/*
* ezx.c - Common code for the EZX platform.
*
* Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
* 2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
* 2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/pwm_backlight.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/leds-lp3944.h>
#include <media/soc_camera.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/pxa27x.h>
#include <mach/pxafb.h>
#include <mach/ohci.h>
#include <plat/i2c.h>
#include <mach/hardware.h>
#include <plat/pxa27x_keypad.h>
#include <mach/camera.h>
#include "devices.h"
#include "generic.h"
#define EZX_NR_IRQS (IRQ_BOARD_START + 24)
#define GPIO12_A780_FLIP_LID 12
#define GPIO15_A1200_FLIP_LID 15
#define GPIO15_A910_FLIP_LID 15
#define GPIO12_E680_LOCK_SWITCH 12
#define GPIO15_E6_LOCK_SWITCH 15
#define GPIO50_nCAM_EN 50
#define GPIO19_GEN1_CAM_RST 19
#define GPIO28_GEN2_CAM_RST 28
static struct platform_pwm_backlight_data ezx_backlight_data = {
.pwm_id = 0,
.max_brightness = 1023,
.dft_brightness = 1023,
.pwm_period_ns = 78770,
};
static struct platform_device ezx_backlight_device = {
.name = "pwm-backlight",
.dev = {
.parent = &pxa27x_device_pwm0.dev,
.platform_data = &ezx_backlight_data,
},
};
static struct pxafb_mode_info mode_ezx_old = {
.pixclock = 150000,
.xres = 240,
.yres = 320,
.bpp = 16,
.hsync_len = 10,
.left_margin = 20,
.right_margin = 10,
.vsync_len = 2,
.upper_margin = 3,
.lower_margin = 2,
.sync = 0,
};
static struct pxafb_mach_info ezx_fb_info_1 = {
.modes = &mode_ezx_old,
.num_modes = 1,
.lcd_conn = LCD_COLOR_TFT_16BPP,
};
static struct pxafb_mode_info mode_72r89803y01 = {
.pixclock = 192308,
.xres = 240,
.yres = 320,
.bpp = 32,
.depth = 18,
.hsync_len = 10,
.left_margin = 20,
.right_margin = 10,
.vsync_len = 2,
.upper_margin = 3,
.lower_margin = 2,
.sync = 0,
};
static struct pxafb_mach_info ezx_fb_info_2 = {
.modes = &mode_72r89803y01,
.num_modes = 1,
.lcd_conn = LCD_COLOR_TFT_18BPP,
};
static struct platform_device *ezx_devices[] __initdata = {
&ezx_backlight_device,
};
static unsigned long ezx_pin_config[] __initdata = {
/* PWM backlight */
GPIO16_PWM0_OUT,
/* BTUART */
GPIO42_BTUART_RXD,
GPIO43_BTUART_TXD,
GPIO44_BTUART_CTS,
GPIO45_BTUART_RTS,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* PCAP SSP */
GPIO29_SSP1_SCLK,
GPIO25_SSP1_TXD,
GPIO26_SSP1_RXD,
GPIO24_GPIO, /* pcap chip select */
GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* pcap interrupt */
GPIO4_GPIO | MFP_LPM_DRIVE_HIGH, /* WDI_AP */
GPIO55_GPIO | MFP_LPM_DRIVE_HIGH, /* SYS_RESTART */
/* MMC */
GPIO32_MMC_CLK,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
GPIO112_MMC_CMD,
GPIO11_GPIO, /* mmc detect */
/* usb to external transceiver */
GPIO34_USB_P2_2,
GPIO35_USB_P2_1,
GPIO36_USB_P2_4,
GPIO39_USB_P2_6,
GPIO40_USB_P2_5,
GPIO53_USB_P2_3,
/* usb to Neptune GSM chip */
GPIO30_USB_P3_2,
GPIO31_USB_P3_6,
GPIO90_USB_P3_5,
GPIO91_USB_P3_1,
GPIO56_USB_P3_4,
GPIO113_USB_P3_3,
};
