/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1992 Ross Biro
* Copyright (C) Linus Torvalds
* Copyright (C) 1994, 95, 96, 97, 98, 2000 Ralf Baechle
* Copyright (C) 1996 David S. Miller
* Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
* Copyright (C) 1999 MIPS Technologies, Inc.
* Copyright (C) 2000 Ulf Carlsson
*
* At this time Linux/MIPS64 only supports syscall tracing, even for 32-bit
* binaries.
*/
#include <linux/compiler.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <linux/smp.h>
#include <linux/user.h>
#include <linux/security.h>
#include <linux/audit.h>
#include <linux/seccomp.h>
#include <asm/byteorder.h>
#include <asm/cpu.h>
#include <asm/dsp.h>
#include <asm/fpu.h>
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/system.h>
#include <asm/uaccess.h>
#include <asm/bootinfo.h>
#include <asm/reg.h>
/*
* Called by kernel/ptrace.c when detaching..
*
* Make sure single step bits etc are not set.
*/
void ptrace_disable(struct task_struct *child)
{
/* Nothing to do.. */
}
/*
* Read a general register set. We always use the 64-bit format, even
* for 32-bit kernels and for 32-bit processes on a 64-bit kernel.
* Registers are sign extended to fill the available space.
*/
int ptrace_getregs (struct task_struct *child, __s64 __user *data)
{
struct pt_regs *regs;
int i;
if (!access_ok(VERIFY_WRITE, data, 38 * 8))
return -EIO;
regs = task_pt_regs(child);
for (i = 0; i < 32; i++)
__put_user (regs->regs[i], data + i);
__put_user (regs->lo, data + EF_LO - EF_R0);
__put_user (regs->hi, data + EF_HI - EF_R0);
__put_user (regs->cp0_epc, data + EF_CP0_EPC - EF_R0);
__put_user (regs->cp0_badvaddr, data + EF_CP0_BADVADDR - EF_R0);
__put_user (regs->cp0_status, data + EF_CP0_STATUS - EF_R0);
__put_user (regs->cp0_cause, data + EF_CP0_CAUSE - EF_R0);
return 0;
}
/*
* Write a general register set. As for PTRACE_GETREGS, we always use
* the 64-bit format. On a 32-bit kernel only the lower order half
* (according to endianness) will be used.
*/
int ptrace_setregs (struct task_struct *child, __s64 __user *data)
{
struct pt_regs *regs;
int i;
if (!access_ok(VERIFY_READ, data, 38 * 8))
return -EIO;
regs = task_pt_regs(child);
for (i = 0; i < 32; i++)
__get_user (regs->regs[i], data + i);
__get_user (regs->lo, data + EF_LO - EF_R0);
__get_user (regs->hi, data + EF_HI - EF_R0);
__get_user (regs->cp0_epc, data + EF_CP0_EPC - EF_R0);
/* badvaddr, status, and cause may not be written. */
return 0;
}
int ptrace_getfpregs (struct task_struct *child, __u32 __user *data)
{
int i;
unsigned int tmp;
if (!access_ok(VERIFY_WRITE, data, 33 * 8))
return -EIO;
if (tsk_used_math(child)) {
fpureg_t *fregs = get_fpu_regs(child);
for (i = 0; i < 32; i++)
__put_user (fregs[i], i + (__u64 __user *) data);
} else {
for (i = 0; i < 32; i++)
__put_user ((__u64) -1, i + (__u64 __user *) data);
}
__put_user (child->thread.fpu.fcr31, data + 64);
preempt_disable();
if (cpu_has_fpu) {
unsigned int flags;
if (cpu_has_mipsmt) {
unsigned int vpflags = dvpe();
flags = read_c0_status();
__enable_fpu();
__asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp));
write_c0_status(flags);
evpe(vpflags);
} else {
flags = read_c0_status();
__enable_fpu();
__asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp));
write_c0_status(flags);
}
} else {
tmp = 0;
}
preempt_enable();
__put_user (tmp, data + 65);
return 0;
}
int ptrace_setfpregs (struct task_struct *child, __u32 __user *data)
{
fpureg_t *fregs;
int i;
if (!access_ok(VERIFY_READ, data, 33 * 8))
return -EIO;
fregs = get_fpu_regs(child);
for (i = 0; i < 32; i++)
__get_user (fregs[i], i + (__u64 __user *) data);
__get_user (child->thread.fpu.fcr31, data + 64);
/* FIR may not be written. */
return 0;
}
long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
int ret;
switch (request) {
/* when I and D space are separate, these will need to be fixed. */
case PTRACE_PEEKTEXT: /* read word at location addr. */
case PTRACE_PEEKDATA:
ret = generic_ptrace_peekdata(child, addr, data);
break;
/* Read the word at location addr in the USER area. */
case PTRACE_PEEKUSR: {
struct pt_regs *regs;
unsigned long tmp = 0;
regs = task_pt_regs(child);
ret = 0; /* Default return value. */
switch (addr) {
case 0 ... 31:
tmp = regs->regs[addr];
break;
case FPR_BASE ... FPR_BASE + 31:
if (tsk_used_math(child)) {
fpureg_t *fregs = get_fpu_regs(child);
#ifdef CONFIG_32BIT
/*
* The odd registers are actually the high
* order bits of the values stored in the even
* registers - unless we're using r2k_switch.S.
