/*
* arch/arm/mach-realview/realview_pbx.c
*
* Copyright (C) 2009 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/amba/bus.h>
#include <linux/amba/pl061.h>
#include <linux/amba/mmci.h>
#include <linux/io.h>
#include <asm/irq.h>
#include <asm/leds.h>
#include <asm/mach-types.h>
#include <asm/smp_twd.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <mach/hardware.h>
#include <mach/board-pbx.h>
#include <mach/irqs.h>
#include "core.h"
static struct map_desc realview_pbx_io_desc[] __initdata = {
{
.virtual = IO_ADDRESS(REALVIEW_SYS_BASE),
.pfn = __phys_to_pfn(REALVIEW_SYS_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PBX_GIC_CPU_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBX_GIC_CPU_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PBX_GIC_DIST_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBX_GIC_DIST_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_SCTL_BASE),
.pfn = __phys_to_pfn(REALVIEW_SCTL_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PBX_TIMER0_1_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBX_TIMER0_1_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PBX_TIMER2_3_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBX_TIMER2_3_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
},
#ifdef CONFIG_PCI
{
.virtual = PCIX_UNIT_BASE,
.pfn = __phys_to_pfn(REALVIEW_PBX_PCI_BASE),
.length = REALVIEW_PBX_PCI_BASE_SIZE,
.type = MT_DEVICE,
},
#endif
#ifdef CONFIG_DEBUG_LL
{
.virtual = IO_ADDRESS(REALVIEW_PBX_UART0_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBX_UART0_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
},
#endif
};
static struct map_desc realview_local_io_desc[] __initdata = {
{
.virtual = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_CPU_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_CPU_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PBX_TILE_GIC_DIST_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBX_TILE_GIC_DIST_BASE),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = IO_ADDRESS(REALVIEW_PBX_TILE_L220_BASE),
.pfn = __phys_to_pfn(REALVIEW_PBX_TILE_L220_BASE),
.length = SZ_8K,
.type = MT_DEVICE,
}
};
static void __init realview_pbx_map_io(void)
{
iotable_init(realview_pbx_io_desc, ARRAY_SIZE(realview_pbx_io_desc));
if (core_tile_pbx11mp() || core_tile_pbxa9mp())
iotable_init(realview_local_io_desc, ARRAY_SIZE(realview_local_io_desc));
}
static struct pl061_platform_data gpio0_plat_data = {
.gpio_base = 0,
.irq_base = -1,
};
static struct pl061_platform_data gpio1_plat_data = {
.gpio_base = 8,
.irq_base = -1,
};
static struct pl061_platform_data gpio2_plat_data = {
.gpio_base = 16,
.irq_base = -1,
};
/*
* RealView PBXCore AMBA devices
*/
#define GPIO2_IRQ { IRQ_PBX_GPIO2, NO_IRQ }
#define GPIO2_DMA { 0, 0 }
#define GPIO3_IRQ { IRQ_PBX_GPIO3, NO_IRQ }
#define GPIO3_DMA { 0, 0 }
#define AACI_IRQ { IRQ_PBX_AACI, NO_IRQ }
#define AACI_DMA { 0x80, 0x81 }
#define MMCI0_IRQ { IRQ_PBX_MMCI0A, IRQ_PBX_MMCI0B }
#define MMCI0_DMA { 0x84, 0 }
#define KMI0_IRQ { IRQ_PBX_KMI0, NO_IRQ }
#define KMI0_DMA { 0, 0 }
#define KMI1_IRQ { IRQ_PBX_KMI1, NO_IRQ }
#define KMI1_DMA { 0, 0 }
#define PBX_SMC_IRQ { NO_IRQ, NO_IRQ }
#define PBX_SMC_DMA { 0, 0 }
#define MPMC_IRQ { NO_IRQ, NO_IRQ }
#define MPMC_DMA { 0, 0 }
#define PBX_CLCD_IRQ { IRQ_PBX_CLCD, NO_IRQ }
