/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2007 MIPS Technologies, Inc.
* Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org>
*/
#include <linux/clockchips.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <asm/smtc_ipi.h>
#include <asm/time.h>
static int mips_next_event(unsigned long delta,
struct clock_event_device *evt)
{
unsigned int cnt;
int res;
#ifdef CONFIG_MIPS_MT_SMTC
{
unsigned long flags, vpflags;
local_irq_save(flags);
vpflags = dvpe();
#endif
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
res = ((long)(read_c0_count() - cnt ) > 0) ? -ETIME : 0;
#ifdef CONFIG_MIPS_MT_SMTC
evpe(vpflags);
local_irq_restore(flags);
}
#endif
return res;
}
static void mips_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
/* Nothing to do ... */
}
static DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device);
static int cp0_timer_irq_installed;
/*
* Timer ack for an R4k-compatible timer of a known frequency.
*/
static void c0_timer_ack(void)
{
write_c0_compare(read_c0_compare());
}
/*
* Possibly handle a performance counter interrupt.
* Return true if the timer interrupt should not be checked
*/
static inline int handle_perf_irq(int r2)
{
/*
* The performance counter overflow interrupt may be shared with the
* timer interrupt (cp0_perfcount_irq < 0). If it is and a
* performance counter has overflowed (perf_irq() == IRQ_HANDLED)
* and we can't reliably determine if a counter interrupt has also
* happened (!r2) then don't check for a timer interrupt.
*/
return (cp0_perfcount_irq < 0) &&
perf_irq() == IRQ_HANDLED &&
!r2;
}
static irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
{
const int r2 = cpu_has_mips_r2;
struct clock_event_device *cd;
int cpu = smp_processor_id();
/*
* Suckage alert:
* Before R2 of the architecture there was no way to see if a
* performance counter interrupt was pending, so we have to run
* the performance counter interrupt handler anyway.
*/
if (handle_perf_irq(r2))
goto out;
/*
* The same applies to performance counter interrupts. But with the
* above we now know that the reason we got here must be a timer
* interrupt. Being the paranoiacs we are we check anyway.
*/
if (!r2 || (read_c0_cause() & (1 << 30))) {
c0_timer_ack();
#ifdef CONFIG_MIPS_MT_SMTC
if (cpu_data[cpu].vpe_id)
goto out;
cpu = 0;
#endif
cd = &per_cpu(mips_clockevent_device, cpu);
cd->event_handler(cd);
}
out:
return IRQ_HANDLED;
}
static struct irqaction c0_compare_irqaction = {
.handler = c0_compare_interrupt,
#ifdef CONFIG_MIPS_MT_SMTC
.flags = IRQF_DISABLED,
#else
.flags = IRQF_DISABLED | IRQF_PERCPU,
#endif
.name = "timer",
};
#ifdef CONFIG_MIPS_MT_SMTC
DEFINE_PER_CPU(struct clock_event_device, smtc_dummy_clockevent_device);
static void smtc_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
}
static void mips_broadcast(cpumask_t mask)
{
unsigned int cpu;
for_each_cpu_mask(cpu, mask)
smtc_send_ipi(cpu, SMTC_CLOCK_TICK, 0);
}
static void setup_smtc_dummy_clockevent_device(void)
{
//uint64_t mips_freq = mips_hpt_^frequency;
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd;
cd = &per_cpu(smtc_dummy_clockevent_device, cpu);
cd->name = "SMTC";
cd->features = CLOCK_EVT_FEAT_DUMMY;
/* Calculate the min / max delta */
cd->mult = 0; //div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
cd->shift = 0; //32;
cd->max_delta_ns = 0; //clockevent_delta2ns(0x7fffffff, cd);
cd->min_delta_ns = 0; //clockevent_delta2ns(0x30, cd);
cd->rating = 200;
cd->irq = 17; //-1;
// if (cpu)
// cd->cpumask = CPU_MASK_ALL; // cpumask_of_cpu(cpu);
// else
cd->cpumask = cpumask_of_cpu(cpu);
cd->set_mode = smtc_set_mode;
cd->broadcast = mips_broadcast;
clockevents_register_device(cd);
}
#endif
static void mips_event_handler(struct clock_event_device *dev)
{
}
/*
* FIXME: This doesn't hold for the relocated E9000 compare interrupt.
*/
static int c0_compare_int_pending(void)
{
return (read_c0_cause() >> cp0_compare_irq) & 0x100;
}
static int c0_compare_int_usable(void)
{
const unsigned int delta = 0x300000;
unsigned int cnt;
/*
* IP7 already pending? Try to clear it by acking the timer.
*/
if (c0_compare_int_pending()) {
write_c0_compare(read_c0_compare());
irq_disable_hazard();
if (c0_compare_int_pending())
return 0;
}
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
while ((long)(read_c0_count() - cnt) <= 0)
; /* Wait for expiry */
if (!c0_compare_int_pending())
return 0;
write_c0_compare(read_c0_compare());
irq_disable_hazard();
if (c0_compare_int_pending())
return 0;
/*
* Feels like a real count / compare timer.
*/
return 1;
}
void __cpuinit mips_clockevent_init(void)
{
uint64_t mips_freq = mips_hpt_frequency;
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd;
unsigned int irq = MIPS_CPU_IRQ_BASE + 7;
if (!cpu_has_counter)
return;
#ifdef CONFIG_MIPS_MT_SMTC
setup_smtc_dummy_clockevent_device();
/*
* On SMTC we only register VPE0's compare interrupt as clockevent
* device.
*/
if (cpu)
return;
#endif
if (!c0_compare_int_usable())
return;
cd = &per_cpu(mips_clockevent_device, cpu);
cd->name = "MIPS";
cd->features = CLOCK_EVT_FEAT_ONESHOT;
/* Calculate the min / max delta */
cd->mult = div_sc((unsigned long) mips_freq, NSEC_PER_SEC, 32);
cd->shift = 32;
cd->max_delta_ns = clockevent_delta2ns(0x7fffffff, cd);
cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
cd->rating = 300;
cd->irq = irq;
#ifdef CONFIG_MIPS_MT_SMTC
cd->cpumask = CPU_MASK_ALL;
#else
cd->cpumask = cpumask_of_cpu(cpu);
#endif
cd->set_next_event = mips_next_event;
cd->set_mode = mips_set_mode;
cd->event_handler = mips_event_handler;
clockevents_register_device(cd);
if (!cp0_timer_irq_installed) {
#ifdef CONFIG_MIPS_MT_SMTC
#define CPUCTR_IMASKBIT (0x100 << cp0_compare_irq)
setup_irq_smtc(irq, &c0_compare_irqaction, CPUCTR_IMASKBIT);
#else
setup_irq(irq, &c0_compare_irqaction);
#endif /* CONFIG_MIPS_MT_SMTC */
cp0_timer_irq_installed = 1;
}
}
