/* arch/arm/mach-s3c2410/include/mach/debug-macro.S
*
* Debugging macro include header
*
* Copyright (C) 1994-1999 Russell King
* Copyright (C) 2005 Simtec Electronics
*
* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <mach/map.h>
#include <mach/regs-gpio.h>
#include <plat/regs-serial.h>
#define S3C2410_UART1_OFF (0x4000)
#define SHIFT_2440TXF (14-9)
.macro addruart, rp, rv
ldr \rp, = S3C24XX_PA_UART
ldr \rv, = S3C24XX_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART)
#endif
.endm
.macro fifo_full_s3c24xx rd, rx
@ check for arm920 vs arm926. currently assume all arm926
@ devices have an 64 byte FIFO identical to the s3c2440
mrc p15, 0, \rd, c0, c0
and \rd, \rd, #0xff0
teq \rd, #0x260
beq 1004f
mrc p15, 0, \rd, c1, c0
tst \rd, #1
addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
bic \rd, \rd, #0xff000
ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
and \rd, \rd, #0x00ff0000
teq \rd, #0x00440000 @ is it 2440?
1004:
ldr \rd, [ \rx, # S3C2410_UFSTAT ]
moveq \rd, \rd, lsr #SHIFT_2440TXF
tst \rd, #S3C2410_UFSTAT_TXFULL
.endm
.macro fifo_full_s3c2410 rd, rx
ldr \rd, [ \rx, # S3C2410_UFSTAT ]
tst \rd, #S3C2410_UFSTAT_TXFULL
.endm
/* fifo level reading */
.macro fifo_level_s3c24xx rd, rx
@ check for arm920 vs arm926. currently assume all arm926
@ devices have an 64 byte FIFO identical to the s3c2440
mrc p15, 0, \rd, c0, c0
and \rd, \rd, #0xff0
teq \rd, #0x260
beq 10000f
mrc p15, 0, \rd, c1, c0
tst \rd, #1
addeq \rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)
addne \rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)
bic \rd, \rd, #0xff000
ldr \rd, [ \rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0) ]
and \rd, \rd, #0x00ff0000
teq \rd, #0x00440000 @ is it 2440?
10000:
ldr \rd, [ \rx, # S3C2410_UFSTAT ]
andne \rd, \rd, #S3C2410_UFSTAT_TXMASK
andeq \rd, \rd, #S3C2440_UFSTAT_TXMASK
.endm
.macro fifo_level_s3c2410 rd, rx
ldr \rd, [ \rx, # S3C2410_UFSTAT ]
and \rd, \rd, #S3C2410_UFSTAT_TXMASK
.endm
/* Select the correct implementation depending on the configuration. The
* S3C2440 will get selected by default, as these are the most widely
* used variants of these
*/
#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)
#define fifo_full fifo_full_s3c2410
#define fifo_level fifo_level_s3c2410
#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)
#define fifo_full fifo_full_s3c24xx
#define fifo_level fifo_level_s3c24xx
#endif
/* include the reset of the code which will do the work */
#include <plat/debug-macro.S>