#define PBX_CLCD_DMA { 0, 0 }
#define DMAC_IRQ { IRQ_PBX_DMAC, NO_IRQ }
#define DMAC_DMA { 0, 0 }
#define SCTL_IRQ { NO_IRQ, NO_IRQ }
#define SCTL_DMA { 0, 0 }
#define PBX_WATCHDOG_IRQ { IRQ_PBX_WATCHDOG, NO_IRQ }
#define PBX_WATCHDOG_DMA { 0, 0 }
#define PBX_GPIO0_IRQ { IRQ_PBX_GPIO0, NO_IRQ }
#define PBX_GPIO0_DMA { 0, 0 }
#define GPIO1_IRQ { IRQ_PBX_GPIO1, NO_IRQ }
#define GPIO1_DMA { 0, 0 }
#define PBX_RTC_IRQ { IRQ_PBX_RTC, NO_IRQ }
#define PBX_RTC_DMA { 0, 0 }
#define SCI_IRQ { IRQ_PBX_SCI, NO_IRQ }
#define SCI_DMA { 7, 6 }
#define PBX_UART0_IRQ { IRQ_PBX_UART0, NO_IRQ }
#define PBX_UART0_DMA { 15, 14 }
#define PBX_UART1_IRQ { IRQ_PBX_UART1, NO_IRQ }
#define PBX_UART1_DMA { 13, 12 }
#define PBX_UART2_IRQ { IRQ_PBX_UART2, NO_IRQ }
#define PBX_UART2_DMA { 11, 10 }
#define PBX_UART3_IRQ { IRQ_PBX_UART3, NO_IRQ }
#define PBX_UART3_DMA { 0x86, 0x87 }
#define PBX_SSP_IRQ { IRQ_PBX_SSP, NO_IRQ }
#define PBX_SSP_DMA { 9, 8 }
/* FPGA Primecells */
AMBA_DEVICE(aaci, "fpga:aaci", AACI, NULL);
AMBA_DEVICE(mmc0, "fpga:mmc0", MMCI0, &realview_mmc0_plat_data);
AMBA_DEVICE(kmi0, "fpga:kmi0", KMI0, NULL);
AMBA_DEVICE(kmi1, "fpga:kmi1", KMI1, NULL);
AMBA_DEVICE(uart3, "fpga:uart3", PBX_UART3, NULL);
/* DevChip Primecells */
AMBA_DEVICE(smc, "dev:smc", PBX_SMC, NULL);
AMBA_DEVICE(sctl, "dev:sctl", SCTL, NULL);
AMBA_DEVICE(wdog, "dev:wdog", PBX_WATCHDOG, NULL);
AMBA_DEVICE(gpio0, "dev:gpio0", PBX_GPIO0, &gpio0_plat_data);
AMBA_DEVICE(gpio1, "dev:gpio1", GPIO1, &gpio1_plat_data);
AMBA_DEVICE(gpio2, "dev:gpio2", GPIO2, &gpio2_plat_data);
AMBA_DEVICE(rtc, "dev:rtc", PBX_RTC, NULL);
AMBA_DEVICE(sci0, "dev:sci0", SCI, NULL);
AMBA_DEVICE(uart0, "dev:uart0", PBX_UART0, NULL);
AMBA_DEVICE(uart1, "dev:uart1", PBX_UART1, NULL);
AMBA_DEVICE(uart2, "dev:uart2", PBX_UART2, NULL);
AMBA_DEVICE(ssp0, "dev:ssp0", PBX_SSP, NULL);
/* Primecells on the NEC ISSP chip */
AMBA_DEVICE(clcd, "issp:clcd", PBX_CLCD, &clcd_plat_data);
AMBA_DEVICE(dmac, "issp:dmac", DMAC, NULL);
static struct amba_device *amba_devs[] __initdata = {
&dmac_device,
&uart0_device,
&uart1_device,
&uart2_device,
&uart3_device,
&smc_device,
&clcd_device,
&sctl_device,
&wdog_device,
&gpio0_device,
&gpio1_device,
&gpio2_device,
&rtc_device,
&sci0_device,
&ssp0_device,
&aaci_device,
&mmc0_device,
&kmi0_device,
&kmi1_device,
};
/*
* RealView PB-X platform devices
*/
static struct resource realview_pbx_flash_resources[] = {
[0] = {
.start = REALVIEW_PBX_FLASH0_BASE,
.end = REALVIEW_PBX_FLASH0_BASE + REALVIEW_PBX_FLASH0_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = REALVIEW_PBX_FLASH1_BASE,
.end = REALVIEW_PBX_FLASH1_BASE + REALVIEW_PBX_FLASH1_SIZE - 1,
.flags = IORESOURCE_MEM,
},
};
static struct resource realview_pbx_smsc911x_resources[] = {
[0] = {
.start = REALVIEW_PBX_ETH_BASE,
.end = REALVIEW_PBX_ETH_BASE + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PBX_ETH,
.end = IRQ_PBX_ETH,
.flags = IORESOURCE_IRQ,
},
};
static struct resource realview_pbx_isp1761_resources[] = {
[0] = {
.start = REALVIEW_PBX_USB_BASE,
.end = REALVIEW_PBX_USB_BASE + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_PBX_USB,
.end = IRQ_PBX_USB,
.flags = IORESOURCE_IRQ,
},
};
static void __init gic_init_irq(void)
{
/* ARM PBX on-board GIC */
if (core_tile_pbx11mp() || core_tile_pbxa9mp()) {
