#
# This file is subject to the terms and conditions of the GNU General Public
# License. See the file "COPYING" in the main directory of this archive
# for more details.
#
# Copyright (C) 1994, 95, 96, 2003 by Ralf Baechle
# DECStation modifications by Paul M. Antoine, 1996
# Copyright (C) 2002, 2003, 2004 Maciej W. Rozycki
#
# This file is included by the global makefile so that you can add your own
# architecture-specific flags and dependencies. Remember to do have actions
# for "archclean" cleaning up for this architecture.
#
KBUILD_DEFCONFIG := ip22_defconfig
#
# Select the object file format to substitute into the linker script.
#
ifdef CONFIG_CPU_LITTLE_ENDIAN
32bit-tool-archpref = mipsel
64bit-tool-archpref = mips64el
32bit-bfd = elf32-tradlittlemips
64bit-bfd = elf64-tradlittlemips
32bit-emul = elf32ltsmip
64bit-emul = elf64ltsmip
else
32bit-tool-archpref = mips
64bit-tool-archpref = mips64
32bit-bfd = elf32-tradbigmips
64bit-bfd = elf64-tradbigmips
32bit-emul = elf32btsmip
64bit-emul = elf64btsmip
endif
ifdef CONFIG_32BIT
tool-archpref = $(32bit-tool-archpref)
UTS_MACHINE := mips
endif
ifdef CONFIG_64BIT
tool-archpref = $(64bit-tool-archpref)
UTS_MACHINE := mips64
endif
ifneq ($(SUBARCH),$(ARCH))
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := $(call cc-cross-prefix, $(tool-archpref)-linux- $(tool-archpref)-linux-gnu- $(tool-archpref)-unknown-linux-gnu-)
endif
endif
ifdef CONFIG_FUNCTION_GRAPH_TRACER
ifndef KBUILD_MCOUNT_RA_ADDRESS
ifeq ($(call cc-option-yn,-mmcount-ra-address), y)
cflags-y += -mmcount-ra-address -DKBUILD_MCOUNT_RA_ADDRESS
endif
endif
endif
cflags-y += $(call cc-option, -mno-check-zero-division)
ifdef CONFIG_32BIT
ld-emul = $(32bit-emul)
vmlinux-32 = vmlinux
vmlinux-64 = vmlinux.64
cflags-y += -mabi=32
endif
ifdef CONFIG_64BIT
ld-emul = $(64bit-emul)
vmlinux-32 = vmlinux.32
vmlinux-64 = vmlinux
cflags-y += -mabi=64
endif
all-$(CONFIG_BOOT_ELF32) := $(vmlinux-32)
all-$(CONFIG_BOOT_ELF64) := $(vmlinux-64)
all-$(CONFIG_SYS_SUPPORTS_ZBOOT)+= vmlinuz
#
# GCC uses -G 0 -mabicalls -fpic as default. We don't want PIC in the kernel
# code since it only slows down the whole thing. At some point we might make
# use of global pointer optimizations but their use of $28 conflicts with
# the current pointer optimization.
#
# The DECStation requires an ECOFF kernel for remote booting, other MIPS
# machines may also. Since BFD is incredibly buggy with respect to
# crossformat linking we rely on the elf2ecoff tool for format conversion.
#
cflags-y += -G 0 -mno-abicalls -fno-pic -pipe
cflags-y += -msoft-float
LDFLAGS_vmlinux += -G 0 -static -n -nostdlib
KBUILD_AFLAGS_MODULE += -mlong-calls
KBUILD_CFLAGS_MODULE += -mlong-calls
#
# pass -msoft-float to GAS if it supports it. However on newer binutils
# (specifically newer than 2.24.51.20140728) we then also need to explicitly
# set ".set hardfloat" in all files which manipulate floating point registers.
#
ifneq ($(call as-option,-Wa$(comma)-msoft-float,),)
cflags-y += -DGAS_HAS_SET_HARDFLOAT -Wa,-msoft-float
endif
cflags-y += -ffreestanding
#
# We explicitly add the endianness specifier if needed, this allows
# to compile kernels with a toolchain for the other endianness. We
# carefully avoid to add it redundantly because gcc 3.3/3.4 complains
# when fed the toolchain default!
#
# Certain gcc versions up to gcc 4.1.1 (probably 4.2-subversion as of
# 2006-10-10 don't properly change the predefined symbols if -EB / -EL
# are used, so we kludge that here. A bug has been filed at
# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413.
