/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Unified implementation of memcpy, memmove and the __copy_user backend.
*
* Copyright (C) 1998, 99, 2000, 01, 2002 Ralf Baechle (ralf@gnu.org)
* Copyright (C) 1999, 2000, 01, 2002 Silicon Graphics, Inc.
* Copyright (C) 2002 Broadcom, Inc.
* memcpy/copy_user author: Mark Vandevoorde
* Copyright (C) 2007 Maciej W. Rozycki
*
* Mnemonic names for arguments to memcpy/__copy_user
*/
/*
* Hack to resolve longstanding prefetch issue
*
* Prefetching may be fatal on some systems if we're prefetching beyond the
* end of memory on some systems. It's also a seriously bad idea on non
* dma-coherent systems.
*/
#if !defined(CONFIG_DMA_COHERENT) || !defined(CONFIG_DMA_IP27)
#undef CONFIG_CPU_HAS_PREFETCH
#endif
#ifdef CONFIG_MIPS_MALTA
#undef CONFIG_CPU_HAS_PREFETCH
#endif
#include <asm/asm.h>
#include <asm/asm-offsets.h>
#include <asm/regdef.h>
#define dst a0
#define src a1
#define len a2
/*
* Spec
*
* memcpy copies len bytes from src to dst and sets v0 to dst.
* It assumes that
* - src and dst don't overlap
* - src is readable
* - dst is writable
* memcpy uses the standard calling convention
*
* __copy_user copies up to len bytes from src to dst and sets a2 (len) to
* the number of uncopied bytes due to an exception caused by a read or write.
* __copy_user assumes that src and dst don't overlap, and that the call is
* implementing one of the following:
* copy_to_user
* - src is readable (no exceptions when reading src)
* copy_from_user
* - dst is writable (no exceptions when writing dst)
* __copy_user uses a non-standard calling convention; see
* include/asm-mips/uaccess.h
*
* When an exception happens on a load, the handler must
# ensure that all of the destination buffer is overwritten to prevent
* leaking information to user mode programs.
*/
/*
* Implementation
*/
/*
* The exception handler for loads requires that:
* 1- AT contain the address of the byte just past the end of the source
* of the copy,
* 2- src_entry <= src < AT, and
* 3- (dst - src) == (dst_entry - src_entry),
* The _entry suffix denotes values when __copy_user was called.
*
* (1) is set up up by uaccess.h and maintained by not writing AT in copy_user
* (2) is met by incrementing src by the number of bytes copied
* (3) is met by not doing loads between a pair of increments of dst and src
*
* The exception handlers for stores adjust len (if necessary) and return.
* These handlers do not need to overwrite any data.
*
* For __rmemcpy and memmove an exception is always a kernel bug, therefore
* they're not protected.
*/
#define EXC(inst_reg,addr,handler) \
9: inst_reg, addr; \
.section __ex_table,"a"; \
PTR 9b, handler; \
.previous
/*
* Only on the 64-bit kernel we can made use of 64-bit registers.
*/
#ifdef CONFIG_64BIT
#define USE_DOUBLE
#endif
#ifdef USE_DOUBLE
#define LOAD ld
#define LOADL ldl
#define LOADR ldr
#define STOREL sdl
#define STORER sdr
#define STORE sd
#define ADD daddu
#define SUB dsubu
#define SRL dsrl
#define SRA dsra
#define SLL dsll
#define SLLV dsllv
#define SRLV dsrlv
#define NBYTES 8
#define LOG_NBYTES 3
/*
* As we are sharing code base with the mips32 tree (which use the o32 ABI
* register definitions). We need to redefine the register definitions from
* the n64 ABI register naming to the o32 ABI register naming.
*/
#undef t0
#undef t1
#undef t2
#undef t3
#define t0 $8
#define t1 $9
#define t2 $10
#define t3 $11
#define t4 $12
#define t5 $13
#define t6 $14
#define t7 $15
#else
#define LOAD lw
#define LOADL lwl
#define LOADR lwr
#define STOREL swl
#define STORER swr
#define STORE sw
#define ADD addu
#define SUB subu
#define SRL srl
#define SLL sll
#define SRA sra
#define SLLV sllv
#define SRLV srlv
#define NBYTES 4
#define LOG_NBYTES 2
#endif /* USE_DOUBLE */
#ifdef CONFIG_CPU_LITTLE_ENDIAN
#define LDFIRST LOADR
#define LDREST LOADL
#define STFIRST STORER
#define STREST STOREL
#define SHIFT_DISCARD SLLV
#else
#define LDFIRST LOADL
#define LDREST LOADR
#define STFIRST STOREL
#define STREST STORER
#define SHIFT_DISCARD SRLV
#endif
#define FIRST(unit) ((unit)*NBYTES)
#define REST(unit) (FIRST(unit)+NBYTES-1)
#define UNIT(unit) FIRST(unit)
#define ADDRMASK (NBYTES-1)
.text
.set noreorder
#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
.set noat
#else
.set at=v1
#endif
/*
* A combined memcpy/__copy_user
* __copy_user sets len to 0 for success; else to an upper bound of
* the number of uncopied bytes.