*/
if (addr & 1)
tmp = (unsigned long) (fregs[((addr & ~1) - 32)] >> 32);
else
tmp = (unsigned long) (fregs[(addr - 32)] & 0xffffffff);
#endif
#ifdef CONFIG_64BIT
tmp = fregs[addr - FPR_BASE];
#endif
} else {
tmp = -1; /* FP not yet used */
}
break;
case PC:
tmp = regs->cp0_epc;
break;
case CAUSE:
tmp = regs->cp0_cause;
break;
case BADVADDR:
tmp = regs->cp0_badvaddr;
break;
case MMHI:
tmp = regs->hi;
break;
case MMLO:
tmp = regs->lo;
break;
#ifdef CONFIG_CPU_HAS_SMARTMIPS
case ACX:
tmp = regs->acx;
break;
#endif
case FPC_CSR:
tmp = child->thread.fpu.fcr31;
break;
case FPC_EIR: { /* implementation / version register */
unsigned int flags;
#ifdef CONFIG_MIPS_MT_SMTC
unsigned int irqflags;
unsigned int mtflags;
#endif /* CONFIG_MIPS_MT_SMTC */
preempt_disable();
if (!cpu_has_fpu) {
preempt_enable();
break;
}
#ifdef CONFIG_MIPS_MT_SMTC
/* Read-modify-write of Status must be atomic */
local_irq_save(irqflags);
mtflags = dmt();
#endif /* CONFIG_MIPS_MT_SMTC */
if (cpu_has_mipsmt) {
unsigned int vpflags = dvpe();
flags = read_c0_status();
__enable_fpu();
__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
write_c0_status(flags);
evpe(vpflags);
} else {
flags = read_c0_status();
__enable_fpu();
__asm__ __volatile__("cfc1\t%0,$0": "=r" (tmp));
write_c0_status(flags);
}
#ifdef CONFIG_MIPS_MT_SMTC
emt(mtflags);
local_irq_restore(irqflags);
#endif /* CONFIG_MIPS_MT_SMTC */
preempt_enable();
break;
}
case DSP_BASE ... DSP_BASE + 5: {
dspreg_t *dregs;
if (!cpu_has_dsp) {
tmp = 0;
ret = -EIO;
goto out;
}
dregs = __get_dsp_regs(child);
tmp = (unsigned long) (dregs[addr - DSP_BASE]);
break;
}
case DSP_CONTROL:
if (!cpu_has_dsp) {
tmp = 0;
ret = -EIO;
goto out;
}
tmp = child->thread.dsp.dspcontrol;
break;
default:
tmp = 0;
ret = -EIO;
goto out;
}
ret = put_user(tmp, (unsigned long __user *) data);
break;
}
/* when I and D space are separate, this will have to be fixed. */
case PTRACE_POKETEXT: /* write the word at location addr. */
case PTRACE_POKEDATA:
ret = generic_ptrace_pokedata(child, addr, data);
break;
case PTRACE_POKEUSR: {
struct pt_regs *regs;
ret = 0;
regs = task_pt_regs(child);
switch (addr) {
case 0 ... 31:
regs->regs[addr] = data;
break;
case FPR_BASE ... FPR_BASE + 31: {
fpureg_t *fregs = get_fpu_regs(child);
if (!tsk_used_math(child)) {
/* FP not yet used */
memset(&child->thread.fpu, ~0,
sizeof(child->thread.fpu));
child->thread.fpu.fcr31 = 0;
}
#ifdef CONFIG_32BIT
/*
* The odd registers are actually the high order bits
* of the values stored in the even registers - unless
* we're using r2k_switch.S.