#
undef-all += -UMIPSEB -U_MIPSEB -U__MIPSEB -U__MIPSEB__
undef-all += -UMIPSEL -U_MIPSEL -U__MIPSEL -U__MIPSEL__
predef-be += -DMIPSEB -D_MIPSEB -D__MIPSEB -D__MIPSEB__
predef-le += -DMIPSEL -D_MIPSEL -D__MIPSEL -D__MIPSEL__
cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB $(undef-all) $(predef-be))
cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL $(undef-all) $(predef-le))
cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \
-fno-omit-frame-pointer
#
# CPU-dependent compiler/assembler options for optimization.
#
cflags-$(CONFIG_CPU_R3000) += -march=r3000
cflags-$(CONFIG_CPU_TX39XX) += -march=r3900
cflags-$(CONFIG_CPU_R6000) += -march=r6000 -Wa,--trap
cflags-$(CONFIG_CPU_R4300) += -march=r4300 -Wa,--trap
cflags-$(CONFIG_CPU_VR41XX) += -march=r4100 -Wa,--trap
cflags-$(CONFIG_CPU_R4X00) += -march=r4600 -Wa,--trap
cflags-$(CONFIG_CPU_TX49XX) += -march=r4600 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS32_R1) += $(call cc-option,-march=mips32,-mips32 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
-Wa,-mips32 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS32_R2) += $(call cc-option,-march=mips32r2,-mips32r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS32) \
-Wa,-mips32r2 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS32_R6) += -march=mips32r6 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS64_R1) += $(call cc-option,-march=mips64,-mips64 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
-Wa,-mips64 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS64_R2) += $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
-Wa,-mips64r2 -Wa,--trap
cflags-$(CONFIG_CPU_MIPS64_R6) += -march=mips64r6 -Wa,--trap
cflags-$(CONFIG_CPU_R5000) += -march=r5000 -Wa,--trap
cflags-$(CONFIG_CPU_R5432) += $(call cc-option,-march=r5400,-march=r5000) \
-Wa,--trap
cflags-$(CONFIG_CPU_R5500) += $(call cc-option,-march=r5500,-march=r5000) \
-Wa,--trap
cflags-$(CONFIG_CPU_NEVADA) += $(call cc-option,-march=rm5200,-march=r5000) \
-Wa,--trap
cflags-$(CONFIG_CPU_RM7000) += $(call cc-option,-march=rm7000,-march=r5000) \
-Wa,--trap
cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-march=sb1,-march=r5000) \
-Wa,--trap
cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-mno-mdmx)
cflags-$(CONFIG_CPU_SB1) += $(call cc-option,-mno-mips3d)
cflags-$(CONFIG_CPU_R8000) += -march=r8000 -Wa,--trap
cflags-$(CONFIG_CPU_R10000) += $(call cc-option,-march=r10000,-march=r8000) \
-Wa,--trap
cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += $(call cc-option,-march=octeon) -Wa,--trap
ifeq (,$(findstring march=octeon, $(cflags-$(CONFIG_CPU_CAVIUM_OCTEON))))
cflags-$(CONFIG_CPU_CAVIUM_OCTEON) += -Wa,-march=octeon
endif
cflags-$(CONFIG_CAVIUM_CN63XXP1) += -Wa,-mfix-cn63xxp1
cflags-$(CONFIG_CPU_BMIPS) += -march=mips32 -Wa,-mips32 -Wa,--trap
#
# binutils from v2.25 on and gcc starting from v4.9.0 treat -march=loongson3a
# as MIPS64 R1; older versions as just R1. This leaves the possibility open
# that GCC might generate R2 code for -march=loongson3a which then is rejected
# by GAS. The cc-option can't probe for this behaviour so -march=loongson3a
# can't easily be used safely within the kbuild framework.
#
cflags-$(CONFIG_CPU_LOONGSON3) += \
$(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64) \
-Wa,-mips64r2 -Wa,--trap
cflags-$(CONFIG_CPU_R4000_WORKAROUNDS) += $(call cc-option,-mfix-r4000,)
cflags-$(CONFIG_CPU_R4400_WORKAROUNDS) += $(call cc-option,-mfix-r4400,)
cflags-$(CONFIG_CPU_DADDI_WORKAROUNDS) += $(call cc-option,-mno-daddi,)
