/*
* boot.c - Architecture-Specific Low-Level ACPI Boot Support
*
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
* Copyright (C) 2001 Jun Nakajima <jun.nakajima@intel.com>
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
#include <linux/init.h>
#include <linux/config.h>
#include <linux/acpi.h>
#include <linux/efi.h>
#include <linux/module.h>
#include <linux/dmi.h>
#include <linux/irq.h>
#include <asm/pgtable.h>
#include <asm/io_apic.h>
#include <asm/apic.h>
#include <asm/io.h>
#include <asm/mpspec.h>
#ifdef CONFIG_X86_64
extern void __init clustered_apic_check(void);
extern int gsi_irq_sharing(int gsi);
#include <asm/proto.h>
static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 0; }
#else /* X86 */
#ifdef CONFIG_X86_LOCAL_APIC
#include <mach_apic.h>
#include <mach_mpparse.h>
#endif /* CONFIG_X86_LOCAL_APIC */
static inline int gsi_irq_sharing(int gsi) { return gsi; }
#endif /* X86 */
#define BAD_MADT_ENTRY(entry, end) ( \
(!entry) || (unsigned long)entry + sizeof(*entry) > end || \
((acpi_table_entry_header *)entry)->length != sizeof(*entry))
#define PREFIX "ACPI: "
int acpi_noirq __initdata; /* skip ACPI IRQ initialization */
int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */
int acpi_ht __initdata = 1; /* enable HT */
int acpi_lapic;
int acpi_ioapic;
int acpi_strict;
EXPORT_SYMBOL(acpi_strict);
acpi_interrupt_flags acpi_sci_flags __initdata;
int acpi_sci_override_gsi __initdata;
int acpi_skip_timer_override __initdata;
#ifdef CONFIG_X86_LOCAL_APIC
static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
#endif
#ifndef __HAVE_ARCH_CMPXCHG
#warning ACPI uses CMPXCHG, i486 and later hardware
#endif
#define MAX_MADT_ENTRIES 256
u8 x86_acpiid_to_apicid[MAX_MADT_ENTRIES] =
{[0 ... MAX_MADT_ENTRIES - 1] = 0xff };
EXPORT_SYMBOL(x86_acpiid_to_apicid);
/* --------------------------------------------------------------------------
Boot-time Configuration
-------------------------------------------------------------------------- */
/*
* The default interrupt routing model is PIC (8259). This gets
* overriden if IOAPICs are enumerated (below).
*/
enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;
#ifdef CONFIG_X86_64
/* rely on all ACPI tables being in the direct mapping */
char *__acpi_map_table(unsigned long phys_addr, unsigned long size)
{
if (!phys_addr || !size)
return NULL;
if (phys_addr+size <= (end_pfn_map << PAGE_SHIFT) + PAGE_SIZE)
return __va(phys_addr);
return NULL;
}
#else
/*
* Temporarily use the virtual area starting from FIX_IO_APIC_BASE_END,
* to map the target physical address. The problem is that set_fixmap()
* provides a single page, and it is possible that the page is not
* sufficient.
* By using this area, we can map up to MAX_IO_APICS pages temporarily,
* i.e. until the next __va_range() call.
*
* Important Safety Note: The fixed I/O APIC page numbers are *subtracted*
* from the fixed base. That's why we start at FIX_IO_APIC_BASE_END and
* count idx down while incrementing the phys address.
*/
char *__acpi_map_table(unsigned long phys, unsigned long size)
{
unsigned long base, offset, mapped_size;
int idx;
if (phys + size < 8 * 1024 * 1024)
return __va(phys);
offset = phys & (PAGE_SIZE - 1);
mapped_size = PAGE_SIZE - offset;
set_fixmap(FIX_ACPI_END, phys);
base = fix_to_virt(FIX_ACPI_END);
/*
* Most cases can be covered by the below.
