/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All rights reserved.
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/kdev_t.h>
#include <linux/string.h>
#include <linux/tty.h>
#include <linux/console.h>
#include <linux/timex.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/mm.h>
#include <linux/serial.h>
#include <linux/irq.h>
#include <linux/bootmem.h>
#include <linux/mmzone.h>
#include <linux/interrupt.h>
#include <linux/acpi.h>
#include <linux/compiler.h>
#include <linux/sched.h>
#include <linux/root_dev.h>
#include <linux/nodemask.h>
#include <linux/pm.h>
#include <asm/io.h>
#include <asm/sal.h>
#include <asm/machvec.h>
#include <asm/system.h>
#include <asm/processor.h>
#include <asm/sn/arch.h>
#include <asm/sn/addrs.h>
#include <asm/sn/pda.h>
#include <asm/sn/nodepda.h>
#include <asm/sn/sn_cpuid.h>
#include <asm/sn/simulator.h>
#include <asm/sn/leds.h>
#include <asm/sn/bte.h>
#include <asm/sn/shub_mmr.h>
#include <asm/sn/clksupport.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/geo.h>
#include "xtalk/xwidgetdev.h"
#include "xtalk/hubdev.h"
#include <asm/sn/klconfig.h>
DEFINE_PER_CPU(struct pda_s, pda_percpu);
#define MAX_PHYS_MEMORY (1UL << 49) /* 1 TB */
lboard_t *root_lboard[MAX_COMPACT_NODES];
extern void bte_init_node(nodepda_t *, cnodeid_t);
extern void sn_timer_init(void);
extern unsigned long last_time_offset;
extern void (*ia64_mark_idle) (int);
extern void snidle(int);
extern unsigned char acpi_kbd_controller_present;
unsigned long sn_rtc_cycles_per_second;
EXPORT_SYMBOL(sn_rtc_cycles_per_second);
DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
EXPORT_PER_CPU_SYMBOL(__sn_hub_info);
DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_NUMNODES]);
EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid);
DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda);
EXPORT_PER_CPU_SYMBOL(__sn_nodepda);
partid_t sn_partid = -1;
EXPORT_SYMBOL(sn_partid);
char sn_system_serial_number_string[128];
EXPORT_SYMBOL(sn_system_serial_number_string);
u64 sn_partition_serial_number;
EXPORT_SYMBOL(sn_partition_serial_number);
u8 sn_partition_id;
EXPORT_SYMBOL(sn_partition_id);
u8 sn_system_size;
EXPORT_SYMBOL(sn_system_size);
u8 sn_sharing_domain_size;
EXPORT_SYMBOL(sn_sharing_domain_size);
u8 sn_coherency_id;
EXPORT_SYMBOL(sn_coherency_id);
u8 sn_region_size;
EXPORT_SYMBOL(sn_region_size);
short physical_node_map[MAX_PHYSNODE_ID];
EXPORT_SYMBOL(physical_node_map);
int numionodes;
static void sn_init_pdas(char **);
static void scan_for_ionodes(void);
static nodepda_t *nodepdaindr[MAX_COMPACT_NODES];
/*
* The format of "screen_info" is strange, and due to early i386-setup
* code. This is just enough to make the console code think we're on a
* VGA color display.
*/
struct screen_info sn_screen_info = {
.orig_x = 0,
.orig_y = 0,
.orig_video_mode = 3,
.orig_video_cols = 80,
.orig_video_ega_bx = 3,
.orig_video_lines = 25,
.orig_video_isVGA = 1,
.orig_video_points = 16
};
/*
* This is here so we can use the CMOS detection in ide-probe.c to
* determine what drives are present. In theory, we don't need this
* as the auto-detection could be done via ide-probe.c:do_probe() but
* in practice that would be much slower, which is painful when
* running in the simulator. Note that passing zeroes in DRIVE_INFO
* is sufficient (the IDE driver will autodetect the drive geometry).