ifdef CONFIG_CPU_SB1
ifdef CONFIG_SB1_PASS_1_WORKAROUNDS
KBUILD_AFLAGS_MODULE += -msb1-pass1-workarounds
KBUILD_CFLAGS_MODULE += -msb1-pass1-workarounds
endif
endif
# For smartmips configurations, there are hundreds of warnings due to ISA overrides
# in assembly and header files. smartmips is only supported for MIPS32r1 onwards
# and there is no support for 64-bit. Various '.set mips2' or '.set mips3' or
# similar directives in the kernel will spam the build logs with the following warnings:
# Warning: the `smartmips' extension requires MIPS32 revision 1 or greater
# or
# Warning: the 64-bit MIPS architecture does not support the `smartmips' extension
# Pass -Wa,--no-warn to disable all assembler warnings until the kernel code has
# been fixed properly.
mips-cflags := "$(cflags-y)"
cflags-$(CONFIG_CPU_HAS_SMARTMIPS) += $(call cc-option,$(mips-cflags),-msmartmips) -Wa,--no-warn
cflags-$(CONFIG_CPU_MICROMIPS) += $(call cc-option,$(mips-cflags),-mmicromips)
ifeq ($(CONFIG_CPU_HAS_MSA),y)
toolchain-msa := $(call cc-option-yn,-$(mips-cflags),mhard-float -mfp64 -Wa$(comma)-mmsa)
cflags-$(toolchain-msa) += -DTOOLCHAIN_SUPPORTS_MSA
endif
#
# Firmware support
#
libs-$(CONFIG_FW_ARC) += arch/mips/fw/arc/
libs-$(CONFIG_FW_CFE) += arch/mips/fw/cfe/
libs-$(CONFIG_FW_SNIPROM) += arch/mips/fw/sni/
libs-y += arch/mips/fw/lib/
#
# Kernel compression
#
ifdef SYS_SUPPORTS_ZBOOT
COMPRESSION_FNAME = vmlinuz
else
COMPRESSION_FNAME = vmlinux
endif
#
# Board-dependent options and extra files
#
include $(srctree)/arch/mips/Kbuild.platforms
ifdef CONFIG_PHYSICAL_START
load-y = $(CONFIG_PHYSICAL_START)
endif
entry-y = 0x$(shell $(NM) vmlinux 2>/dev/null \
| grep "\bkernel_entry\b" | cut -f1 -d \ )
cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic
drivers-$(CONFIG_PCI) += arch/mips/pci/
#
# Automatically detect the build format. By default we choose
# the elf format according to the load address.
# We can always force a build with a 64-bits symbol format by
# passing 'KBUILD_SYM32=no' option to the make's command line.
#
ifdef CONFIG_64BIT
ifndef KBUILD_SYM32
ifeq ($(shell expr $(load-y) \< 0xffffffff80000000), 0)
KBUILD_SYM32 = y
endif
endif
ifeq ($(KBUILD_SYM32)$(call cc-option-yn,-msym32), yy)
cflags-y += -msym32 -DKBUILD_64BIT_SYM32
else
ifeq ($(CONFIG_CPU_DADDI_WORKAROUNDS), y)
$(error CONFIG_CPU_DADDI_WORKAROUNDS unsupported without -msym32)
endif
endif
endif
KBUILD_AFLAGS += $(cflags-y)
KBUILD_CFLAGS += $(cflags-y)
KBUILD_CPPFLAGS += -DVMLINUX_LOAD_ADDRESS=$(load-y)
KBUILD_CPPFLAGS += -DDATAOFFSET=$(if $(dataoffset-y),$(dataoffset-y),0)
bootvars-y = VMLINUX_LOAD_ADDRESS=$(load-y) \
VMLINUX_ENTRY_ADDRESS=$(entry-y)
LDFLAGS += -m $(ld-emul)
ifdef CONFIG_MIPS
CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \
egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \
sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/")
ifdef CONFIG_64BIT
CHECKFLAGS += -m64
endif
endif
OBJCOPYFLAGS += --remove-section=.reginfo
head-y := arch/mips/kernel/head.o
libs-y += arch/mips/lib/
libs-y += arch/mips/math-emu/
# See arch/mips/Kbuild for content of core part of the kernel
core-y += arch/mips/
drivers-$(CONFIG_OPROFILE) += arch/mips/oprofile/
# suspend and hibernation support
drivers-$(CONFIG_PM) += arch/mips/power/
# boot image targets (arch/mips/boot/)
boot-y := vmlinux.bin
boot-y += vmlinux.ecoff
boot-y += vmlinux.srec
ifeq ($(shell expr $(load-y) \< 0xffffffff80000000 2> /dev/null), 0)