#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
static unsigned long gen1_pin_config[] __initdata = {
/* flip / lockswitch */
GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
/* bluetooth (bcm2035) */
GPIO14_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
GPIO48_GPIO, /* RESET */
GPIO28_GPIO, /* WAKEUP */
/* Neptune handshake */
GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
GPIO57_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI */
GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI2 */
GPIO82_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
GPIO99_GPIO | MFP_LPM_DRIVE_HIGH, /* TC_MM_EN */
/* sound */
GPIO52_SSP3_SCLK,
GPIO83_SSP3_SFRM,
GPIO81_SSP3_TXD,
GPIO89_SSP3_RXD,
/* ssp2 pins to in */
GPIO22_GPIO, /* SSP2_SCLK */
GPIO37_GPIO, /* SSP2_SFRM */
GPIO38_GPIO, /* SSP2_TXD */
GPIO88_GPIO, /* SSP2_RXD */
/* camera */
GPIO23_CIF_MCLK,
GPIO54_CIF_PCLK,
GPIO85_CIF_LV,
GPIO84_CIF_FV,
GPIO27_CIF_DD_0,
GPIO114_CIF_DD_1,
GPIO51_CIF_DD_2,
GPIO115_CIF_DD_3,
GPIO95_CIF_DD_4,
GPIO94_CIF_DD_5,
GPIO17_CIF_DD_6,
GPIO108_CIF_DD_7,
GPIO50_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_EN */
GPIO19_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_RST */
/* EMU */
GPIO120_GPIO, /* EMU_MUX1 */
GPIO119_GPIO, /* EMU_MUX2 */
GPIO86_GPIO, /* SNP_INT_CTL */
GPIO87_GPIO, /* SNP_INT_IN */
};
#endif
#if defined(CONFIG_MACH_EZX_A1200) || defined(CONFIG_MACH_EZX_A910) || \
defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
static unsigned long gen2_pin_config[] __initdata = {
/* flip / lockswitch */
GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
/* EOC */
GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
/* bluetooth (bcm2045) */
GPIO13_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
GPIO37_GPIO, /* RESET */
GPIO57_GPIO, /* WAKEUP */
/* Neptune handshake */
GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* WDI */
GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
GPIO41_GPIO, /* BP_FLASH */
/* sound */
GPIO52_SSP3_SCLK,
GPIO83_SSP3_SFRM,
GPIO81_SSP3_TXD,
GPIO82_SSP3_RXD,
/* ssp2 pins to in */
GPIO22_GPIO, /* SSP2_SCLK */
GPIO14_GPIO, /* SSP2_SFRM */
GPIO38_GPIO, /* SSP2_TXD */
GPIO88_GPIO, /* SSP2_RXD */
/* camera */
GPIO23_CIF_MCLK,
GPIO54_CIF_PCLK,
GPIO85_CIF_LV,
GPIO84_CIF_FV,
GPIO27_CIF_DD_0,
GPIO114_CIF_DD_1,
GPIO51_CIF_DD_2,
GPIO115_CIF_DD_3,
GPIO95_CIF_DD_4,
GPIO48_CIF_DD_5,
GPIO93_CIF_DD_6,
GPIO12_CIF_DD_7,
GPIO50_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_EN */
GPIO28_GPIO | MFP_LPM_DRIVE_HIGH, /* CAM_RST */
GPIO17_GPIO, /* CAM_FLASH */
};
#endif
#ifdef CONFIG_MACH_EZX_A780
static unsigned long a780_pin_config[] __initdata = {
/* keypad */
GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
GPIO106_KP_MKOUT_3,
GPIO107_KP_MKOUT_4,
/* attenuate sound */
GPIO96_GPIO,
};
#endif
#ifdef CONFIG_MACH_EZX_E680
static unsigned long e680_pin_config[] __initdata = {
/* keypad */
GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO96_KP_DKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO97_KP_DKIN_4 | WAKEUP_ON_LEVEL_HIGH,
GPIO98_KP_DKIN_5 | WAKEUP_ON_LEVEL_HIGH,
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
GPIO106_KP_MKOUT_3,
/* MIDI */
GPIO79_GPIO, /* VA_SEL_BUL */
GPIO80_GPIO, /* FLT_SEL_BUL */
GPIO78_GPIO, /* MIDI_RESET */
GPIO33_GPIO, /* MIDI_CS */
GPIO15_GPIO, /* MIDI_IRQ */
GPIO49_GPIO, /* MIDI_NPWE */
GPIO18_GPIO, /* MIDI_RDY */
/* leds */
GPIO46_GPIO,
GPIO47_GPIO,
};
#endif
#ifdef CONFIG_MACH_EZX_A1200
static unsigned long a1200_pin_config[] __initdata = {
/* keypad */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
GPIO106_KP_MKOUT_3,
GPIO107_KP_MKOUT_4,
GPIO108_KP_MKOUT_5,
};
#endif
#ifdef CONFIG_MACH_EZX_A910
static unsigned long a910_pin_config[] __initdata = {
/* keypad */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
GPIO106_KP_MKOUT_3,
GPIO107_KP_MKOUT_4,
GPIO108_KP_MKOUT_5,
/* WLAN */
GPIO89_GPIO, /* RESET */
GPIO33_GPIO, /* WAKEUP */
GPIO94_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
/* MMC CS */
GPIO20_GPIO,
};
#endif
#ifdef CONFIG_MACH_EZX_E2
static unsigned long e2_pin_config[] __initdata = {
/* keypad */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
GPIO106_KP_MKOUT_3,
GPIO107_KP_MKOUT_4,
GPIO108_KP_MKOUT_5,
};
#endif
#ifdef CONFIG_MACH_EZX_E6
static unsigned long e6_pin_config[] __initdata = {
/* keypad */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
GPIO106_KP_MKOUT_3,
GPIO107_KP_MKOUT_4,
GPIO108_KP_MKOUT_5,
};
#endif
/* KEYPAD */
#ifdef CONFIG_MACH_EZX_A780
static unsigned int a780_key_map[] = {
KEY(0, 0, KEY_SEND),
KEY(0, 1, KEY_BACK),
KEY(0, 2, KEY_END),
KEY(0, 3, KEY_PAGEUP),
KEY(0, 4, KEY_UP),
KEY(1, 0, KEY_NUMERIC_1),
KEY(1, 1, KEY_NUMERIC_2),
KEY(1, 2, KEY_NUMERIC_3),
KEY(1, 3, KEY_SELECT),
KEY(1, 4, KEY_KPENTER),
KEY(2, 0, KEY_NUMERIC_4),
KEY(2, 1, KEY_NUMERIC_5),
KEY(2, 2, KEY_NUMERIC_6),
KEY(2, 3, KEY_RECORD),
KEY(2, 4, KEY_LEFT),
KEY(3, 0, KEY_NUMERIC_7),
KEY(3, 1, KEY_NUMERIC_8),
KEY(3, 2, KEY_NUMERIC_9),
KEY(3, 3, KEY_HOME),
KEY(3, 4, KEY_RIGHT),
KEY(4, 0, KEY_NUMERIC_STAR),
KEY(4, 1, KEY_NUMERIC_0),
KEY(4, 2, KEY_NUMERIC_POUND),
KEY(4, 3, KEY_PAGEDOWN),
KEY(4, 4, KEY_DOWN),
};
static struct pxa27x_keypad_platform_data a780_keypad_platform_data = {
.matrix_key_rows = 5,
.matrix_key_cols = 5,
.matrix_key_map = a780_key_map,
.matrix_key_map_size = ARRAY_SIZE(a780_key_map),
.direct_key_map = { KEY_CAMERA },
.direct_key_num = 1,
.debounce_interval = 30,
};
#endif /* CONFIG_MACH_EZX_A780 */
#ifdef CONFIG_MACH_EZX_E680
static unsigned int e680_key_map[] = {
KEY(0, 0, KEY_UP),
KEY(0, 1, KEY_RIGHT),
KEY(0, 2, KEY_RESERVED),
KEY(0, 3, KEY_SEND),
KEY(1, 0, KEY_DOWN),
KEY(1, 1, KEY_LEFT),
KEY(1, 2, KEY_PAGEUP),
KEY(1, 3, KEY_PAGEDOWN),
KEY(2, 0, KEY_RESERVED),
KEY(2, 1, KEY_RESERVED),
KEY(2, 2, KEY_RESERVED),
KEY(2, 3, KEY_KPENTER),
};
static struct pxa27x_keypad_platform_data e680_keypad_platform_data = {