* memcpy sets v0 to dst.
*/
.align 5
LEAF(__copy_user_inatomic)
/*
* Note: dst & src may be unaligned, len may be 0
* Temps
*/
#define rem t8
/*
* The "issue break"s below are very approximate.
* Issue delays for dcache fills will perturb the schedule, as will
* load queue full replay traps, etc.
*
* If len < NBYTES use byte operations.
*/
PREF( 0, 0(src) )
PREF( 1, 0(dst) )
sltu t2, len, NBYTES
and t1, dst, ADDRMASK
PREF( 0, 1*32(src) )
PREF( 1, 1*32(dst) )
bnez t2, copy_bytes_checklen
and t0, src, ADDRMASK
PREF( 0, 2*32(src) )
PREF( 1, 2*32(dst) )
bnez t1, dst_unaligned
nop
bnez t0, src_unaligned_dst_aligned
/*
* use delay slot for fall-through
* src and dst are aligned; need to compute rem
*/
both_aligned:
SRL t0, len, LOG_NBYTES+3 # +3 for 8 units/iter
beqz t0, cleanup_both_aligned # len < 8*NBYTES
and rem, len, (8*NBYTES-1) # rem = len % (8*NBYTES)
PREF( 0, 3*32(src) )
PREF( 1, 3*32(dst) )
.align 4
1:
EXC( LOAD t0, UNIT(0)(src), l_exc)
EXC( LOAD t1, UNIT(1)(src), l_exc_copy)
EXC( LOAD t2, UNIT(2)(src), l_exc_copy)
EXC( LOAD t3, UNIT(3)(src), l_exc_copy)
SUB len, len, 8*NBYTES
EXC( LOAD t4, UNIT(4)(src), l_exc_copy)
EXC( LOAD t7, UNIT(5)(src), l_exc_copy)
STORE t0, UNIT(0)(dst)
STORE t1, UNIT(1)(dst)
EXC( LOAD t0, UNIT(6)(src), l_exc_copy)
EXC( LOAD t1, UNIT(7)(src), l_exc_copy)
ADD src, src, 8*NBYTES
ADD dst, dst, 8*NBYTES
STORE t2, UNIT(-6)(dst)
STORE t3, UNIT(-5)(dst)
STORE t4, UNIT(-4)(dst)
STORE t7, UNIT(-3)(dst)
STORE t0, UNIT(-2)(dst)
STORE t1, UNIT(-1)(dst)
PREF( 0, 8*32(src) )
PREF( 1, 8*32(dst) )
bne len, rem, 1b
nop
/*
* len == rem == the number of bytes left to copy < 8*NBYTES
*/
cleanup_both_aligned:
beqz len, done
sltu t0, len, 4*NBYTES
bnez t0, less_than_4units
and rem, len, (NBYTES-1) # rem = len % NBYTES
/*
* len >= 4*NBYTES
*/
EXC( LOAD t0, UNIT(0)(src), l_exc)
EXC( LOAD t1, UNIT(1)(src), l_exc_copy)
EXC( LOAD t2, UNIT(2)(src), l_exc_copy)
EXC( LOAD t3, UNIT(3)(src), l_exc_copy)
SUB len, len, 4*NBYTES
ADD src, src, 4*NBYTES
STORE t0, UNIT(0)(dst)
STORE t1, UNIT(1)(dst)
STORE t2, UNIT(2)(dst)
STORE t3, UNIT(3)(dst)
.set reorder /* DADDI_WAR */
ADD dst, dst, 4*NBYTES
beqz len, done
.set noreorder
less_than_4units:
/*
* rem = len % NBYTES
*/
beq rem, len, copy_bytes
nop
1:
EXC( LOAD t0, 0(src), l_exc)
ADD src, src, NBYTES
SUB len, len, NBYTES
STORE t0, 0(dst)
.set reorder /* DADDI_WAR */
ADD dst, dst, NBYTES
bne rem, len, 1b
.set noreorder
/*
* src and dst are aligned, need to copy rem bytes (rem < NBYTES)
* A loop would do only a byte at a time with possible branch
* mispredicts. Can't do an explicit LOAD dst,mask,or,STORE
* because can't assume read-access to dst. Instead, use
* STREST dst, which doesn't require read access to dst.
*
* This code should perform better than a simple loop on modern,
* wide-issue mips processors because the code has fewer branches and
* more instruction-level parallelism.
