/*
* Bus error event handling code for 5000-series systems equipped
* with parity error detection logic, i.e. DECstation/DECsystem
* 5000/120, /125, /133 (KN02-BA), 5000/150 (KN04-BA) and Personal
* DECstation/DECsystem 5000/20, /25, /33 (KN02-CA), 5000/50
* (KN04-CA) systems.
*
* Copyright (c) 2005 Maciej W. Rozycki
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <asm/addrspace.h>
#include <asm/irq_regs.h>
#include <asm/ptrace.h>
#include <asm/traps.h>
#include <asm/dec/kn02ca.h>
#include <asm/dec/kn02xa.h>
#include <asm/dec/kn05.h>
static inline void dec_kn02xa_be_ack(void)
{
volatile u32 *mer = (void *)CKSEG1ADDR(KN02XA_MER);
volatile u32 *mem_intr = (void *)CKSEG1ADDR(KN02XA_MEM_INTR);
*mer = KN02CA_MER_INTR; /* Clear errors; keep the ARC IRQ. */
*mem_intr = 0; /* Any write clears the bus IRQ. */
iob();
}
static int dec_kn02xa_be_backend(struct pt_regs *regs, int is_fixup,
int invoker)
{
volatile u32 *kn02xa_mer = (void *)CKSEG1ADDR(KN02XA_MER);
volatile u32 *kn02xa_ear = (void *)CKSEG1ADDR(KN02XA_EAR);
static const char excstr[] = "exception";
static const char intstr[] = "interrupt";
static const char cpustr[] = "CPU";
static const char mreadstr[] = "memory read";
static const char readstr[] = "read";
static const char writestr[] = "write";
static const char timestr[] = "timeout";
static const char paritystr[] = "parity error";
static const char lanestat[][4] = { " OK", "BAD" };
const char *kind, *agent, *cycle, *event;
unsigned long address;
u32 mer = *kn02xa_mer;
u32 ear = *kn02xa_ear;
int action = MIPS_BE_FATAL;
/* Ack ASAP, so that any subsequent errors get caught. */
dec_kn02xa_be_ack();
kind = invoker ? intstr : excstr;
/* No DMA errors? */
agent = cpustr;
address = ear & KN02XA_EAR_ADDRESS;
/* Low 256MB is decoded as memory, high -- as TC. */
if (address < 0x10000000) {
cycle = mreadstr;
event = paritystr;
} else {
cycle = invoker ? writestr : readstr;
event = timestr;
}
if (is_fixup)
action = MIPS_BE_FIXUP;
if (action != MIPS_BE_FIXUP)
printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n",
kind, agent, cycle, event, address);
if (action != MIPS_BE_FIXUP && address < 0x10000000)
printk(KERN_ALERT " Byte lane status %#3x -- "
"#3: %s, #2: %s, #1: %s, #0: %s\n",
(mer & KN02XA_MER_BYTERR) >> 8,
lanestat[(mer & KN02XA_MER_BYTERR_3) != 0],
lanestat[(mer & KN02XA_MER_BYTERR_2) != 0],
lanestat[(mer & KN02XA_MER_BYTERR_1) != 0],
lanestat[(mer & KN02XA_MER_BYTERR_0) != 0]);
return action;
}
int dec_kn02xa_be_handler(struct pt_regs *regs, int is_fixup)
{
return dec_kn02xa_be_backend(regs, is_fixup, 0);
}
irqreturn_t dec_kn02xa_be_interrupt(int irq, void *dev_id)
{
struct pt_regs *regs = get_irq_regs();
int action = dec_kn02xa_be_backend(regs, 0, 1);
if (action == MIPS_BE_DISCARD)
return IRQ_HANDLED;
/*
* FIXME: Find the affected processes and kill them, otherwise
* we must die.
*
* The interrupt is asynchronously delivered thus EPC and RA
* may be irrelevant, but are printed for a reference.
*/
printk(KERN_ALERT "Fatal bus interrupt, epc == %08lx, ra == %08lx\n",
regs->cp0_epc, regs->regs[31]);
die("Unrecoverable bus error", regs);
}
void __init dec_kn02xa_be_init(void)
{
volatile u32 *mbcs = (void *)CKSEG1ADDR(KN4K_SLOT_BASE + KN4K_MB_CSR);
/* For KN04 we need to make sure EE (?) is enabled in the MB. */
if (current_cpu_type() == CPU_R4000SC)
*mbcs |= KN4K_MB_CSR_EE;
fast_iob();
/* Clear any leftover errors from the firmware. */
dec_kn02xa_be_ack();
}