*/
idx = FIX_ACPI_END;
while (mapped_size < size) {
if (--idx < FIX_ACPI_BEGIN)
return NULL; /* cannot handle this */
phys += PAGE_SIZE;
set_fixmap(idx, phys);
mapped_size += PAGE_SIZE;
}
return ((unsigned char *)base + offset);
}
#endif
#ifdef CONFIG_PCI_MMCONFIG
/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */
struct acpi_table_mcfg_config *pci_mmcfg_config;
int pci_mmcfg_config_num;
int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
{
struct acpi_table_mcfg *mcfg;
unsigned long i;
int config_size;
if (!phys_addr || !size || !cpu_has_apic)
return -EINVAL;
mcfg = (struct acpi_table_mcfg *)__acpi_map_table(phys_addr, size);
if (!mcfg) {
printk(KERN_WARNING PREFIX "Unable to map MCFG\n");
return -ENODEV;
}
/* how many config structures do we have */
pci_mmcfg_config_num = 0;
i = size - sizeof(struct acpi_table_mcfg);
while (i >= sizeof(struct acpi_table_mcfg_config)) {
++pci_mmcfg_config_num;
i -= sizeof(struct acpi_table_mcfg_config);
};
if (pci_mmcfg_config_num == 0) {
printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
return -ENODEV;
}
config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config);
pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL);
if (!pci_mmcfg_config) {
printk(KERN_WARNING PREFIX
"No memory for MCFG config tables\n");
return -ENOMEM;
}
memcpy(pci_mmcfg_config, &mcfg->config, config_size);
for (i = 0; i < pci_mmcfg_config_num; ++i) {
if (mcfg->config[i].base_reserved) {
printk(KERN_ERR PREFIX
"MMCONFIG not in low 4GB of memory\n");
return -ENODEV;
}
}
return 0;
}
#endif /* CONFIG_PCI_MMCONFIG */
#ifdef CONFIG_X86_LOCAL_APIC
static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size)
{
struct acpi_table_madt *madt = NULL;
if (!phys_addr || !size || !cpu_has_apic)
return -EINVAL;
madt = (struct acpi_table_madt *)__acpi_map_table(phys_addr, size);
if (!madt) {
printk(KERN_WARNING PREFIX "Unable to map MADT\n");
return -ENODEV;
}
if (madt->lapic_address) {
acpi_lapic_addr = (u64) madt->lapic_address;
printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n",
madt->lapic_address);
}
acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id);
return 0;
}
static int __init
acpi_parse_lapic(acpi_table_entry_header * header, const unsigned long end)
{
struct acpi_table_lapic *processor = NULL;
processor = (struct acpi_table_lapic *)header;
if (BAD_MADT_ENTRY(processor, end))
return -EINVAL;
acpi_table_print_madt_entry(header);
/* Record local apic id only when enabled */
if (processor->flags.enabled)
x86_acpiid_to_apicid[processor->acpi_id] = processor->id;
/*
* We need to register disabled CPU as well to permit
* counting disabled CPUs. This allows us to size
* cpus_possible_map more accurately, to permit
* to not preallocating memory for all NR_CPUS
* when we use CPU hotplug.
*/
mp_register_lapic(processor->id, /* APIC ID */
processor->flags.enabled); /* Enabled? */
return 0;
}
static int __init
acpi_parse_lapic_addr_ovr(acpi_table_entry_header * header,
const unsigned long end)
{
struct acpi_table_lapic_addr_ovr *lapic_addr_ovr = NULL;
lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr *)header;
if (BAD_MADT_ENTRY(lapic_addr_ovr, end))
return -EINVAL;
acpi_lapic_addr = lapic_addr_ovr->address;
return 0;
}
static int __init
acpi_parse_lapic_nmi(acpi_table_entry_header * header, const unsigned long end)
{
struct acpi_table_lapic_nmi *lapic_nmi = NULL;
lapic_nmi = (struct acpi_table_lapic_nmi *)header;
if (BAD_MADT_ENTRY(lapic_nmi, end))
return -EINVAL;
acpi_table_print_madt_entry(header);
if (lapic_nmi->lint != 1)
printk(KERN_WARNING PREFIX "NMI not connected to LINT 1!\n");
return 0;
}
#endif /*CONFIG_X86_LOCAL_APIC */
#ifdef CONFIG_X86_IO_APIC
static int __init
acpi_parse_ioapic(acpi_table_entry_header * header, const unsigned long end)
{
struct acpi_table_ioapic *ioapic = NULL;
ioapic = (struct acpi_table_ioapic *)header;
if (BAD_MADT_ENTRY(ioapic, end))
return -EINVAL;
acpi_table_print_madt_entry(header);
mp_register_ioapic(ioapic->id,
ioapic->address, ioapic->global_irq_base);
return 0;
}
/*
* Parse Interrupt Source Override for the ACPI SCI
*/
static void acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger)
{
if (trigger == 0) /* compatible SCI trigger is level */
trigger = 3;
if (polarity == 0) /* compatible SCI polarity is low */
polarity = 3;
/* Command-line over-ride via acpi_sci= */
if (acpi_sci_flags.trigger)
trigger = acpi_sci_flags.trigger;
if (acpi_sci_flags.polarity)
polarity = acpi_sci_flags.polarity;
/*
* mp_config_acpi_legacy_irqs() already setup IRQs < 16
* If GSI is < 16, this will update its flags,
* else it will create a new mp_irqs[] entry.