*/
#ifdef CONFIG_IA64_GENERIC
extern char drive_info[4 * 16];
#else
char drive_info[4 * 16];
#endif
/*
* Get nasid of current cpu early in boot before nodepda is initialized
*/
static int
boot_get_nasid(void)
{
int nasid;
if (ia64_sn_get_sapic_info(get_sapicid(), &nasid, NULL, NULL))
BUG();
return nasid;
}
/*
* This routine can only be used during init, since
* smp_boot_data is an init data structure.
* We have to use smp_boot_data.cpu_phys_id to find
* the physical id of the processor because the normal
* cpu_physical_id() relies on data structures that
* may not be initialized yet.
*/
static int __init pxm_to_nasid(int pxm)
{
int i;
int nid;
nid = pxm_to_nid_map[pxm];
for (i = 0; i < num_node_memblks; i++) {
if (node_memblk[i].nid == nid) {
return NASID_GET(node_memblk[i].start_paddr);
}
}
return -1;
}
/**
* early_sn_setup - early setup routine for SN platforms
*
* Sets up an initial console to aid debugging. Intended primarily
* for bringup. See start_kernel() in init/main.c.
*/
void __init early_sn_setup(void)
{
efi_system_table_t *efi_systab;
efi_config_table_t *config_tables;
struct ia64_sal_systab *sal_systab;
struct ia64_sal_desc_entry_point *ep;
char *p;
int i, j;
/*
* Parse enough of the SAL tables to locate the SAL entry point. Since, console
* IO on SN2 is done via SAL calls, early_printk won't work without this.
*
* This code duplicates some of the ACPI table parsing that is in efi.c & sal.c.
* Any changes to those file may have to be made hereas well.
*/
efi_systab = (efi_system_table_t *) __va(ia64_boot_param->efi_systab);
config_tables = __va(efi_systab->tables);
for (i = 0; i < efi_systab->nr_tables; i++) {
if (efi_guidcmp(config_tables[i].guid, SAL_SYSTEM_TABLE_GUID) ==
0) {
sal_systab = __va(config_tables[i].table);
p = (char *)(sal_systab + 1);
for (j = 0; j < sal_systab->entry_count; j++) {
if (*p == SAL_DESC_ENTRY_POINT) {
ep = (struct ia64_sal_desc_entry_point
*)p;
ia64_sal_handler_init(__va
(ep->sal_proc),
__va(ep->gp));
return;
}
p += SAL_DESC_SIZE(*p);
}
}
}
/* Uh-oh, SAL not available?? */
printk(KERN_ERR "failed to find SAL entry point\n");
}
extern int platform_intr_list[];
extern nasid_t master_nasid;
static int shub_1_1_found __initdata;
/*
* sn_check_for_wars
*
* Set flag for enabling shub specific wars
*/
static inline int __init is_shub_1_1(int nasid)
{
unsigned long id;
int rev;
if (is_shub2())
return 0;
id = REMOTE_HUB_L(nasid, SH1_SHUB_ID);
rev = (id & SH1_SHUB_ID_REVISION_MASK) >> SH1_SHUB_ID_REVISION_SHFT;
return rev <= 2;
}
static void __init sn_check_for_wars(void)
{
int cnode;
if (is_shub2()) {
/* none yet */
} else {
for_each_online_node(cnode) {
if (is_shub_1_1(cnodeid_to_nasid(cnode)))
sn_hub_info->shub_1_1_found = 1;
}
}
}
/**
* sn_setup - SN platform setup routine
* @cmdline_p: kernel command line
*
* Handles platform setup for SN machines. This includes determining
* the RTC frequency (via a SAL call), initializing secondary CPUs, and
* setting up per-node data areas. The console is also initialized here.
*/
void __init sn_setup(char **cmdline_p)
{
long status, ticks_per_sec, drift;
int pxm;
int major = sn_sal_rev_major(), minor = sn_sal_rev_minor();
extern void sn_cpu_init(void);
ia64_sn_plat_set_error_handling_features();
/*
* If the generic code has enabled vga console support - lets
* get rid of it again. This is a kludge for the fact that ACPI
* currtently has no way of informing us if legacy VGA is available
* or not.
