/* linux/arch/arm/mach-s3c2412/s3c2412.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://armlinux.simtec.co.uk/.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/sysdev.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <asm/proc-fns.h>
#include <asm/irq.h>
#include <mach/reset.h>
#include <mach/idle.h>
#include <plat/cpu-freq.h>
#include <mach/regs-clock.h>
#include <plat/regs-serial.h>
#include <mach/regs-power.h>
#include <mach/regs-gpio.h>
#include <mach/regs-gpioj.h>
#include <mach/regs-dsc.h>
#include <plat/regs-spi.h>
#include <mach/regs-s3c2412.h>
#include <plat/s3c2412.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/clock.h>
#include <plat/pm.h>
#include <plat/pll.h>
#ifndef CONFIG_CPU_S3C2412_ONLY
void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO;
static inline void s3c2412_init_gpio2(void)
{
s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
}
#else
#define s3c2412_init_gpio2() do { } while(0)
#endif
/* Initial IO mappings */
static struct map_desc s3c2412_iodesc[] __initdata = {
IODESC_ENT(CLKPWR),
IODESC_ENT(TIMER),
IODESC_ENT(WATCHDOG),
};
/* uart registration process */
void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
s3c24xx_init_uartdevs("s3c2412-uart", s3c2410_uart_resources, cfg, no);
/* rename devices that are s3c2412/s3c2413 specific */
s3c_device_sdi.name = "s3c2412-sdi";
s3c_device_lcd.name = "s3c2412-lcd";
s3c_device_nand.name = "s3c2412-nand";
/* alter IRQ of SDI controller */
s3c_device_sdi.resource[1].start = IRQ_S3C2412_SDI;
s3c_device_sdi.resource[1].end = IRQ_S3C2412_SDI;
/* spi channel related changes, s3c2412/13 specific */
s3c_device_spi0.name = "s3c2412-spi";
s3c_device_spi0.resource[0].end = S3C24XX_PA_SPI + 0x24;
s3c_device_spi1.name = "s3c2412-spi";
s3c_device_spi1.resource[0].start = S3C24XX_PA_SPI + S3C2412_SPI1;
s3c_device_spi1.resource[0].end = S3C24XX_PA_SPI + S3C2412_SPI1 + 0x24;
}
/* s3c2412_idle
*
* use the standard idle call by ensuring the idle mode
* in power config, then issuing the idle co-processor
* instruction
*/
static void s3c2412_idle(void)
{
unsigned long tmp;
/* ensure our idle mode is to go to idle */
tmp = __raw_readl(S3C2412_PWRCFG);
tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
__raw_writel(tmp, S3C2412_PWRCFG);
cpu_do_idle();
}
static void s3c2412_hard_reset(void)
{
/* errata "Watch-dog/Software Reset Problem" specifies that
* this reset must be done with the SYSCLK sourced from
* EXTCLK instead of FOUT to avoid a glitch in the reset
* mechanism.
*
* See the watchdog section of the S3C2412 manual for more
* information on this fix.
*/
__raw_writel(0x00, S3C2412_CLKSRC);
__raw_writel(S3C2412_SWRST_RESET, S3C2412_SWRST);
mdelay(1);
}
/* s3c2412_map_io
*
* register the standard cpu IO areas, and any passed in from the
* machine specific initialisation.
*/
void __init s3c2412_map_io(void)
{
/* move base of IO */
s3c2412_init_gpio2();
/* set our idle function */
s3c24xx_idle = s3c2412_idle;
/* set custom reset hook */
s3c24xx_reset_hook = s3c2412_hard_reset;
/* register our io-tables */
iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));
}
void __init_or_cpufreq s3c2412_setup_clocks(void)
{
struct clk *xtal_clk;
unsigned long tmp;
unsigned long xtal;
unsigned long fclk;
unsigned long hclk;
unsigned long pclk;
xtal_clk = clk_get(NULL, "xtal");
xtal = clk_get_rate(xtal_clk);
clk_put(xtal_clk);
/* now we've got our machine bits initialised, work out what
* clocks we've got */
fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2);
clk_mpll.rate = fclk;
tmp = __raw_readl(S3C2410_CLKDIVN);
/* work out clock scalings */
hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1);
hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1);
pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1);
/* print brieft summary of clocks, etc */
printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
s3c24xx_setup_clocks(fclk, hclk, pclk);
}
void __init s3c2412_init_clocks(int xtal)
{
/* initialise the clocks here, to allow other things like the
* console to use them
*/
s3c24xx_register_baseclocks(xtal);
s3c2412_setup_clocks();
s3c2412_baseclk_add();
}
/* need to register class before we actually register the device, and
* we also need to ensure that it has been initialised before any of the
* drivers even try to use it (even if not on an s3c2412 based system)
* as a driver which may support both 2410 and 2440 may try and use it.
*/
struct sysdev_class s3c2412_sysclass = {
.name = "s3c2412-core",
};
static int __init s3c2412_core_init(void)
{
return sysdev_class_register(&s3c2412_sysclass);
}
core_initcall(s3c2412_core_init);
static struct sys_device s3c2412_sysdev = {
.cls = &s3c2412_sysclass,
};
int __init s3c2412_init(void)
{
printk("S3C2412: Initialising architecture\n");
return sysdev_register(&s3c2412_sysdev);
}