*/
mp_override_legacy_irq(gsi, polarity, trigger, gsi);
/*
* stash over-ride to indicate we've been here
* and for later update of acpi_fadt
*/
acpi_sci_override_gsi = gsi;
return;
}
static int __init
acpi_parse_int_src_ovr(acpi_table_entry_header * header,
const unsigned long end)
{
struct acpi_table_int_src_ovr *intsrc = NULL;
intsrc = (struct acpi_table_int_src_ovr *)header;
if (BAD_MADT_ENTRY(intsrc, end))
return -EINVAL;
acpi_table_print_madt_entry(header);
if (intsrc->bus_irq == acpi_fadt.sci_int) {
acpi_sci_ioapic_setup(intsrc->global_irq,
intsrc->flags.polarity,
intsrc->flags.trigger);
return 0;
}
if (acpi_skip_timer_override &&
intsrc->bus_irq == 0 && intsrc->global_irq == 2) {
printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
return 0;
}
mp_override_legacy_irq(intsrc->bus_irq,
intsrc->flags.polarity,
intsrc->flags.trigger, intsrc->global_irq);
return 0;
}
static int __init
acpi_parse_nmi_src(acpi_table_entry_header * header, const unsigned long end)
{
struct acpi_table_nmi_src *nmi_src = NULL;
nmi_src = (struct acpi_table_nmi_src *)header;
if (BAD_MADT_ENTRY(nmi_src, end))
return -EINVAL;
acpi_table_print_madt_entry(header);
/* TBD: Support nimsrc entries? */
return 0;
}
#endif /* CONFIG_X86_IO_APIC */
/*
* acpi_pic_sci_set_trigger()
*
* use ELCR to set PIC-mode trigger type for SCI
*
* If a PIC-mode SCI is not recognized or gives spurious IRQ7's
* it may require Edge Trigger -- use "acpi_sci=edge"
*
* Port 0x4d0-4d1 are ECLR1 and ECLR2, the Edge/Level Control Registers
* for the 8259 PIC. bit[n] = 1 means irq[n] is Level, otherwise Edge.
* ECLR1 is IRQ's 0-7 (IRQ 0, 1, 2 must be 0)
* ECLR2 is IRQ's 8-15 (IRQ 8, 13 must be 0)
*/
void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
{
unsigned int mask = 1 << irq;
unsigned int old, new;
/* Real old ELCR mask */
old = inb(0x4d0) | (inb(0x4d1) << 8);
/*
* If we use ACPI to set PCI irq's, then we should clear ELCR
* since we will set it correctly as we enable the PCI irq
* routing.
*/
new = acpi_noirq ? old : 0;
/*
* Update SCI information in the ELCR, it isn't in the PCI
* routing tables..
*/
switch (trigger) {
case 1: /* Edge - clear */
new &= ~mask;
break;
case 3: /* Level - set */
new |= mask;
break;
}
if (old == new)
return;
printk(PREFIX "setting ELCR to %04x (from %04x)\n", new, old);
outb(new, 0x4d0);
outb(new >> 8, 0x4d1);
}
int acpi_gsi_to_irq(u32 gsi, unsigned int *irq)
{
#ifdef CONFIG_X86_IO_APIC
if (use_pci_vector() && !platform_legacy_irq(gsi))
*irq = IO_APIC_VECTOR(gsi);
else
#endif
*irq = gsi_irq_sharing(gsi);
return 0;
}
/*
* success: return IRQ number (>=0)
* failure: return < 0
*/
int acpi_register_gsi(u32 gsi, int triggering, int polarity)
{
unsigned int irq;
unsigned int plat_gsi = gsi;
#ifdef CONFIG_PCI
/*
* Make sure all (legacy) PCI IRQs are set as level-triggered.