boot-y += uImage
boot-y += uImage.bin
boot-y += uImage.bz2
boot-y += uImage.gz
boot-y += uImage.lzma
boot-y += uImage.lzo
endif
# compressed boot image targets (arch/mips/boot/compressed/)
bootz-y := vmlinuz
bootz-y += vmlinuz.bin
bootz-y += vmlinuz.ecoff
bootz-y += vmlinuz.srec
ifdef CONFIG_LASAT
rom.bin rom.sw: vmlinux
$(Q)$(MAKE) $(build)=arch/mips/lasat/image \
$(bootvars-y) $@
endif
#
# Some machines like the Indy need 32-bit ELF binaries for booting purposes.
# Other need ECOFF, so we build a 32-bit ELF binary for them which we then
# convert to ECOFF using elf2ecoff.
#
quiet_cmd_32 = OBJCOPY $@
cmd_32 = $(OBJCOPY) -O $(32bit-bfd) $(OBJCOPYFLAGS) $< $@
vmlinux.32: vmlinux
$(call cmd,32)
#
# The 64-bit ELF tools are pretty broken so at this time we generate 64-bit
# ELF files from 32-bit files by conversion.
#
quiet_cmd_64 = OBJCOPY $@
cmd_64 = $(OBJCOPY) -O $(64bit-bfd) $(OBJCOPYFLAGS) $< $@
vmlinux.64: vmlinux
$(call cmd,64)
all: $(all-y)
# boot
$(boot-y): $(vmlinux-32) FORCE
$(Q)$(MAKE) $(build)=arch/mips/boot VMLINUX=$(vmlinux-32) \
$(bootvars-y) arch/mips/boot/$@
ifdef CONFIG_SYS_SUPPORTS_ZBOOT
# boot/compressed
$(bootz-y): $(vmlinux-32) FORCE
$(Q)$(MAKE) $(build)=arch/mips/boot/compressed \
$(bootvars-y) 32bit-bfd=$(32bit-bfd) $@
else
vmlinuz: FORCE
@echo ' CONFIG_SYS_SUPPORTS_ZBOOT is not enabled'
/bin/false
endif
CLEAN_FILES += vmlinux.32 vmlinux.64
# device-trees
core-$(CONFIG_BUILTIN_DTB) += arch/mips/boot/dts/
%.dtb %.dtb.S %.dtb.o: | scripts
$(Q)$(MAKE) $(build)=arch/mips/boot/dts arch/mips/boot/dts/$@
PHONY += dtbs
dtbs: scripts
$(Q)$(MAKE) $(build)=arch/mips/boot/dts dtbs
archprepare:
ifdef CONFIG_MIPS32_N32
@echo ' Checking missing-syscalls for N32'
$(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=n32"
endif
ifdef CONFIG_MIPS32_O32
@echo ' Checking missing-syscalls for O32'
$(Q)$(MAKE) $(build)=. missing-syscalls missing_syscalls_flags="-mabi=32"
endif
install:
$(Q)install -D -m 755 vmlinux $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE)
ifdef CONFIG_SYS_SUPPORTS_ZBOOT
$(Q)install -D -m 755 vmlinuz $(INSTALL_PATH)/vmlinuz-$(KERNELRELEASE)
endif
$(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE)
$(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE)
archclean:
$(Q)$(MAKE) $(clean)=arch/mips/boot
$(Q)$(MAKE) $(clean)=arch/mips/boot/compressed
$(Q)$(MAKE) $(clean)=arch/mips/lasat
define archhelp
echo ' install - install kernel into $(INSTALL_PATH)'
echo ' vmlinux.ecoff - ECOFF boot image'
echo ' vmlinux.bin - Raw binary boot image'
echo ' vmlinux.srec - SREC boot image'
echo ' vmlinux.32 - 64-bit boot image wrapped in 32bits (IP22/IP32)'
echo ' vmlinuz - Compressed boot(zboot) image'
echo ' vmlinuz.ecoff - ECOFF zboot image'
echo ' vmlinuz.bin - Raw binary zboot image'
echo ' vmlinuz.srec - SREC zboot image'
echo ' uImage - U-Boot image'
echo ' uImage.bin - U-Boot image (uncompressed)'
echo ' uImage.bz2 - U-Boot image (bz2)'
echo ' uImage.gz - U-Boot image (gzip)'
echo ' uImage.lzma - U-Boot image (lzma)'
echo ' uImage.lzo - U-Boot image (lzo)'
echo ' dtbs - Device-tree blobs for enabled boards'
echo
echo ' These will be default as appropriate for a configured platform.'
endef