*/
#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
if (conswitchp == &vga_con) {
printk(KERN_DEBUG "SGI: Disabling VGA console\n");
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#else
conswitchp = NULL;
#endif /* CONFIG_DUMMY_CONSOLE */
}
#endif /* def(CONFIG_VT) && def(CONFIG_VGA_CONSOLE) */
MAX_DMA_ADDRESS = PAGE_OFFSET + MAX_PHYS_MEMORY;
memset(physical_node_map, -1, sizeof(physical_node_map));
for (pxm = 0; pxm < MAX_PXM_DOMAINS; pxm++)
if (pxm_to_nid_map[pxm] != -1)
physical_node_map[pxm_to_nasid(pxm)] =
pxm_to_nid_map[pxm];
/*
* Old PROMs do not provide an ACPI FADT. Disable legacy keyboard
* support here so we don't have to listen to failed keyboard probe
* messages.
*/
if ((major < 2 || (major == 2 && minor <= 9)) &&
acpi_kbd_controller_present) {
printk(KERN_INFO "Disabling legacy keyboard support as prom "
"is too old and doesn't provide FADT\n");
acpi_kbd_controller_present = 0;
}
printk("SGI SAL version %x.%02x\n", major, minor);
/*
* Confirm the SAL we're running on is recent enough...
*/
if ((major < SN_SAL_MIN_MAJOR) || (major == SN_SAL_MIN_MAJOR &&
minor < SN_SAL_MIN_MINOR)) {
printk(KERN_ERR "This kernel needs SGI SAL version >= "
"%x.%02x\n", SN_SAL_MIN_MAJOR, SN_SAL_MIN_MINOR);
panic("PROM version too old\n");
}
master_nasid = boot_get_nasid();
status =
ia64_sal_freq_base(SAL_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
&drift);
if (status != 0 || ticks_per_sec < 100000) {
printk(KERN_WARNING
"unable to determine platform RTC clock frequency, guessing.\n");
/* PROM gives wrong value for clock freq. so guess */
sn_rtc_cycles_per_second = 1000000000000UL / 30000UL;
} else
sn_rtc_cycles_per_second = ticks_per_sec;
platform_intr_list[ACPI_INTERRUPT_CPEI] = IA64_CPE_VECTOR;
/*
* we set the default root device to /dev/hda
* to make simulation easy
*/
ROOT_DEV = Root_HDA1;
/*
* Create the PDAs and NODEPDAs for all the cpus.
*/
sn_init_pdas(cmdline_p);
ia64_mark_idle = &snidle;
/*
* For the bootcpu, we do this here. All other cpus will make the
* call as part of cpu_init in slave cpu initialization.
*/
sn_cpu_init();
#ifdef CONFIG_SMP
init_smp_config();
#endif
screen_info = sn_screen_info;
sn_timer_init();
/*
* set pm_power_off to a SAL call to allow
* sn machines to power off. The SAL call can be replaced
* by an ACPI interface call when ACPI is fully implemented
* for sn.
*/
pm_power_off = ia64_sn_power_down;
}
/**
* sn_init_pdas - setup node data areas
*
* One time setup for Node Data Area. Called by sn_setup().
*/
static void __init sn_init_pdas(char **cmdline_p)
{
cnodeid_t cnode;
memset(sn_cnodeid_to_nasid, -1,
sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid)));
for_each_online_node(cnode)
sn_cnodeid_to_nasid[cnode] =
pxm_to_nasid(nid_to_pxm_map[cnode]);
numionodes = num_online_nodes();
scan_for_ionodes();
/*
* Allocate & initalize the nodepda for each node.
