40x && !CPM2 && !8xx && !APUS && !83xx && !85xx
default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
default PCI_QSPAN if !4xx && !CPM2 && 8xx
help
Find out whether your system includes a PCI bus. PCI is the name of
a bus system, i.e. the way the CPU talks to the other stuff inside
your box. If you say Y here, the kernel will include drivers and
infrastructure code to support PCI bus devices.
config PCI_DOMAINS
bool
default PCI
config MPC83xx_PCI2
bool " Supprt for 2nd PCI host controller"
depends on PCI && MPC834x
default y if MPC834x_SYS
config PCI_QSPAN
bool "QSpan PCI"
depends on !4xx && !CPM2 && 8xx
select PPC_I8259
help
Say Y here if you have a system based on a Motorola 8xx-series
embedded processor with a QSPAN PCI interface, otherwise say N.
config PCI_8260
bool
depends on PCI && 8260
select PPC_INDIRECT_PCI
default y
config 8260_PCI9
bool " Enable workaround for MPC826x erratum PCI 9"
depends on PCI_8260 && !ADS8272
default y
choice
prompt " IDMA channel for PCI 9 workaround"
depends on 8260_PCI9
config 8260_PCI9_IDMA1
bool "IDMA1"
config 8260_PCI9_IDMA2
bool "IDMA2"
config 8260_PCI9_IDMA3
bool "IDMA3"
config 8260_PCI9_IDMA4
bool "IDMA4"
endchoice
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
source "drivers/pci/hotplug/Kconfig"
endmenu
menu "Advanced setup"
depends on PPC32
config ADVANCED_OPTIONS
bool "Prompt for advanced kernel configuration options"
help
This option will enable prompting for a variety of advanced kernel
configuration options. These options can cause the kernel to not
work if they are set incorrectly, but can be used to optimize certain
aspects of kernel memory management.
Unless you know what you are doing, say N here.
comment "Default settings for advanced configuration options are used"
depends on !ADVANCED_OPTIONS
config HIGHMEM_START_BOOL
bool "Set high memory pool address"
depends on ADVANCED_OPTIONS && HIGHMEM
help
This option allows you to set the base address of the kernel virtual
area used to map high memory pages. This can be useful in
optimizing the layout of kernel virtual memory.
Say N here unless you know what you are doing.
config HIGHMEM_START
hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
default "0xfe000000"
config LOWMEM_SIZE_BOOL
bool "Set maximum low memory"
depends on ADVANCED_OPTIONS
help
This option allows you to set the maximum amount of memory which
will be used as "low memory", that is, memory which the kernel can
access directly, without having to set up a kernel virtual mapping.
This can be useful in optimizing the layout of kernel virtual
memory.
Say N here unless you know what you are doing.
config LOWMEM_SIZE
hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
default "0x30000000"
config KERNEL_START_BOOL
bool "Set custom kernel base address"
depends on ADVANCED_OPTIONS
help
This option allows you to set the kernel virtual address at which
the kernel will map low memory (the kernel image will be linked at
this address). This can be useful in optimizing the virtual memory
layout of the system.
Say N here unless you know what you are doing.
config KERNEL_START
hex "Virtual address of kernel base" if KERNEL_START_BOOL
default "0xc0000000"
config TASK_SIZE_BOOL
bool "Set custom user task size"
depends on ADVANCED_OPTIONS
help
This option allows you to set the amount of virtual address space
allocated to user tasks. This can be useful in optimizing the
virtual memory layout of the system.
Say N here unless you know what you are doing.
config TASK_SIZE
hex "Size of user task space" if TASK_SIZE_BOOL
default "0x80000000"
config CONSISTENT_START_BOOL
bool "Set custom consistent memory pool address"
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
help
This option allows you to set the base virtual address
of the the consistent memory pool. This pool of virtual
memory is used to make consistent memory allocations.
config CONSISTENT_START
hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
default "0xff100000" if NOT_COHERENT_CACHE
config CONSISTENT_SIZE_BOOL
bool "Set custom consistent memory pool size"
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
help
This option allows you to set the size of the the
consistent memory pool. This pool of virtual memory
is used to make consistent memory allocations.
config CONSISTENT_SIZE
hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
default "0x00200000" if NOT_COHERENT_CACHE
config BOOT_LOAD_BOOL
bool "Set the boot link/load address"
depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM
help
This option allows you to set the initial load address of the zImage
or zImage.initrd file. This can be useful if you are on a board
which has a small amount of memory.
Say N here unless you know what you are doing.
config BOOT_LOAD
hex "Link/load address for booting" if BOOT_LOAD_BOOL
default "0x00400000" if 40x || 8xx || 8260
default "0x01000000" if 44x
default "0x00800000"
config PIN_TLB
bool "Pinned Kernel TLBs (860 ONLY)"
depends on ADVANCED_OPTIONS && 8xx
endmenu
if PPC64
config KERNEL_START
hex
default "0xc000000000000000"
endif
source "net/Kconfig"
source "drivers/Kconfig"
source "fs/Kconfig"
# XXX source "arch/ppc/8xx_io/Kconfig"
# XXX source "arch/ppc/8260_io/Kconfig"
source "arch/powerpc/platforms/iseries/Kconfig"
source "lib/Kconfig"
menu "Instrumentation Support"
depends on EXPERIMENTAL
source "arch/powerpc/oprofile/Kconfig"
config KPROBES
bool "Kprobes (EXPERIMENTAL)"
depends on PPC64
help
Kprobes allows you to trap at almost any kernel address and
execute a callback function. register_kprobe() establishes
a probepoint and specifies the callback. Kprobes is useful
for kernel debugging, non-intrusive instrumentation and testing.
If in doubt, say "N".
endmenu
source "arch/powerpc/Kconfig.debug"
source "security/Kconfig"
config KEYS_COMPAT
bool
depends on COMPAT && KEYS
default y
source "crypto/Kconfig"
