/*
* linux/arch/arm/plat-omap/common.c
*
* Code common to all OMAP machines.
* The file is created by Tony Lindgren <tony@atomide.com>
*
* Copyright (C) 2009 Texas Instruments
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/console.h>
#include <linux/serial.h>
#include <linux/tty.h>
#include <linux/serial_8250.h>
#include <linux/serial_reg.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <mach/hardware.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
#include <asm/setup.h>
#include <plat/common.h>
#include <plat/board.h>
#include <plat/control.h>
#include <plat/mux.h>
#include <plat/fpga.h>
#include <plat/clock.h>
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
# include "../mach-omap2/sdrc.h"
#endif
#define NO_LENGTH_CHECK 0xffffffff
unsigned char omap_bootloader_tag[512];
int omap_bootloader_tag_len;
struct omap_board_config_kernel *omap_board_config;
int omap_board_config_size;
/* used by omap-smp.c and board-4430sdp.c */
void __iomem *gic_cpu_base_addr;
static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
{
struct omap_board_config_kernel *kinfo = NULL;
int i;
/* Try to find the config from the board-specific structures
* in the kernel. */
for (i = 0; i < omap_board_config_size; i++) {
if (omap_board_config[i].tag == tag) {
if (skip == 0) {
kinfo = &omap_board_config[i];
break;
} else {
skip--;
}
}
}
if (kinfo == NULL)
return NULL;
return kinfo->data;
}
const void *__omap_get_config(u16 tag, size_t len, int nr)
{
return get_config(tag, len, nr, NULL);
}
EXPORT_SYMBOL(__omap_get_config);
const void *omap_get_var_config(u16 tag, size_t *len)
{
return get_config(tag, NO_LENGTH_CHECK, 0, len);
}
EXPORT_SYMBOL(omap_get_var_config);
/*
* 32KHz clocksource ... always available, on pretty most chips except
* OMAP 730 and 1510. Other timers could be used as clocksources, with
* higher resolution in free-running counter modes (e.g. 12 MHz xtal),
* but systems won't necessarily want to spend resources that way.
*/
#define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410
#if !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX))
#include <linux/clocksource.h>
#ifdef CONFIG_ARCH_OMAP16XX
static cycle_t omap16xx_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED);
}
#else
#define omap16xx_32k_read NULL
#endif
#ifdef CONFIG_ARCH_OMAP2420
static cycle_t omap2420_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10);
}
#else
#define omap2420_32k_read NULL
#endif
#ifdef CONFIG_ARCH_OMAP2430
static cycle_t omap2430_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10);
}
#else
#define omap2430_32k_read NULL
#endif
#ifdef CONFIG_ARCH_OMAP34XX
static cycle_t omap34xx_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10);
}
#else
#define omap34xx_32k_read NULL
#endif
#ifdef CONFIG_ARCH_OMAP4
static cycle_t omap44xx_32k_read(struct clocksource *cs)
{
return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10);
}
#else
#define omap44xx_32k_read NULL
#endif
/*
* Kernel assumes that sched_clock can be called early but may not have
* things ready yet.
*/
static cycle_t omap_32k_read_dummy(struct clocksource *cs)
{
return 0;
}
static struct clocksource clocksource_32k = {
.name = "32k_counter",
.rating = 250,
.read = omap_32k_read_dummy,
.mask = CLOCKSOURCE_MASK(32),
.shift = 10,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
/*
* Returns current time from boot in nsecs. It's OK for this to wrap
* around for now, as it's just a relative time stamp.
*/
unsigned long long sched_clock(void)
{
return clocksource_cyc2ns(clocksource_32k.read(&clocksource_32k),
clocksource_32k.mult, clocksource_32k.shift);
}
static int __init omap_init_clocksource_32k(void)
{
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
if (cpu_is_omap16xx() || cpu_class_is_omap2()) {
struct clk *sync_32k_ick;
if (cpu_is_omap16xx())
clocksource_32k.read = omap16xx_32k_read;
else if (cpu_is_omap2420())
clocksource_32k.read = omap2420_32k_read;
else if (cpu_is_omap2430())
clocksource_32k.read = omap2430_32k_read;
else if (cpu_is_omap34xx())
clocksource_32k.read = omap34xx_32k_read;
else if (cpu_is_omap44xx())
clocksource_32k.read = omap44xx_32k_read;
else
return -ENODEV;
sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
if (sync_32k_ick)
clk_enable(sync_32k_ick);
clocksource_32k.mult = clocksource_hz2mult(32768,
clocksource_32k.shift);
if (clocksource_register(&clocksource_32k))
printk(err, clocksource_32k.name);
}
return 0;
}
arch_initcall(omap_init_clocksource_32k);
#endif /* !(defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP15XX)) */
/* Global address base setup code */
#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
{
omap2_set_globals_tap(omap2_globals);
omap2_set_globals_sdrc(omap2_globals);
omap2_set_globals_control(omap2_globals);
omap2_set_globals_prcm(omap2_globals);
}
#endif
#if defined(CONFIG_ARCH_OMAP2420)
static struct omap_globals omap242x_globals = {
.class = OMAP242X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x48014000),
.sdrc = OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
.sms = OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
.ctrl = OMAP2_L4_IO_ADDRESS(OMAP2420_CTRL_BASE),
.prm = OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
.cm = OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
};
void __init omap2_set_globals_242x(void)
{
__omap2_set_globals(&omap242x_globals);
}
#endif
#if defined(CONFIG_ARCH_OMAP2430)
static struct omap_globals omap243x_globals = {
.class = OMAP243X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x4900a000),
.sdrc = OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
.sms = OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
.ctrl = OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
.prm = OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
.cm = OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
};
void __init omap2_set_globals_243x(void)
{
__omap2_set_globals(&omap243x_globals);
}
#endif
#if defined(CONFIG_ARCH_OMAP3430)
static struct omap_globals omap343x_globals = {
.class = OMAP343X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(0x4830A000),
.sdrc = OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
.sms = OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
.ctrl = OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
.prm = OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
.cm = OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
};
void __init omap2_set_globals_343x(void)
{
__omap2_set_globals(&omap343x_globals);
}
#endif
#if defined(CONFIG_ARCH_OMAP4)
static struct omap_globals omap4_globals = {
.class = OMAP443X_CLASS,
.tap = OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
.ctrl = OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
.prm = OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
.cm = OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
.cm2 = OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
};
void __init omap2_set_globals_443x(void)
{
omap2_set_globals_tap(&omap4_globals);
omap2_set_globals_control(&omap4_globals);
omap2_set_globals_prcm(&omap4_globals);
}
#endif