*/
for_each_online_node(cnode) {
nodepdaindr[cnode] =
alloc_bootmem_node(NODE_DATA(cnode), sizeof(nodepda_t));
memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
memset(nodepdaindr[cnode]->phys_cpuid, -1,
sizeof(nodepdaindr[cnode]->phys_cpuid));
}
/*
* Allocate & initialize nodepda for TIOs. For now, put them on node 0.
*/
for (cnode = num_online_nodes(); cnode < numionodes; cnode++) {
nodepdaindr[cnode] =
alloc_bootmem_node(NODE_DATA(0), sizeof(nodepda_t));
memset(nodepdaindr[cnode], 0, sizeof(nodepda_t));
}
/*
* Now copy the array of nodepda pointers to each nodepda.
*/
for (cnode = 0; cnode < numionodes; cnode++)
memcpy(nodepdaindr[cnode]->pernode_pdaindr, nodepdaindr,
sizeof(nodepdaindr));
/*
* Set up IO related platform-dependent nodepda fields.
* The following routine actually sets up the hubinfo struct
* in nodepda.
*/
for_each_online_node(cnode) {
bte_init_node(nodepdaindr[cnode], cnode);
}
/*
* Initialize the per node hubdev. This includes IO Nodes and
* headless/memless nodes.
*/
for (cnode = 0; cnode < numionodes; cnode++) {
hubdev_init_node(nodepdaindr[cnode], cnode);
}
}
/**
* sn_cpu_init - initialize per-cpu data areas
* @cpuid: cpuid of the caller
*
* Called during cpu initialization on each cpu as it starts.
* Currently, initializes the per-cpu data area for SNIA.
* Also sets up a few fields in the nodepda. Also known as
* platform_cpu_init() by the ia64 machvec code.
*/
void __init sn_cpu_init(void)
{
int cpuid;
int cpuphyid;
int nasid;
int subnode;
int slice;
int cnode;
int i;
static int wars_have_been_checked;
memset(pda, 0, sizeof(pda));
if (ia64_sn_get_sn_info(0, &sn_hub_info->shub2, &sn_hub_info->nasid_bitmask, &sn_hub_info->nasid_shift,
&sn_system_size, &sn_sharing_domain_size, &sn_partition_id,
&sn_coherency_id, &sn_region_size))
BUG();
sn_hub_info->as_shift = sn_hub_info->nasid_shift - 2;
/*
* The boot cpu makes this call again after platform initialization is
* complete.
*/
if (nodepdaindr[0] == NULL)
return;
cpuid = smp_processor_id();
cpuphyid = get_sapicid();
if (ia64_sn_get_sapic_info(cpuphyid, &nasid, &subnode, &slice))
BUG();
for (i=0; i < MAX_NUMNODES; i++) {
if (nodepdaindr[i]) {
nodepdaindr[i]->phys_cpuid[cpuid].nasid = nasid;
nodepdaindr[i]->phys_cpuid[cpuid].slice = slice;
nodepdaindr[i]->phys_cpuid[cpuid].subnode = subnode;
}
}
cnode = nasid_to_cnodeid(nasid);
sn_nodepda = nodepdaindr[cnode];
pda->led_address =
(typeof(pda->led_address)) (LED0 + (slice << LED_CPU_SHIFT));
pda->led_state = LED_ALWAYS_SET;
pda->hb_count = HZ / 2;
pda->hb_state = 0;
pda->idle_flag = 0;
if (cpuid != 0) {
/* copy cpu 0's sn_cnodeid_to_nasid table to this cpu's */
memcpy(sn_cnodeid_to_nasid,
(&per_cpu(__sn_cnodeid_to_nasid, 0)),
sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid)));
}
/*
* Check for WARs.
* Only needs to be done once, on BSP.
* Has to be done after loop above, because it uses this cpu's
* sn_cnodeid_to_nasid table which was just initialized if this
* isn't cpu 0.
* Has to be done before assignment below.
*/
if (!wars_have_been_checked) {
sn_check_for_wars();
wars_have_been_checked = 1;
}
sn_hub_info->shub_1_1_found = shub_1_1_found;
/*
* Set up addresses of PIO/MEM write status registers.
