blob: f1319e5d25461cb1b90aceadcd1162fafe5e0b55 (
plain) (
tree)
|
|
/***************************************************************************/
/*
* linux/arch/m68knommu/platform/528x/config.c
*
* Sub-architcture dependent initialization code for the Freescale
* 5280, 5281 and 5282 CPUs.
*
* Copyright (C) 1999-2003, Greg Ungerer (gerg@snapgear.com)
* Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
*/
/***************************************************************************/
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/coldfire.h>
#include <asm/mcfsim.h>
#include <asm/mcfuart.h>
/***************************************************************************/
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
static void __init m528x_qspi_init(void)
{
/* setup Port QS for QSPI with gpio CS control */
__raw_writeb(0x07, MCFGPIO_PQSPAR);
}
#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
/***************************************************************************/
static void __init m528x_uarts_init(void)
{
u8 port;
/* make sure PUAPAR is set for UART0 and UART1 */
port = readb(MCF5282_GPIO_PUAPAR);
port |= 0x03 | (0x03 << 2);
writeb(port, MCFGPIO_PUAPAR);
}
/***************************************************************************/
static void __init m528x_fec_init(void)
{
u16 v16;
/* Set multi-function pins to ethernet mode for fec0 */
v16 = readw(MCF_IPSBAR + 0x100056);
writew(v16 | 0xf00, MCF_IPSBAR + 0x100056);
writeb(0xc0, MCF_IPSBAR + 0x100058);
}
/***************************************************************************/
#ifdef CONFIG_WILDFIRE
void wildfire_halt(void)
{
writeb(0, 0x30000007);
writeb(0x2, 0x30000007);
}
#endif
#ifdef CONFIG_WILDFIREMOD
void wildfiremod_halt(void)
{
printk(KERN_INFO "WildFireMod hibernating...\n");
/* Set portE.5 to Digital IO */
MCF5282_GPIO_PEPAR &= ~(1 << (5 * 2));
/* Make portE.5 an output */
MCF5282_GPIO_DDRE |= (1 << 5);
/* Now toggle portE.5 from low to high */
MCF5282_GPIO_PORTE &= ~(1 << 5);
MCF5282_GPIO_PORTE |= (1 << 5);
printk(KERN_EMERG "Failed to hibernate. Halting!\n");
}
#endif
void __init config_BSP(char *commandp, int size)
{
#ifdef CONFIG_WILDFIRE
mach_halt = wildfire_halt;
#endif
#ifdef CONFIG_WILDFIREMOD
mach_halt = wildfiremod_halt;
#endif
mach_sched_init = hw_timer_init;
m528x_uarts_init();
m528x_fec_init();
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
m528x_qspi_init();
#endif
}
/***************************************************************************/
|