.matrix_key_rows = 3,
.matrix_key_cols = 4,
.matrix_key_map = e680_key_map,
.matrix_key_map_size = ARRAY_SIZE(e680_key_map),
.direct_key_map = {
KEY_CAMERA,
KEY_RESERVED,
KEY_RESERVED,
KEY_F1,
KEY_CANCEL,
KEY_F2,
},
.direct_key_num = 6,
.debounce_interval = 30,
};
#endif /* CONFIG_MACH_EZX_E680 */
#ifdef CONFIG_MACH_EZX_A1200
static unsigned int a1200_key_map[] = {
KEY(0, 0, KEY_RESERVED),
KEY(0, 1, KEY_RIGHT),
KEY(0, 2, KEY_PAGEDOWN),
KEY(0, 3, KEY_RESERVED),
KEY(0, 4, KEY_RESERVED),
KEY(0, 5, KEY_RESERVED),
KEY(1, 0, KEY_RESERVED),
KEY(1, 1, KEY_DOWN),
KEY(1, 2, KEY_CAMERA),
KEY(1, 3, KEY_RESERVED),
KEY(1, 4, KEY_RESERVED),
KEY(1, 5, KEY_RESERVED),
KEY(2, 0, KEY_RESERVED),
KEY(2, 1, KEY_KPENTER),
KEY(2, 2, KEY_RECORD),
KEY(2, 3, KEY_RESERVED),
KEY(2, 4, KEY_RESERVED),
KEY(2, 5, KEY_SELECT),
KEY(3, 0, KEY_RESERVED),
KEY(3, 1, KEY_UP),
KEY(3, 2, KEY_SEND),
KEY(3, 3, KEY_RESERVED),
KEY(3, 4, KEY_RESERVED),
KEY(3, 5, KEY_RESERVED),
KEY(4, 0, KEY_RESERVED),
KEY(4, 1, KEY_LEFT),
KEY(4, 2, KEY_PAGEUP),
KEY(4, 3, KEY_RESERVED),
KEY(4, 4, KEY_RESERVED),
KEY(4, 5, KEY_RESERVED),
};
static struct pxa27x_keypad_platform_data a1200_keypad_platform_data = {
.matrix_key_rows = 5,
.matrix_key_cols = 6,
.matrix_key_map = a1200_key_map,
.matrix_key_map_size = ARRAY_SIZE(a1200_key_map),
.debounce_interval = 30,
};
#endif /* CONFIG_MACH_EZX_A1200 */
#ifdef CONFIG_MACH_EZX_E6
static unsigned int e6_key_map[] = {
KEY(0, 0, KEY_RESERVED),
KEY(0, 1, KEY_RIGHT),
KEY(0, 2, KEY_PAGEDOWN),
KEY(0, 3, KEY_RESERVED),
KEY(0, 4, KEY_RESERVED),
KEY(0, 5, KEY_NEXTSONG),
KEY(1, 0, KEY_RESERVED),
KEY(1, 1, KEY_DOWN),
KEY(1, 2, KEY_PROG1),
KEY(1, 3, KEY_RESERVED),
KEY(1, 4, KEY_RESERVED),
KEY(1, 5, KEY_RESERVED),
KEY(2, 0, KEY_RESERVED),
KEY(2, 1, KEY_ENTER),
KEY(2, 2, KEY_CAMERA),
KEY(2, 3, KEY_RESERVED),
KEY(2, 4, KEY_RESERVED),
KEY(2, 5, KEY_WWW),
KEY(3, 0, KEY_RESERVED),
KEY(3, 1, KEY_UP),
KEY(3, 2, KEY_SEND),
KEY(3, 3, KEY_RESERVED),
KEY(3, 4, KEY_RESERVED),
KEY(3, 5, KEY_PLAYPAUSE),
KEY(4, 0, KEY_RESERVED),
KEY(4, 1, KEY_LEFT),
KEY(4, 2, KEY_PAGEUP),
KEY(4, 3, KEY_RESERVED),
KEY(4, 4, KEY_RESERVED),
KEY(4, 5, KEY_PREVIOUSSONG),
};
static struct pxa27x_keypad_platform_data e6_keypad_platform_data = {
.matrix_key_rows = 5,
.matrix_key_cols = 6,
.matrix_key_map = e6_key_map,
.matrix_key_map_size = ARRAY_SIZE(e6_key_map),
.debounce_interval = 30,
};
#endif /* CONFIG_MACH_EZX_E6 */
#ifdef CONFIG_MACH_EZX_A910
static unsigned int a910_key_map[] = {
KEY(0, 0, KEY_NUMERIC_6),
KEY(0, 1, KEY_RIGHT),
KEY(0, 2, KEY_PAGEDOWN),
KEY(0, 3, KEY_KPENTER),
KEY(0, 4, KEY_NUMERIC_5),
KEY(0, 5, KEY_CAMERA),
KEY(1, 0, KEY_NUMERIC_8),
KEY(1, 1, KEY_DOWN),
KEY(1, 2, KEY_RESERVED),
KEY(1, 3, KEY_F1), /* Left SoftKey */
KEY(1, 4, KEY_NUMERIC_STAR),
KEY(1, 5, KEY_RESERVED),
KEY(2, 0, KEY_NUMERIC_7),
KEY(2, 1, KEY_NUMERIC_9),
KEY(2, 2, KEY_RECORD),
KEY(2, 3, KEY_F2), /* Right SoftKey */
KEY(2, 4, KEY_BACK),
KEY(2, 5, KEY_SELECT),