*/
{
u64 pio1[] = {SH1_PIO_WRITE_STATUS_0, 0, SH1_PIO_WRITE_STATUS_1, 0};
u64 pio2[] = {SH2_PIO_WRITE_STATUS_0, SH2_PIO_WRITE_STATUS_1,
SH2_PIO_WRITE_STATUS_2, SH2_PIO_WRITE_STATUS_3};
u64 *pio;
pio = is_shub1() ? pio1 : pio2;
pda->pio_write_status_addr = (volatile unsigned long *) LOCAL_MMR_ADDR(pio[slice]);
pda->pio_write_status_val = is_shub1() ? SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK : 0;
}
/*
* WAR addresses for SHUB 1.x.
*/
if (local_node_data->active_cpu_count++ == 0 && is_shub1()) {
int buddy_nasid;
buddy_nasid =
cnodeid_to_nasid(numa_node_id() ==
num_online_nodes() - 1 ? 0 : numa_node_id() + 1);
pda->pio_shub_war_cam_addr =
(volatile unsigned long *)GLOBAL_MMR_ADDR(nasid,
SH1_PI_CAM_CONTROL);
}
}
/*
* Scan klconfig for ionodes. Add the nasids to the
* physical_node_map and the pda and increment numionodes.
*/
static void __init scan_for_ionodes(void)
{
int nasid = 0;
lboard_t *brd;
/* Setup ionodes with memory */
for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
char *klgraph_header;
cnodeid_t cnodeid;
if (physical_node_map[nasid] == -1)
continue;
cnodeid = -1;
klgraph_header = __va(ia64_sn_get_klconfig_addr(nasid));
if (!klgraph_header) {
if (IS_RUNNING_ON_SIMULATOR())
continue;
BUG(); /* All nodes must have klconfig tables! */
}
cnodeid = nasid_to_cnodeid(nasid);
root_lboard[cnodeid] = (lboard_t *)
NODE_OFFSET_TO_LBOARD((nasid),
((kl_config_hdr_t
*) (klgraph_header))->
ch_board_info);
}
/* Scan headless/memless IO Nodes. */
for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
/* if there's no nasid, don't try to read the klconfig on the node */
if (physical_node_map[nasid] == -1)
continue;
brd = find_lboard_any((lboard_t *)
root_lboard[nasid_to_cnodeid(nasid)],
KLTYPE_SNIA);
if (brd) {
brd = KLCF_NEXT_ANY(brd); /* Skip this node's lboard */
if (!brd)
continue;
}
brd = find_lboard_any(brd, KLTYPE_SNIA);
while (brd) {
sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid;
physical_node_map[brd->brd_nasid] = numionodes;
root_lboard[numionodes] = brd;
numionodes++;
brd = KLCF_NEXT_ANY(brd);
if (!brd)
break;
brd = find_lboard_any(brd, KLTYPE_SNIA);
}
}
/* Scan for TIO nodes. */
for (nasid = 0; nasid < MAX_PHYSNODE_ID; nasid += 2) {
/* if there's no nasid, don't try to read the klconfig on the node */
if (physical_node_map[nasid] == -1)
continue;
brd = find_lboard_any((lboard_t *)
root_lboard[nasid_to_cnodeid(nasid)],
KLTYPE_TIO);
while (brd) {
sn_cnodeid_to_nasid[numionodes] = brd->brd_nasid;
physical_node_map[brd->brd_nasid] = numionodes;
root_lboard[numionodes] = brd;
numionodes++;
brd = KLCF_NEXT_ANY(brd);
if (!brd)
break;
brd = find_lboard_any(brd, KLTYPE_TIO);
}
}
}
int
nasid_slice_to_cpuid(int nasid, int slice)
{
long cpu;
for (cpu=0; cpu < NR_CPUS; cpu++)
if (cpuid_to_nasid(cpu) == nasid &&
cpuid_to_slice(cpu) == slice)
return cpu;
return -1;
}