*/
if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
extern void eisa_set_level_irq(unsigned int irq);
if (triggering == ACPI_LEVEL_SENSITIVE)
eisa_set_level_irq(gsi);
}
#endif
#ifdef CONFIG_X86_IO_APIC
if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
plat_gsi = mp_register_gsi(gsi, triggering, polarity);
}
#endif
acpi_gsi_to_irq(plat_gsi, &irq);
return irq;
}
EXPORT_SYMBOL(acpi_register_gsi);
/*
* ACPI based hotplug support for CPU
*/
#ifdef CONFIG_ACPI_HOTPLUG_CPU
int acpi_map_lsapic(acpi_handle handle, int *pcpu)
{
/* TBD */
return -EINVAL;
}
EXPORT_SYMBOL(acpi_map_lsapic);
int acpi_unmap_lsapic(int cpu)
{
/* TBD */
return -EINVAL;
}
EXPORT_SYMBOL(acpi_unmap_lsapic);
#endif /* CONFIG_ACPI_HOTPLUG_CPU */
int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
{
/* TBD */
return -EINVAL;
}
EXPORT_SYMBOL(acpi_register_ioapic);
int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
{
/* TBD */
return -EINVAL;
}
EXPORT_SYMBOL(acpi_unregister_ioapic);
static unsigned long __init
acpi_scan_rsdp(unsigned long start, unsigned long length)
{
unsigned long offset = 0;
unsigned long sig_len = sizeof("RSD PTR ") - 1;
/*
* Scan all 16-byte boundaries of the physical memory region for the
* RSDP signature.
*/
for (offset = 0; offset < length; offset += 16) {
if (strncmp((char *)(phys_to_virt(start) + offset), "RSD PTR ", sig_len))
continue;
return (start + offset);
}
return 0;
}
static int __init acpi_parse_sbf(unsigned long phys_addr, unsigned long size)
{
struct acpi_table_sbf *sb;
if (!phys_addr || !size)
return -EINVAL;
sb = (struct acpi_table_sbf *)__acpi_map_table(phys_addr, size);
if (!sb) {
printk(KERN_WARNING PREFIX "Unable to map SBF\n");
return -ENODEV;
}
sbf_port = sb->sbf_cmos; /* Save CMOS port */
return 0;
}
#ifdef CONFIG_HPET_TIMER
static int __init acpi_parse_hpet(unsigned long phys, unsigned long size)
{
struct acpi_table_hpet *hpet_tbl;
if (!phys || !size)
return -EINVAL;
hpet_tbl = (struct acpi_table_hpet *)__acpi_map_table(phys, size);
if (!hpet_tbl) {
printk(KERN_WARNING PREFIX "Unable to map HPET\n");
return -ENODEV;
}
if (hpet_tbl->addr.space_id != ACPI_SPACE_MEM) {
printk(KERN_WARNING PREFIX "HPET timers must be located in "
"memory.\n");
return -1;
}
#ifdef CONFIG_X86_64
vxtime.hpet_address = hpet_tbl->addr.addrl |
((long)hpet_tbl->addr.addrh << 32);
printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
hpet_tbl->id, vxtime.hpet_address);
#else /* X86 */
{
extern unsigned long hpet_address;
hpet_address = hpet_tbl->addr.addrl;
printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
hpet_tbl->id, hpet_address);
}
#endif /* X86 */
return 0;
}
#else
#define acpi_parse_hpet NULL
#endif
#ifdef CONFIG_X86_PM_TIMER
extern u32 pmtmr_ioport;
#endif
static int __init acpi_parse_fadt(unsigned long phys, unsigned long size)
{
struct fadt_descriptor_rev2 *fadt = NULL;
fadt = (struct fadt_descriptor_rev2 *)__acpi_map_table(phys, size);
if (!fadt) {
printk(KERN_WARNING PREFIX "Unable to map FADT\n");
return 0;
}
/* initialize sci_int early for INT_SRC_OVR MADT parsing */
acpi_fadt.sci_int = fadt->sci_int;
/* initialize rev and apic_phys_dest_mode for x86_64 genapic */
acpi_fadt.revision = fadt->revision;
acpi_fadt.force_apic_physical_destination_mode =
fadt->force_apic_physical_destination_mode;
#ifdef CONFIG_X86_PM_TIMER
/* detect the location of the ACPI PM Timer */
if (fadt->revision >= FADT2_REVISION_ID) {
/* FADT rev. 2 */
if (fadt->xpm_tmr_blk.address_space_id !=
ACPI_ADR_SPACE_SYSTEM_IO)
return 0;
pmtmr_ioport = fadt->xpm_tmr_blk.address;
/*
* "X" fields are optional extensions to the original V1.0
* fields, so we must selectively expand V1.0 fields if the
* corresponding X field is zero.