KEY(3, 0, KEY_NUMERIC_2),
KEY(3, 1, KEY_UP),
KEY(3, 2, KEY_SEND),
KEY(3, 3, KEY_NUMERIC_0),
KEY(3, 4, KEY_NUMERIC_1),
KEY(3, 5, KEY_RECORD),
KEY(4, 0, KEY_NUMERIC_4),
KEY(4, 1, KEY_LEFT),
KEY(4, 2, KEY_PAGEUP),
KEY(4, 3, KEY_NUMERIC_POUND),
KEY(4, 4, KEY_NUMERIC_3),
KEY(4, 5, KEY_RESERVED),
};
static struct pxa27x_keypad_platform_data a910_keypad_platform_data = {
.matrix_key_rows = 5,
.matrix_key_cols = 6,
.matrix_key_map = a910_key_map,
.matrix_key_map_size = ARRAY_SIZE(a910_key_map),
.debounce_interval = 30,
};
#endif /* CONFIG_MACH_EZX_A910 */
#ifdef CONFIG_MACH_EZX_E2
static unsigned int e2_key_map[] = {
KEY(0, 0, KEY_NUMERIC_6),
KEY(0, 1, KEY_RIGHT),
KEY(0, 2, KEY_NUMERIC_9),
KEY(0, 3, KEY_NEXTSONG),
KEY(0, 4, KEY_NUMERIC_5),
KEY(0, 5, KEY_F1), /* Left SoftKey */
KEY(1, 0, KEY_NUMERIC_8),
KEY(1, 1, KEY_DOWN),
KEY(1, 2, KEY_RESERVED),
KEY(1, 3, KEY_PAGEUP),
KEY(1, 4, KEY_NUMERIC_STAR),
KEY(1, 5, KEY_F2), /* Right SoftKey */
KEY(2, 0, KEY_NUMERIC_7),
KEY(2, 1, KEY_KPENTER),
KEY(2, 2, KEY_RECORD),
KEY(2, 3, KEY_PAGEDOWN),
KEY(2, 4, KEY_BACK),
KEY(2, 5, KEY_NUMERIC_0),
KEY(3, 0, KEY_NUMERIC_2),
KEY(3, 1, KEY_UP),
KEY(3, 2, KEY_SEND),
KEY(3, 3, KEY_PLAYPAUSE),
KEY(3, 4, KEY_NUMERIC_1),
KEY(3, 5, KEY_SOUND), /* Music SoftKey */
KEY(4, 0, KEY_NUMERIC_4),
KEY(4, 1, KEY_LEFT),
KEY(4, 2, KEY_NUMERIC_POUND),
KEY(4, 3, KEY_PREVIOUSSONG),
KEY(4, 4, KEY_NUMERIC_3),
KEY(4, 5, KEY_RESERVED),
};
static struct pxa27x_keypad_platform_data e2_keypad_platform_data = {
.matrix_key_rows = 5,
.matrix_key_cols = 6,
.matrix_key_map = e2_key_map,
.matrix_key_map_size = ARRAY_SIZE(e2_key_map),
.debounce_interval = 30,
};
#endif /* CONFIG_MACH_EZX_E2 */
#ifdef CONFIG_MACH_EZX_A780
/* gpio_keys */
static struct gpio_keys_button a780_buttons[] = {
[0] = {
.code = SW_LID,
.gpio = GPIO12_A780_FLIP_LID,
.active_low = 0,
.desc = "A780 flip lid",
.type = EV_SW,
.wakeup = 1,
},
};
static struct gpio_keys_platform_data a780_gpio_keys_platform_data = {
.buttons = a780_buttons,
.nbuttons = ARRAY_SIZE(a780_buttons),
};
static struct platform_device a780_gpio_keys = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &a780_gpio_keys_platform_data,
},
};
/* camera */
static int a780_camera_init(void)
{
int err;
/*
* GPIO50_nCAM_EN is active low
* GPIO19_GEN1_CAM_RST is active on rising edge
*/
err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
if (err) {
pr_err("%s: Failed to request nCAM_EN\n", __func__);
goto fail;
}
err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
if (err) {
pr_err("%s: Failed to request CAM_RST\n", __func__);
goto fail_gpio_cam_rst;
}
gpio_direction_output(GPIO50_nCAM_EN, 1);
gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
return 0;
fail_gpio_cam_rst:
gpio_free(GPIO50_nCAM_EN);
fail:
return err;
}
static int a780_camera_power(struct device *dev, int on)
{
gpio_set_value(GPIO50_nCAM_EN, !on);
return 0;
}
static int a780_camera_reset(struct device *dev)
{
gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
msleep(10);
gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
return 0;
}
struct pxacamera_platform_data a780_pxacamera_platform_data = {
.flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
.mclk_10khz = 5000,
};
static struct i2c_board_info a780_camera_i2c_board_info = {
I2C_BOARD_INFO("mt9m111", 0x5d),
};
static struct soc_camera_link a780_iclink = {
.bus_id = 0,
.flags = SOCAM_SENSOR_INVERT_PCLK,
.i2c_adapter_id = 0,
.board_info = &a780_camera_i2c_board_info,
.power = a780_camera_power,
.reset = a780_camera_reset,
};
static struct platform_device a780_camera = {
.name = "soc-camera-pdrv",
.id = 0,
.dev = {
.platform_data = &a780_iclink,
},
};
static struct platform_device *a780_devices[] __initdata = {
&a780_gpio_keys,
};
static void __init a780_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
pxa_set_i2c_info(NULL);
set_pxa_fb_info(&ezx_fb_info_1);
pxa_set_keypad_info(&a780_keypad_platform_data);
if (a780_camera_init() == 0) {
pxa_set_camera_info(&a780_pxacamera_platform_data);
platform_device_register(&a780_camera);
}
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(a780_devices));
}
MACHINE_START(EZX_A780, "Motorola EZX A780")
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = a780_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_E680
/* gpio_keys */
static struct gpio_keys_button e680_buttons[] = {
[0] = {
.code = KEY_SCREENLOCK,
.gpio = GPIO12_E680_LOCK_SWITCH,
.active_low = 0,
.desc = "E680 lock switch",
.type = EV_KEY,
.wakeup = 1,
},
};
static struct gpio_keys_platform_data e680_gpio_keys_platform_data = {
.buttons = e680_buttons,
.nbuttons = ARRAY_SIZE(e680_buttons),
};
static struct platform_device e680_gpio_keys = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &e680_gpio_keys_platform_data,
},
};
static struct i2c_board_info __initdata e680_i2c_board_info[] = {
{ I2C_BOARD_INFO("tea5767", 0x81) },
};
static struct platform_device *e680_devices[] __initdata = {
&e680_gpio_keys,
};
static void __init e680_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
set_pxa_fb_info(&ezx_fb_info_1);
pxa_set_keypad_info(&e680_keypad_platform_data);
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(e680_devices));
}
MACHINE_START(EZX_E680, "Motorola EZX E680")
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = e680_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_A1200
/* gpio_keys */
static struct gpio_keys_button a1200_buttons[] = {
[0] = {
.code = SW_LID,
.gpio = GPIO15_A1200_FLIP_LID,
.active_low = 0,
.desc = "A1200 flip lid",
.type = EV_SW,
.wakeup = 1,
},
};
static struct gpio_keys_platform_data a1200_gpio_keys_platform_data = {
.buttons = a1200_buttons,
.nbuttons = ARRAY_SIZE(a1200_buttons),
};
static struct platform_device a1200_gpio_keys = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &a1200_gpio_keys_platform_data,
},
};
static struct i2c_board_info __initdata a1200_i2c_board_info[] = {
