/* linux/arch/arm/mach-s3c2410/mach-h1940.c
*
* Copyright (c) 2003-2005 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* http://www.handhelds.org/projects/h1940.html
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-lcd.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-clock.h>
#include <asm/arch/h1940.h>
#include <asm/arch/h1940-latch.h>
#include <asm/arch/fb.h>
#include <asm/arch/udc.h>
#include <asm/plat-s3c24xx/clock.h>
#include <asm/plat-s3c24xx/devs.h>
#include <asm/plat-s3c24xx/cpu.h>
#include <asm/plat-s3c24xx/pm.h>
static struct map_desc h1940_iodesc[] __initdata = {
[0] = {
.virtual = (unsigned long)H1940_LATCH,
.pfn = __phys_to_pfn(H1940_PA_LATCH),
.length = SZ_16K,
.type = MT_DEVICE
},
};
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
static struct s3c2410_uartcfg h1940_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = 0x245,
.ulcon = 0x03,
.ufcon = 0x00,
},
/* IR port */
[2] = {
.hwport = 2,
.flags = 0,
.uart_flags = UPF_CONS_FLOW,
.ucon = 0x3c5,
.ulcon = 0x43,
.ufcon = 0x51,
}
};
/* Board control latch control */
static unsigned int latch_state = H1940_LATCH_DEFAULT;
void h1940_latch_control(unsigned int clear, unsigned int set)
{
unsigned long flags;
local_irq_save(flags);
latch_state &= ~clear;
latch_state |= set;
__raw_writel(latch_state, H1940_LATCH);
local_irq_restore(flags);
}
EXPORT_SYMBOL_GPL(h1940_latch_control);
static void h1940_udc_pullup(enum s3c2410_udc_cmd_e cmd)
{
printk(KERN_DEBUG "udc: pullup(%d)\n",cmd);
switch (cmd)
{
case S3C2410_UDC_P_ENABLE :
h1940_latch_control(0, H1940_LATCH_USB_DP);
break;
case S3C2410_UDC_P_DISABLE :
h1940_latch_control(H1940_LATCH_USB_DP, 0);
break;
case S3C2410_UDC_P_RESET :
break;
default:
break;
}
}
static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
.udc_command = h1940_udc_pullup,
.vbus_pin = S3C2410_GPG5,
.vbus_pin_inverted = 1,
};
/**
* Set lcd on or off
**/
static struct s3c2410fb_mach_info h1940_lcdcfg __initdata = {
.fixed_syncs= 1,
.regs={
.lcdcon1= S3C2410_LCDCON1_TFT16BPP | \
S3C2410_LCDCON1_TFT | \
S3C2410_LCDCON1_CLKVAL(0x0C),
.lcdcon2= S3C2410_LCDCON2_VBPD(7) | \
S3C2410_LCDCON2_LINEVAL(319) | \
S3C2410_LCDCON2_VFPD(6) | \
S3C2410_LCDCON2_VSPW(0),
.lcdcon3= S3C2410_LCDCON3_HBPD(19) | \
S3C2410_LCDCON3_HOZVAL(239) | \
S3C2410_LCDCON3_HFPD(7),
.lcdcon4= S3C2410_LCDCON4_MVAL(0) | \
S3C2410_LCDCON4_HSPW(3),
.lcdcon5= S3C2410_LCDCON5_FRM565 | \
S3C2410_LCDCON5_INVVLINE | \
S3C2410_LCDCON5_HWSWP,
},
.lpcsel= 0x02,
.gpccon= 0xaa940659,
.gpccon_mask= 0xffffffff,
.gpcup= 0x0000ffff,
.gpcup_mask= 0xffffffff,
.gpdcon= 0xaa84aaa0,
.gpdcon_mask= 0xffffffff,
.gpdup= 0x0000faff,
.gpdup_mask= 0xffffffff,
.width= 240,
.height= 320,
.xres= {240,240,240},
.yres= {320,320,320},
.bpp= {16,16,16},
};
static struct platform_device s3c_device_leds = {
.name = "h1940-leds",
.id = -1,
};
static struct platform_device *h1940_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
&s3c_device_wdt,
&s3c_device_i2c,
&s3c_device_iis,
&s3c_device_usbgadget,
&s3c_device_leds,
};
static struct s3c24xx_board h1940_board __initdata = {
.devices = h1940_devices,
.devices_count = ARRAY_SIZE(h1940_devices)
};
static void __init h1940_map_io(void)
{
s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
s3c24xx_set_board(&h1940_board);
/* setup PM */
#ifdef CONFIG_PM_H1940
memcpy(phys_to_virt(H1940_SUSPEND_RESUMEAT), h1940_pm_return, 1024);
#endif
s3c2410_pm_init();
}
static void __init h1940_init_irq(void)
{
s3c24xx_init_irq();
}
static void __init h1940_init(void)
{
u32 tmp;
s3c24xx_fb_set_platdata(&h1940_lcdcfg);
s3c24xx_udc_set_platdata(&h1940_udc_cfg);
/* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
tmp = (
0x78 << S3C2410_PLLCON_MDIVSHIFT)
| (0x02 << S3C2410_PLLCON_PDIVSHIFT)
| (0x03 << S3C2410_PLLCON_SDIVSHIFT);
writel(tmp, S3C2410_UPLLCON);
}
MACHINE_START(H1940, "IPAQ-H1940")
/* Maintainer: Ben Dooks <ben@fluff.org> */
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = h1940_map_io,
.init_irq = h1940_init_irq,
.init_machine = h1940_init,
.timer = &s3c24xx_timer,
MACHINE_END