*/
if (!pmtmr_ioport)
pmtmr_ioport = fadt->V1_pm_tmr_blk;
} else {
/* FADT rev. 1 */
pmtmr_ioport = fadt->V1_pm_tmr_blk;
}
if (pmtmr_ioport)
printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n",
pmtmr_ioport);
#endif
return 0;
}
unsigned long __init acpi_find_rsdp(void)
{
unsigned long rsdp_phys = 0;
if (efi_enabled) {
if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
return efi.acpi20;
else if (efi.acpi != EFI_INVALID_TABLE_ADDR)
return efi.acpi;
}
/*
* Scan memory looking for the RSDP signature. First search EBDA (low
* memory) paragraphs and then search upper memory (E0000-FFFFF).
*/
rsdp_phys = acpi_scan_rsdp(0, 0x400);
if (!rsdp_phys)
rsdp_phys = acpi_scan_rsdp(0xE0000, 0x20000);
return rsdp_phys;
}
#ifdef CONFIG_X86_LOCAL_APIC
/*
* Parse LAPIC entries in MADT
* returns 0 on success, < 0 on error
*/
static int __init acpi_parse_madt_lapic_entries(void)
{
int count;
if (!cpu_has_apic)
return -ENODEV;
/*
* Note that the LAPIC address is obtained from the MADT (32-bit value)
* and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
*/
count =
acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR,
acpi_parse_lapic_addr_ovr, 0);
if (count < 0) {
printk(KERN_ERR PREFIX
"Error parsing LAPIC address override entry\n");
return count;
}
mp_register_lapic_address(acpi_lapic_addr);
count = acpi_table_parse_madt(ACPI_MADT_LAPIC, acpi_parse_lapic,
MAX_APICS);
if (!count) {
printk(KERN_ERR PREFIX "No LAPIC entries present\n");
/* TBD: Cleanup to allow fallback to MPS */
return -ENODEV;
} else if (count < 0) {
printk(KERN_ERR PREFIX "Error parsing LAPIC entry\n");
/* TBD: Cleanup to allow fallback to MPS */
return count;
}
count =
acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0);
if (count < 0) {
printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
/* TBD: Cleanup to allow fallback to MPS */
return count;
}
return 0;
}
#endif /* CONFIG_X86_LOCAL_APIC */
#ifdef CONFIG_X86_IO_APIC
/*
* Parse IOAPIC related entries in MADT
* returns 0 on success, < 0 on error
*/
static int __init acpi_parse_madt_ioapic_entries(void)
{
int count;
/*
* ACPI interpreter is required to complete interrupt setup,
* so if it is off, don't enumerate the io-apics with ACPI.
* If MPS is present, it will handle them,
* otherwise the system will stay in PIC mode
*/
if (acpi_disabled || acpi_noirq) {
return -ENODEV;
}
if (!cpu_has_apic)
return -ENODEV;
/*
* if "noapic" boot option, don't look for IO-APICs
*/
if (skip_ioapic_setup) {
printk(KERN_INFO PREFIX "Skipping IOAPIC probe "
"due to 'noapic' option.\n");
return -ENODEV;
}
count =
acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic,
MAX_IO_APICS);
if (!count) {
printk(KERN_ERR PREFIX "No IOAPIC entries present\n");
return -ENODEV;
} else if (count < 0) {
printk(KERN_ERR PREFIX "Error parsing IOAPIC entry\n");
return count;
}
count =
acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr,
NR_IRQ_VECTORS);
if (count < 0) {
printk(KERN_ERR PREFIX
"Error parsing interrupt source overrides entry\n");
/* TBD: Cleanup to allow fallback to MPS */
return count;
}
/*
* If BIOS did not supply an INT_SRC_OVR for the SCI
* pretend we got one so we can set the SCI flags.