{ I2C_BOARD_INFO("tea5767", 0x81) },
};
static struct platform_device *a1200_devices[] __initdata = {
&a1200_gpio_keys,
};
static void __init a1200_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
set_pxa_fb_info(&ezx_fb_info_2);
pxa_set_keypad_info(&a1200_keypad_platform_data);
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(a1200_devices));
}
MACHINE_START(EZX_A1200, "Motorola EZX A1200")
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = a1200_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_A910
/* gpio_keys */
static struct gpio_keys_button a910_buttons[] = {
[0] = {
.code = SW_LID,
.gpio = GPIO15_A910_FLIP_LID,
.active_low = 0,
.desc = "A910 flip lid",
.type = EV_SW,
.wakeup = 1,
},
};
static struct gpio_keys_platform_data a910_gpio_keys_platform_data = {
.buttons = a910_buttons,
.nbuttons = ARRAY_SIZE(a910_buttons),
};
static struct platform_device a910_gpio_keys = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &a910_gpio_keys_platform_data,
},
};
/* camera */
static int a910_camera_init(void)
{
int err;
/*
* GPIO50_nCAM_EN is active low
* GPIO28_GEN2_CAM_RST is active on rising edge
*/
err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
if (err) {
pr_err("%s: Failed to request nCAM_EN\n", __func__);
goto fail;
}
err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
if (err) {
pr_err("%s: Failed to request CAM_RST\n", __func__);
goto fail_gpio_cam_rst;
}
gpio_direction_output(GPIO50_nCAM_EN, 1);
gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
return 0;
fail_gpio_cam_rst:
gpio_free(GPIO50_nCAM_EN);
fail:
return err;
}
static int a910_camera_power(struct device *dev, int on)
{
gpio_set_value(GPIO50_nCAM_EN, !on);
return 0;
}
static int a910_camera_reset(struct device *dev)
{
gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
msleep(10);
gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
return 0;
}
struct pxacamera_platform_data a910_pxacamera_platform_data = {
.flags = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
.mclk_10khz = 5000,
};
static struct i2c_board_info a910_camera_i2c_board_info = {
I2C_BOARD_INFO("mt9m111", 0x5d),
};
static struct soc_camera_link a910_iclink = {
.bus_id = 0,
.i2c_adapter_id = 0,
.board_info = &a910_camera_i2c_board_info,
.power = a910_camera_power,
.reset = a910_camera_reset,
};
static struct platform_device a910_camera = {
.name = "soc-camera-pdrv",
.id = 0,
.dev = {
.platform_data = &a910_iclink,
},
};
/* leds-lp3944 */
static struct lp3944_platform_data a910_lp3944_leds = {
.leds_size = LP3944_LEDS_MAX,
.leds = {
[0] = {
.name = "a910:red:",
.status = LP3944_LED_STATUS_OFF,
.type = LP3944_LED_TYPE_LED,
},
[1] = {
.name = "a910:green:",
.status = LP3944_LED_STATUS_OFF,
.type = LP3944_LED_TYPE_LED,
},
[2] {
.name = "a910:blue:",
.status = LP3944_LED_STATUS_OFF,
.type = LP3944_LED_TYPE_LED,
},
/* Leds 3 and 4 are used as display power switches */
[3] = {
.name = "a910::cli_display",