*/
#define bits t2
beqz len, done
ADD t1, dst, len # t1 is just past last byte of dst
li bits, 8*NBYTES
SLL rem, len, 3 # rem = number of bits to keep
EXC( LOAD t0, 0(src), l_exc)
SUB bits, bits, rem # bits = number of bits to discard
SHIFT_DISCARD t0, t0, bits
STREST t0, -1(t1)
jr ra
move len, zero
dst_unaligned:
/*
* dst is unaligned
* t0 = src & ADDRMASK
* t1 = dst & ADDRMASK; T1 > 0
* len >= NBYTES
*
* Copy enough bytes to align dst
* Set match = (src and dst have same alignment)
*/
#define match rem
EXC( LDFIRST t3, FIRST(0)(src), l_exc)
ADD t2, zero, NBYTES
EXC( LDREST t3, REST(0)(src), l_exc_copy)
SUB t2, t2, t1 # t2 = number of bytes copied
xor match, t0, t1
STFIRST t3, FIRST(0)(dst)
beq len, t2, done
SUB len, len, t2
ADD dst, dst, t2
beqz match, both_aligned
ADD src, src, t2
src_unaligned_dst_aligned:
SRL t0, len, LOG_NBYTES+2 # +2 for 4 units/iter
PREF( 0, 3*32(src) )
beqz t0, cleanup_src_unaligned
and rem, len, (4*NBYTES-1) # rem = len % 4*NBYTES
PREF( 1, 3*32(dst) )
1:
/*
* Avoid consecutive LD*'s to the same register since some mips
* implementations can't issue them in the same cycle.
* It's OK to load FIRST(N+1) before REST(N) because the two addresses
* are to the same unit (unless src is aligned, but it's not).
*/
EXC( LDFIRST t0, FIRST(0)(src), l_exc)
EXC( LDFIRST t1, FIRST(1)(src), l_exc_copy)
SUB len, len, 4*NBYTES
EXC( LDREST t0, REST(0)(src), l_exc_copy)
EXC( LDREST t1, REST(1)(src), l_exc_copy)
EXC( LDFIRST t2, FIRST(2)(src), l_exc_copy)
EXC( LDFIRST t3, FIRST(3)(src), l_exc_copy)
EXC( LDREST t2, REST(2)(src), l_exc_copy)
EXC( LDREST t3, REST(3)(src), l_exc_copy)
PREF( 0, 9*32(src) ) # 0 is PREF_LOAD (not streamed)
ADD src, src, 4*NBYTES
#ifdef CONFIG_CPU_SB1
nop # improves slotting
#endif
STORE t0, UNIT(0)(dst)
STORE t1, UNIT(1)(dst)
STORE t2, UNIT(2)(dst)
STORE t3, UNIT(3)(dst)
PREF( 1, 9*32(dst) ) # 1 is PREF_STORE (not streamed)
.set reorder /* DADDI_WAR */
ADD dst, dst, 4*NBYTES
bne len, rem, 1b
.set noreorder
cleanup_src_unaligned:
beqz len, done
and rem, len, NBYTES-1 # rem = len % NBYTES
beq rem, len, copy_bytes
nop
1:
EXC( LDFIRST t0, FIRST(0)(src), l_exc)
EXC( LDREST t0, REST(0)(src), l_exc_copy)
ADD src, src, NBYTES
SUB len, len, NBYTES
STORE t0, 0(dst)
.set reorder /* DADDI_WAR */
ADD dst, dst, NBYTES
bne len, rem, 1b
.set noreorder
copy_bytes_checklen:
beqz len, done
nop
copy_bytes:
/* 0 < len < NBYTES */
#define COPY_BYTE(N) \
EXC( lb t0, N(src), l_exc); \
SUB len, len, 1; \
beqz len, done; \
sb t0, N(dst)
COPY_BYTE(0)
COPY_BYTE(1)
#ifdef USE_DOUBLE
COPY_BYTE(2)
COPY_BYTE(3)
COPY_BYTE(4)
COPY_BYTE(5)
#endif
EXC( lb t0, NBYTES-2(src), l_exc)
SUB len, len, 1
jr ra
sb t0, NBYTES-2(dst)
done:
jr ra
nop
END(__copy_user_inatomic)
l_exc_copy:
/*
* Copy bytes from src until faulting load address (or until a
* lb faults)
*
* When reached by a faulting LDFIRST/LDREST, THREAD_BUADDR($28)
* may be more than a byte beyond the last address.
* Hence, the lb below may get an exception.
*
* Assumes src < THREAD_BUADDR($28)
*/
LOAD t0, TI_TASK($28)
nop
LOAD t0, THREAD_BUADDR(t0)
1:
EXC( lb t1, 0(src), l_exc)
ADD src, src, 1
sb t1, 0(dst) # can't fault -- we're copy_from_user
.set reorder /* DADDI_WAR */
ADD dst, dst, 1
bne src, t0, 1b
.set noreorder
l_exc:
LOAD t0, TI_TASK($28)
nop
LOAD t0, THREAD_BUADDR(t0) # t0 is just past last good address
nop
SUB len, AT, t0 # len number of uncopied bytes
jr ra
nop