*/
if (!acpi_sci_override_gsi)
acpi_sci_ioapic_setup(acpi_fadt.sci_int, 0, 0);
/* Fill in identity legacy mapings where no override */
mp_config_acpi_legacy_irqs();
count =
acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src,
NR_IRQ_VECTORS);
if (count < 0) {
printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
/* TBD: Cleanup to allow fallback to MPS */
return count;
}
return 0;
}
#else
static inline int acpi_parse_madt_ioapic_entries(void)
{
return -1;
}
#endif /* !CONFIG_X86_IO_APIC */
static void __init acpi_process_madt(void)
{
#ifdef CONFIG_X86_LOCAL_APIC
int count, error;
count = acpi_table_parse(ACPI_APIC, acpi_parse_madt);
if (count >= 1) {
/*
* Parse MADT LAPIC entries
*/
error = acpi_parse_madt_lapic_entries();
if (!error) {
acpi_lapic = 1;
#ifdef CONFIG_X86_GENERICARCH
generic_bigsmp_probe();
#endif
/*
* Parse MADT IO-APIC entries
*/
error = acpi_parse_madt_ioapic_entries();
if (!error) {
acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC;
acpi_irq_balance_set(NULL);
acpi_ioapic = 1;
smp_found_config = 1;
clustered_apic_check();
}
}
if (error == -EINVAL) {
/*
* Dell Precision Workstation 410, 610 come here.
*/
printk(KERN_ERR PREFIX
"Invalid BIOS MADT, disabling ACPI\n");
disable_acpi();
}
}
#endif
return;
}
extern int acpi_force;
#ifdef __i386__
static int __init disable_acpi_irq(struct dmi_system_id *d)
{
if (!acpi_force) {
printk(KERN_NOTICE "%s detected: force use of acpi=noirq\n",
d->ident);
acpi_noirq_set();
}
return 0;
}
static int __init disable_acpi_pci(struct dmi_system_id *d)
{
if (!acpi_force) {
printk(KERN_NOTICE "%s detected: force use of pci=noacpi\n",
d->ident);
acpi_disable_pci();
}
return 0;
}
static int __init dmi_disable_acpi(struct dmi_system_id *d)
{
if (!acpi_force) {
printk(KERN_NOTICE "%s detected: acpi off\n", d->ident);
disable_acpi();
} else {
printk(KERN_NOTICE
"Warning: DMI blacklist says broken, but acpi forced\n");
}
return 0;
}
/*
* Limit ACPI to CPU enumeration for HT
*/
static int __init force_acpi_ht(struct dmi_system_id *d)
{
if (!acpi_force) {
printk(KERN_NOTICE "%s detected: force use of acpi=ht\n",
d->ident);
disable_acpi();
acpi_ht = 1;
} else {
printk(KERN_NOTICE
"Warning: acpi=force overrules DMI blacklist: acpi=ht\n");
}
return 0;
}
/*
* If your system is blacklisted here, but you find that acpi=force
* works for you, please contact acpi-devel@sourceforge.net
*/
static struct dmi_system_id __initdata acpi_dmi_table[] = {
/*
* Boxes that need ACPI disabled
*/
{
.callback = dmi_disable_acpi,
.ident = "IBM Thinkpad",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
DMI_MATCH(DMI_BOARD_NAME, "2629H1G"),
},
},
/*
* Boxes that need acpi=ht
*/
{
.callback = force_acpi_ht,
.ident = "FSC Primergy T850",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
DMI_MATCH(DMI_PRODUCT_NAME, "PRIMERGY T850"),
},
},
{
.callback = force_acpi_ht,
.ident = "DELL GX240",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Dell Computer Corporation"),
DMI_MATCH(DMI_BOARD_NAME, "OptiPlex GX240"),
},
},
{
.callback = force_acpi_ht,
.ident = "HP VISUALIZE NT Workstation",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP VISUALIZE NT Workstation"),
},
},
{
.callback = force_acpi_ht,
.ident = "Compaq Workstation W8000",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
DMI_MATCH(DMI_PRODUCT_NAME, "Workstation W8000"),
},
},
{
.callback = force_acpi_ht,
.ident = "ASUS P4B266",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
DMI_MATCH(DMI_BOARD_NAME, "P4B266"),
},
},
{
.callback = force_acpi_ht,
.ident = "ASUS P2B-DS",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