*/
if (addr & 1) {
fregs[(addr & ~1) - FPR_BASE] &= 0xffffffff;
fregs[(addr & ~1) - FPR_BASE] |= ((unsigned long long) data) << 32;
} else {
fregs[addr - FPR_BASE] &= ~0xffffffffLL;
fregs[addr - FPR_BASE] |= data;
}
#endif
#ifdef CONFIG_64BIT
fregs[addr - FPR_BASE] = data;
#endif
break;
}
case PC:
regs->cp0_epc = data;
break;
case MMHI:
regs->hi = data;
break;
case MMLO:
regs->lo = data;
break;
#ifdef CONFIG_CPU_HAS_SMARTMIPS
case ACX:
regs->acx = data;
break;
#endif
case FPC_CSR:
child->thread.fpu.fcr31 = data;
break;
case DSP_BASE ... DSP_BASE + 5: {
dspreg_t *dregs;
if (!cpu_has_dsp) {
ret = -EIO;
break;
}
dregs = __get_dsp_regs(child);
dregs[addr - DSP_BASE] = data;
break;
}
case DSP_CONTROL:
if (!cpu_has_dsp) {
ret = -EIO;
break;
}
child->thread.dsp.dspcontrol = data;
break;
default:
/* The rest are not allowed. */
ret = -EIO;
break;
}
break;
}
case PTRACE_GETREGS:
ret = ptrace_getregs (child, (__u64 __user *) data);
break;
case PTRACE_SETREGS:
ret = ptrace_setregs (child, (__u64 __user *) data);
break;
case PTRACE_GETFPREGS:
ret = ptrace_getfpregs (child, (__u32 __user *) data);
break;
case PTRACE_SETFPREGS:
ret = ptrace_setfpregs (child, (__u32 __user *) data);
break;
case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
case PTRACE_CONT: { /* restart after signal. */
ret = -EIO;
if (!valid_signal(data))
break;
if (request == PTRACE_SYSCALL) {
set_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
}
else {
clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
}
child->exit_code = data;
wake_up_process(child);
ret = 0;
break;
}
/*
* make the child exit. Best I can do is send it a sigkill.
* perhaps it should be put in the status that it wants to
* exit.
*/
case PTRACE_KILL:
ret = 0;
if (child->exit_state == EXIT_ZOMBIE) /* already dead */
break;
child->exit_code = SIGKILL;
wake_up_process(child);
break;
case PTRACE_DETACH: /* detach a process that was attached. */
ret = ptrace_detach(child, data);
break;
case PTRACE_GET_THREAD_AREA:
ret = put_user(task_thread_info(child)->tp_value,
(unsigned long __user *) data);
break;
default:
ret = ptrace_request(child, request, addr, data);
break;
}
out:
return ret;
}
static inline int audit_arch(void)
{
int arch = EM_MIPS;
#ifdef CONFIG_64BIT
arch |= __AUDIT_ARCH_64BIT;
#endif
#if defined(__LITTLE_ENDIAN)
arch |= __AUDIT_ARCH_LE;
#endif
return arch;
}
/*
* Notification of system call entry/exit
* - triggered by current->work.syscall_trace
*/
asmlinkage void do_syscall_trace(struct pt_regs *regs, int entryexit)
{
/* do the secure computing check first */
if (!entryexit)
secure_computing(regs->regs[0]);
if (unlikely(current->audit_context) && entryexit)
audit_syscall_exit(AUDITSC_RESULT(regs->regs[2]),
regs->regs[2]);
if (!(current->ptrace & PT_PTRACED))
goto out;
if (!test_thread_flag(TIF_SYSCALL_TRACE))
goto out;
/* The 0x80 provides a way for the tracing parent to distinguish
between a syscall stop and SIGTRAP delivery */
ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) ?
0x80 : 0));
/*
* this isn't the same as continuing with a signal, but it will do
* for normal use. strace only continues with a signal if the
* stopping signal is not SIGTRAP. -brl
*/
if (current->exit_code) {
send_sig(current->exit_code, current, 1);
current->exit_code = 0;
}
out:
if (unlikely(current->audit_context) && !entryexit)
audit_syscall_entry(audit_arch(), regs->regs[0],
regs->regs[4], regs->regs[5],
regs->regs[6], regs->regs[7]);
}
