/*
* Hardware definitions for Palm Tungsten|T5
*
* Author: Marek Vasut <marek.vasut@gmail.com>
*
* Based on work of:
* Ales Snuparek <snuparek@atlas.cz>
* Justin Kendrick <twilightsentry@gmail.com>
* RichardT5 <richard_t5@users.sourceforge.net>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* (find more info at www.hackndev.com)
*
*/
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/irq.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/pda_power.h>
#include <linux/pwm_backlight.h>
#include <linux/gpio.h>
#include <linux/wm97xx_batt.h>
#include <linux/power_supply.h>
#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/pxa27x.h>
#include <mach/audio.h>
#include <mach/palmt5.h>
#include <mach/mmc.h>
#include <mach/pxafb.h>
#include <mach/irda.h>
#include <mach/pxa27x_keypad.h>
#include <mach/udc.h>
#include <mach/palmasoc.h>
#include "generic.h"
#include "devices.h"
/******************************************************************************
* Pin configuration
******************************************************************************/
static unsigned long palmt5_pin_config[] __initdata = {
/* MMC */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
GPIO14_GPIO, /* SD detect */
GPIO114_GPIO, /* SD power */
GPIO115_GPIO, /* SD r/o switch */
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
GPIO89_AC97_SYSCLK,
GPIO95_AC97_nRESET,
/* IrDA */
GPIO40_GPIO, /* ir disable */
GPIO46_FICP_RXD,
GPIO47_FICP_TXD,
/* USB */
GPIO15_GPIO, /* usb detect */
GPIO93_GPIO, /* usb power */
/* MATRIX KEYPAD */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
/* LCD */
GPIO58_LCD_LDD_0,
GPIO59_LCD_LDD_1,
GPIO60_LCD_LDD_2,
GPIO61_LCD_LDD_3,
GPIO62_LCD_LDD_4,
GPIO63_LCD_LDD_5,
GPIO64_LCD_LDD_6,
GPIO65_LCD_LDD_7,
GPIO66_LCD_LDD_8,
GPIO67_LCD_LDD_9,
GPIO68_LCD_LDD_10,
GPIO69_LCD_LDD_11,
GPIO70_LCD_LDD_12,
GPIO71_LCD_LDD_13,
GPIO72_LCD_LDD_14,
GPIO73_LCD_LDD_15,
GPIO74_LCD_FCLK,
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
GPIO77_LCD_BIAS,
/* PWM */
GPIO16_PWM0_OUT,
/* FFUART */
GPIO34_FFUART_RXD,
GPIO39_FFUART_TXD,
/* MISC */
GPIO10_GPIO, /* hotsync button */
GPIO90_GPIO, /* power detect */
GPIO107_GPIO, /* earphone detect */
};
/******************************************************************************
* SD/MMC card controller
******************************************************************************/
static struct pxamci_platform_data palmt5_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
.gpio_card_detect = GPIO_NR_PALMT5_SD_DETECT_N,
.gpio_card_ro = GPIO_NR_PALMT5_SD_READONLY,
.gpio_power = GPIO_NR_PALMT5_SD_POWER,
.detect_delay = 20,
};
/******************************************************************************
* GPIO keyboard
******************************************************************************/
static unsigned int palmt5_matrix_keys[] = {
KEY(0, 0, KEY_POWER),
KEY(0, 1, KEY_F1),
KEY(0, 2, KEY_ENTER),
KEY(1, 0, KEY_F2),
KEY(1, 1, KEY_F3),
KEY(1, 2, KEY_F4),
KEY(2, 0, KEY_UP),
KEY(2, 2, KEY_DOWN),
KEY(3, 0, KEY_RIGHT),
KEY(3, 2, KEY_LEFT),
};
static struct pxa27x_keypad_platform_data palmt5_keypad_platform_data = {
.matrix_key_rows = 4,
.matrix_key_cols = 3,
.matrix_key_map = palmt5_matrix_keys,
.matrix_key_map_size = ARRAY_SIZE(palmt5_matrix_keys),
.debounce_interval = 30,
};
/******************************************************************************
* GPIO keys
******************************************************************************/
static struct gpio_keys_button palmt5_pxa_buttons[] = {
{KEY_F8, GPIO_NR_PALMT5_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
};
static struct gpio_keys_platform_data palmt5_pxa_keys_data = {
.buttons = palmt5_pxa_buttons,
.nbuttons = ARRAY_SIZE(palmt5_pxa_buttons),
};
static struct platform_device palmt5_pxa_keys = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &palmt5_pxa_keys_data,
},
};
/******************************************************************************
* Backlight
******************************************************************************/
static int palmt5_backlight_init(struct device *dev)
{
int ret;
ret = gpio_request(GPIO_NR_PALMT5_BL_POWER, "BL POWER");
if (ret)
goto err;
ret = gpio_direction_output(GPIO_NR_PALMT5_BL_POWER, 0);
if (ret)
goto err2;
ret = gpio_request(GPIO_NR_PALMT5_LCD_POWER, "LCD POWER");
if (ret)
goto err2;
ret = gpio_direction_output(GPIO_NR_PALMT5_LCD_POWER, 0);
if (ret)
goto err3;
return 0;
err3:
gpio_free(GPIO_NR_PALMT5_LCD_POWER);
err2:
gpio_free(GPIO_NR_PALMT5_BL_POWER);
err:
return ret;
}
static int palmt5_backlight_notify(struct device *dev, int brightness)
{
gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness);
gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness);
return brightness;
}
static void palmt5_backlight_exit(struct device *dev)
{
gpio_free(GPIO_NR_PALMT5_BL_POWER);
gpio_free(GPIO_NR_PALMT5_LCD_POWER);
}
static struct platform_pwm_backlight_data palmt5_backlight_data = {
.pwm_id = 0,
.max_brightness = PALMT5_MAX_INTENSITY,
.dft_brightness = PALMT5_MAX_INTENSITY,
.pwm_period_ns = PALMT5_PERIOD_NS,
.init = palmt5_backlight_init,
.notify = palmt5_backlight_notify,
.exit = palmt5_backlight_exit,
};
static struct platform_device palmt5_backlight = {