.status = LP3944_LED_STATUS_OFF,
.type = LP3944_LED_TYPE_LED_INVERTED
},
[4] = {
.name = "a910::main_display",
.status = LP3944_LED_STATUS_ON,
.type = LP3944_LED_TYPE_LED_INVERTED
},
[5] = { .type = LP3944_LED_TYPE_NONE },
[6] = {
.name = "a910::torch",
.status = LP3944_LED_STATUS_OFF,
.type = LP3944_LED_TYPE_LED,
},
[7] = {
.name = "a910::flash",
.status = LP3944_LED_STATUS_OFF,
.type = LP3944_LED_TYPE_LED_INVERTED,
},
},
};
static struct i2c_board_info __initdata a910_i2c_board_info[] = {
{
I2C_BOARD_INFO("lp3944", 0x60),
.platform_data = &a910_lp3944_leds,
},
};
static struct platform_device *a910_devices[] __initdata = {
&a910_gpio_keys,
};
static void __init a910_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
set_pxa_fb_info(&ezx_fb_info_2);
pxa_set_keypad_info(&a910_keypad_platform_data);
if (a910_camera_init() == 0) {
pxa_set_camera_info(&a910_pxacamera_platform_data);
platform_device_register(&a910_camera);
}
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(a910_devices));
}
MACHINE_START(EZX_A910, "Motorola EZX A910")
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = a910_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_E6
/* gpio_keys */
static struct gpio_keys_button e6_buttons[] = {
[0] = {
.code = KEY_SCREENLOCK,
.gpio = GPIO15_E6_LOCK_SWITCH,
.active_low = 0,
.desc = "E6 lock switch",
.type = EV_KEY,
.wakeup = 1,
},
};
static struct gpio_keys_platform_data e6_gpio_keys_platform_data = {
.buttons = e6_buttons,
.nbuttons = ARRAY_SIZE(e6_buttons),
};
static struct platform_device e6_gpio_keys = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &e6_gpio_keys_platform_data,
},
};
static struct i2c_board_info __initdata e6_i2c_board_info[] = {
{ I2C_BOARD_INFO("tea5767", 0x81) },
};
static struct platform_device *e6_devices[] __initdata = {
&e6_gpio_keys,
};
static void __init e6_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
set_pxa_fb_info(&ezx_fb_info_2);
pxa_set_keypad_info(&e6_keypad_platform_data);
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(e6_devices));
}
MACHINE_START(EZX_E6, "Motorola EZX E6")
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = e6_init,
MACHINE_END
#endif
#ifdef CONFIG_MACH_EZX_E2
static struct i2c_board_info __initdata e2_i2c_board_info[] = {
{ I2C_BOARD_INFO("tea5767", 0x81) },
};
static struct platform_device *e2_devices[] __initdata = {
};
static void __init e2_init(void)
{
pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
pxa_set_i2c_info(NULL);
i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
set_pxa_fb_info(&ezx_fb_info_2);
pxa_set_keypad_info(&e2_keypad_platform_data);
platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
platform_add_devices(ARRAY_AND_SIZE(e2_devices));
}
MACHINE_START(EZX_E2, "Motorola EZX E2")
.boot_params = 0xa0000100,
.map_io = pxa_map_io,
.nr_irqs = EZX_NR_IRQS,
.init_irq = pxa27x_init_irq,
.timer = &pxa_timer,
.init_machine = e2_init,
MACHINE_END
#endif
