/*
* arch/arm/plat-spear/time.c
*
* Copyright (C) 2010 ST Microelectronics
* Shiraz Hashim<shiraz.hashim@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/clk.h>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/time.h>
#include <linux/irq.h>
#include <asm/mach/time.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/spear.h>
#include <mach/generic.h>
/*
* We would use TIMER0 and TIMER1 as clockevent and clocksource.
* Timer0 and Timer1 both belong to same gpt block in cpu subbsystem. Further
* they share same functional clock. Any change in one's functional clock will
* also affect other timer.
*/
#define CLKEVT 0 /* gpt0, channel0 as clockevent */
#define CLKSRC 1 /* gpt0, channel1 as clocksource */
/* Register offsets, x is channel number */
#define CR(x) ((x) * 0x80 + 0x80)
#define IR(x) ((x) * 0x80 + 0x84)
#define LOAD(x) ((x) * 0x80 + 0x88)
#define COUNT(x) ((x) * 0x80 + 0x8C)
/* Reg bit definitions */
#define CTRL_INT_ENABLE 0x0100
#define CTRL_ENABLE 0x0020
#define CTRL_ONE_SHOT 0x0010
#define CTRL_PRESCALER1 0x0
#define CTRL_PRESCALER2 0x1
#define CTRL_PRESCALER4 0x2
#define CTRL_PRESCALER8 0x3
#define CTRL_PRESCALER16 0x4
#define CTRL_PRESCALER32 0x5
#define CTRL_PRESCALER64 0x6
#define CTRL_PRESCALER128 0x7
#define CTRL_PRESCALER256 0x8
#define INT_STATUS 0x1
/*
* Minimum clocksource/clockevent timer range in seconds
*/
#define SPEAR_MIN_RANGE 4
static __iomem void *gpt_base;
static struct clk *gpt_clk;
static void clockevent_set_mode(enum clock_event_mode mode,
struct clock_event_device *clk_event_dev);
static int clockevent_next_event(unsigned long evt,
struct clock_event_device *clk_event_dev);
static cycle_t clocksource_read_cycles(struct clocksource *cs)
{
return (cycle_t) readw(gpt_base + COUNT(CLKSRC));
}
static struct clocksource clksrc = {
.name = "tmr1",
.rating = 200, /* its a pretty decent clock */
.read = clocksource_read_cycles,
.mask = 0xFFFF, /* 16 bits */
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static void spear_clocksource_init(void)
{
u32 tick_rate;
u16 val;
/* program the prescaler (/256)*/
writew(CTRL_PRESCALER256, gpt_base + CR(CLKSRC));
/* find out actual clock driving Timer */
tick_rate = clk_get_rate(gpt_clk);
tick_rate >>= CTRL_PRESCALER256;
writew(0xFFFF, gpt_base + LOAD(CLKSRC));
val = readw(gpt_base + CR(CLKSRC));
val &= ~CTRL_ONE_SHOT; /* autoreload mode */
val |= CTRL_ENABLE ;
writew(val, gpt_base + CR(CLKSRC));
/* register the clocksource */
clocksource_register_hz(&clksrc, tick_rate);
}
static struct clock_event_device clkevt = {
.name = "tmr0",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
.set_mode = clockevent_set_mode,
.set_next_event = clockevent_next_event,
.shift = 0, /* to be computed */
};
static void clockevent_set_mode(enum clock_event_mode mode,
struct clock_event_device *clk_event_dev)
{
u32 period;
u16 val;
/* stop the timer */
val = readw(gpt_base + CR(CLKEVT));
val &= ~CTRL_ENABLE;
writew(val, gpt_base + CR(CLKEVT));
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
period = clk_get_rate(gpt_clk) / HZ;
period >>= CTRL_PRESCALER16;
writew(period, gpt_base + LOAD(CLKEVT));
val = readw(gpt_base + CR(CLKEVT));
val &= ~CTRL_ONE_SHOT;
val |= CTRL_ENABLE | CTRL_INT_ENABLE;
writew(val, gpt_base + CR(CLKEVT));
break;
case CLOCK_EVT_MODE_ONESHOT:
val = readw(gpt_base + CR(CLKEVT));
val |= CTRL_ONE_SHOT;
writew(val, gpt_base + CR(CLKEVT));
break;
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_RESUME:
break;
default:
pr_err("Invalid mode requested\n");
break;
}
}
static int clockevent_next_event(unsigned long cycles,
struct clock_event_device *clk_event_dev)
{
u16 val;
writew(cycles, gpt_base + LOAD(CLKEVT));
val = readw(gpt_base + CR(CLKEVT));
val |= CTRL_ENABLE | CTRL_INT_ENABLE;
writew(val, gpt_base + CR(CLKEVT));
return 0;
}
static irqreturn_t spear_timer_interrupt(int irq, void *dev_id)
{
struct clock_event_device *evt = &clkevt;
writew(INT_STATUS, gpt_base + IR(CLKEVT));
evt->event_handler(evt);
return IRQ_HANDLED;
}
static struct irqaction spear_timer_irq = {
.name = "timer",
.flags = IRQF_DISABLED | IRQF_TIMER,
.handler = spear_timer_interrupt
};
static void __init spear_clockevent_init(void)
{
u32 tick_rate;
/* program the prescaler */
writew(CTRL_PRESCALER16, gpt_base + CR(CLKEVT));
tick_rate = clk_get_rate(gpt_clk);
tick_rate >>= CTRL_PRESCALER16;
clockevents_calc_mult_shift(&clkevt, tick_rate, SPEAR_MIN_RANGE);
clkevt.max_delta_ns = clockevent_delta2ns(0xfff0,
&clkevt);
clkevt.min_delta_ns = clockevent_delta2ns(3, &clkevt);
clkevt.cpumask = cpumask_of(0);
clockevents_register_device(&clkevt);
setup_irq(SPEAR_GPT0_CHAN0_IRQ, &spear_timer_irq);
}
void __init spear_setup_timer(void)
{
int ret;
if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) {
pr_err("%s:cannot get IO addr\n", __func__);
return;
}
gpt_base = (void __iomem *)ioremap(SPEAR_GPT0_BASE, SZ_1K);
if (!gpt_base) {
pr_err("%s:ioremap failed for gpt\n", __func__);
goto err_mem;
}
gpt_clk = clk_get_sys("gpt0", NULL);
if (!gpt_clk) {
pr_err("%s:couldn't get clk for gpt\n", __func__);
goto err_iomap;
}
ret = clk_enable(gpt_clk);
if (ret < 0) {
pr_err("%s:couldn't enable gpt clock\n", __func__);
goto err_clk;
}
spear_clockevent_init();
spear_clocksource_init();
return;
err_clk:
clk_put(gpt_clk);
err_iomap:
iounmap(gpt_base);
err_mem:
release_mem_region(SPEAR_GPT0_BASE, SZ_1K);
}