DMI_MATCH(DMI_BOARD_NAME, "P2B-DS"),
},
},
{
.callback = force_acpi_ht,
.ident = "ASUS CUR-DLS",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
DMI_MATCH(DMI_BOARD_NAME, "CUR-DLS"),
},
},
{
.callback = force_acpi_ht,
.ident = "ABIT i440BX-W83977",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "ABIT <http://www.abit.com>"),
DMI_MATCH(DMI_BOARD_NAME, "i440BX-W83977 (BP6)"),
},
},
{
.callback = force_acpi_ht,
.ident = "IBM Bladecenter",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
DMI_MATCH(DMI_BOARD_NAME, "IBM eServer BladeCenter HS20"),
},
},
{
.callback = force_acpi_ht,
.ident = "IBM eServer xSeries 360",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
DMI_MATCH(DMI_BOARD_NAME, "eServer xSeries 360"),
},
},
{
.callback = force_acpi_ht,
.ident = "IBM eserver xSeries 330",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
DMI_MATCH(DMI_BOARD_NAME, "eserver xSeries 330"),
},
},
{
.callback = force_acpi_ht,
.ident = "IBM eserver xSeries 440",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
DMI_MATCH(DMI_PRODUCT_NAME, "eserver xSeries 440"),
},
},
/*
* Boxes that need ACPI PCI IRQ routing disabled
*/
{
.callback = disable_acpi_irq,
.ident = "ASUS A7V",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"),
DMI_MATCH(DMI_BOARD_NAME, "<A7V>"),
/* newer BIOS, Revision 1011, does work */
DMI_MATCH(DMI_BIOS_VERSION,
"ASUS A7V ACPI BIOS Revision 1007"),
},
},
/*
* Boxes that need ACPI PCI IRQ routing and PCI scan disabled
*/
{ /* _BBN 0 bug */
.callback = disable_acpi_pci,
.ident = "ASUS PR-DLS",
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"),
DMI_MATCH(DMI_BIOS_VERSION,
"ASUS PR-DLS ACPI BIOS Revision 1010"),
DMI_MATCH(DMI_BIOS_DATE, "03/21/2003")
},
},
{
.callback = disable_acpi_pci,
.ident = "Acer TravelMate 36x Laptop",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
},
},
{}
};
#endif /* __i386__ */
/*
* acpi_boot_table_init() and acpi_boot_init()
* called from setup_arch(), always.
* 1. checksums all tables
* 2. enumerates lapics
* 3. enumerates io-apics
*
* acpi_table_init() is separate to allow reading SRAT without
* other side effects.
*
* side effects of acpi_boot_init:
* acpi_lapic = 1 if LAPIC found
* acpi_ioapic = 1 if IOAPIC found
* if (acpi_lapic && acpi_ioapic) smp_found_config = 1;
* if acpi_blacklisted() acpi_disabled = 1;
* acpi_irq_model=...
* ...
*
* return value: (currently ignored)
* 0: success
* !0: failure
*/
int __init acpi_boot_table_init(void)
{
int error;
#ifdef __i386__
dmi_check_system(acpi_dmi_table);
#endif
/*
* If acpi_disabled, bail out
* One exception: acpi=ht continues far enough to enumerate LAPICs
*/
if (acpi_disabled && !acpi_ht)
return 1;
/*
* Initialize the ACPI boot-time table parser.
*/
error = acpi_table_init();
if (error) {
disable_acpi();
return error;
}
acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
/*
* blacklist may disable ACPI entirely
*/
error = acpi_blacklisted();
if (error) {
if (acpi_force) {
printk(KERN_WARNING PREFIX "acpi=force override\n");
} else {
printk(KERN_WARNING PREFIX "Disabling ACPI support\n");
disable_acpi();
return error;
}
}
return 0;
}
int __init acpi_boot_init(void)
{
/*
* If acpi_disabled, bail out
* One exception: acpi=ht continues far enough to enumerate LAPICs
*/
if (acpi_disabled && !acpi_ht)
return 1;
acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
/*
* set sci_int and PM timer address
*/
acpi_table_parse(ACPI_FADT, acpi_parse_fadt);
/*
* Process the Multiple APIC Description Table (MADT), if present
*/
acpi_process_madt();
acpi_table_parse(ACPI_HPET, acpi_parse_hpet);
return 0;
}