gic_cpu_base_addr = __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE);
gic_dist_init(0, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE),
29);
gic_cpu_init(0, __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE));
} else {
gic_cpu_base_addr = __io_address(REALVIEW_PBX_GIC_CPU_BASE);
gic_dist_init(0, __io_address(REALVIEW_PBX_GIC_DIST_BASE),
IRQ_PBX_GIC_START);
gic_cpu_init(0, __io_address(REALVIEW_PBX_GIC_CPU_BASE));
}
}
static void __init realview_pbx_timer_init(void)
{
timer0_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE);
timer1_va_base = __io_address(REALVIEW_PBX_TIMER0_1_BASE) + 0x20;
timer2_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE);
timer3_va_base = __io_address(REALVIEW_PBX_TIMER2_3_BASE) + 0x20;
#ifdef CONFIG_LOCAL_TIMERS
if (core_tile_pbx11mp() || core_tile_pbxa9mp())
twd_base = __io_address(REALVIEW_PBX_TILE_TWD_BASE);
#endif
realview_timer_init(IRQ_PBX_TIMER0_1);
}
static struct sys_timer realview_pbx_timer = {
.init = realview_pbx_timer_init,
};
static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags,
char **from, struct meminfo *meminfo)
{
#ifdef CONFIG_SPARSEMEM
/*
* Memory configuration with SPARSEMEM enabled on RealView PBX (see
* asm/mach/memory.h for more information).
*/
meminfo->bank[0].start = 0;
meminfo->bank[0].size = SZ_256M;
meminfo->bank[1].start = 0x20000000;
meminfo->bank[1].size = SZ_512M;
meminfo->bank[2].start = 0x80000000;
meminfo->bank[2].size = SZ_256M;
meminfo->nr_banks = 3;
#else
realview_fixup(mdesc, tags, from, meminfo);
#endif
}
static void realview_pbx_reset(char mode)
{
void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
/*
* To reset, we hit the on-board reset register
* in the system FPGA
*/
__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
__raw_writel(0x00F0, reset_ctrl);
__raw_writel(0x00F4, reset_ctrl);
}
static void __init realview_pbx_init(void)
{
int i;
#ifdef CONFIG_CACHE_L2X0
if (core_tile_pbxa9mp()) {
void __iomem *l2x0_base =
__io_address(REALVIEW_PBX_TILE_L220_BASE);
/* set RAM latencies to 1 cycle for eASIC */
writel(0, l2x0_base + L2X0_TAG_LATENCY_CTRL);
writel(0, l2x0_base + L2X0_DATA_LATENCY_CTRL);
/* 16KB way size, 8-way associativity, parity disabled
* Bits: .. 0 0 0 0 1 00 1 0 1 001 0 000 0 .... .... .... */
l2x0_init(l2x0_base, 0x02520000, 0xc0000fff);
}
#endif
realview_flash_register(realview_pbx_flash_resources,
ARRAY_SIZE(realview_pbx_flash_resources));
realview_eth_register(NULL, realview_pbx_smsc911x_resources);
platform_device_register(&realview_i2c_device);
platform_device_register(&realview_cf_device);
realview_usb_register(realview_pbx_isp1761_resources);
for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
struct amba_device *d = amba_devs[i];
amba_device_register(d, &iomem_resource);
}
#ifdef CONFIG_LEDS
leds_event = realview_leds_event;
#endif
realview_reset = realview_pbx_reset;
}
MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
/* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */
.phys_io = REALVIEW_PBX_UART0_BASE,
.io_pg_offst = (IO_ADDRESS(REALVIEW_PBX_UART0_BASE) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100,
.fixup = realview_pbx_fixup,
.map_io = realview_pbx_map_io,
.init_irq = gic_init_irq,
.timer = &realview_pbx_timer,
.init_machine = realview_pbx_init,
MACHINE_END