.name = "pwm-backlight",
.dev = {
.parent = &pxa27x_device_pwm0.dev,
.platform_data = &palmt5_backlight_data,
},
};
/******************************************************************************
* IrDA
******************************************************************************/
static struct pxaficp_platform_data palmt5_ficp_platform_data = {
.gpio_pwdown = GPIO_NR_PALMT5_IR_DISABLE,
.transceiver_cap = IR_SIRMODE | IR_OFF,
};
/******************************************************************************
* UDC
******************************************************************************/
static struct gpio_vbus_mach_info palmt5_udc_info = {
.gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N,
.gpio_vbus_inverted = 1,
.gpio_pullup = GPIO_NR_PALMT5_USB_PULLUP,
};
static struct platform_device palmt5_gpio_vbus = {
.name = "gpio-vbus",
.id = -1,
.dev = {
.platform_data = &palmt5_udc_info,
},
};
/******************************************************************************
* Power supply
******************************************************************************/
static int power_supply_init(struct device *dev)
{
int ret;
ret = gpio_request(GPIO_NR_PALMT5_POWER_DETECT, "CABLE_STATE_AC");
if (ret)
goto err1;
ret = gpio_direction_input(GPIO_NR_PALMT5_POWER_DETECT);
if (ret)
goto err2;
return 0;
err2:
gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
err1:
return ret;
}
static int palmt5_is_ac_online(void)
{
return gpio_get_value(GPIO_NR_PALMT5_POWER_DETECT);
}
static void power_supply_exit(struct device *dev)
{
gpio_free(GPIO_NR_PALMT5_POWER_DETECT);
}
static char *palmt5_supplicants[] = {
"main-battery",
};
static struct pda_power_pdata power_supply_info = {
.init = power_supply_init,
.is_ac_online = palmt5_is_ac_online,
.exit = power_supply_exit,
.supplied_to = palmt5_supplicants,
.num_supplicants = ARRAY_SIZE(palmt5_supplicants),
};
static struct platform_device power_supply = {
.name = "pda-power",
.id = -1,
.dev = {
.platform_data = &power_supply_info,
},
};
/******************************************************************************
* WM97xx battery
******************************************************************************/
static struct wm97xx_batt_info wm97xx_batt_pdata = {
.batt_aux = WM97XX_AUX_ID3,
.temp_aux = WM97XX_AUX_ID2,
.charge_gpio = -1,
.max_voltage = PALMT5_BAT_MAX_VOLTAGE,
.min_voltage = PALMT5_BAT_MIN_VOLTAGE,
.batt_mult = 1000,
.batt_div = 414,
.temp_mult = 1,
.temp_div = 1,
.batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO,
.batt_name = "main-batt",
};
/******************************************************************************
* aSoC audio
******************************************************************************/
static struct palm27x_asoc_info palmt5_asoc_pdata = {
.jack_gpio = GPIO_NR_PALMT5_EARPHONE_DETECT,
};
static pxa2xx_audio_ops_t palmt5_ac97_pdata = {
.reset_gpio = 95,
};
static struct platform_device palmt5_asoc = {
.name = "palm27x-asoc",
.id = -1,
.dev = {
.platform_data = &palmt5_asoc_pdata,
},
};
/******************************************************************************
* Framebuffer
******************************************************************************/
static struct pxafb_mode_info palmt5_lcd_modes[] = {
{
.pixclock = 57692,
.xres = 320,
.yres = 480,
.bpp = 16,
.left_margin = 32,
.right_margin = 1,
.upper_margin = 7,
.lower_margin = 1,
.hsync_len = 4,
.vsync_len = 1,
},
};
static struct pxafb_mach_info palmt5_lcd_screen = {
.modes = palmt5_lcd_modes,
.num_modes = ARRAY_SIZE(palmt5_lcd_modes),
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
/******************************************************************************
* Power management - standby
******************************************************************************/
static void __init palmt5_pm_init(void)
{
static u32 resume[] = {
0xe3a00101, /* mov r0, #0x40000000 */
0xe380060f, /* orr r0, r0, #0x00f00000 */
0xe590f008, /* ldr pc, [r0, #0x08] */
};
/* copy the bootloader */
memcpy(phys_to_virt(PALMT5_STR_BASE), resume, sizeof(resume));
}
/******************************************************************************
* Machine init
******************************************************************************/
static struct platform_device *devices[] __initdata = {
#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
&palmt5_pxa_keys,
#endif
&palmt5_backlight,
&power_supply,
&palmt5_asoc,
&palmt5_gpio_vbus,
};
/* setup udc GPIOs initial state */
static void __init palmt5_udc_init(void)
{
if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) {
gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1);
gpio_free(GPIO_NR_PALMT5_USB_PULLUP);
}
}
static void __init palmt5_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
palmt5_pm_init();
set_pxa_fb_info(&palmt5_lcd_screen);
pxa_set_mci_info(&palmt5_mci_platform_data);
palmt5_udc_init();
pxa_set_ac97_info(&palmt5_ac97_pdata);
pxa_set_ficp_info(&palmt5_ficp_platform_data);
pxa_set_keypad_info(&palmt5_keypad_platform_data);
wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
MACHINE_START(PALMT5, "Palm Tungsten|T5")
.phys_io = PALMT5_PHYS_IO_START,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = palmt5_init
MACHINE_END
