/*
* arch/arm/mach-orion5x/ts78xx-setup.c
*
* Maintainer: Alexander Clouter <alex@digriz.org.uk>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sysfs.h>
#include <linux/platform_device.h>
#include <linux/mv643xx_eth.h>
#include <linux/ata_platform.h>
#include <linux/m48t86.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/timeriomem-rng.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <mach/orion5x.h>
#include "common.h"
#include "mpp.h"
#include "ts78xx-fpga.h"
/*****************************************************************************
* TS-78xx Info
****************************************************************************/
/*
* FPGA - lives where the PCI bus would be at ORION5X_PCI_MEM_PHYS_BASE
*/
#define TS78XX_FPGA_REGS_PHYS_BASE 0xe8000000
#define TS78XX_FPGA_REGS_VIRT_BASE 0xff900000
#define TS78XX_FPGA_REGS_SIZE SZ_1M
static struct ts78xx_fpga_data ts78xx_fpga = {
.id = 0,
.state = 1,
/* .supports = ... - populated by ts78xx_fpga_supports() */
};
/*****************************************************************************
* I/O Address Mapping
****************************************************************************/
static struct map_desc ts78xx_io_desc[] __initdata = {
{
.virtual = TS78XX_FPGA_REGS_VIRT_BASE,
.pfn = __phys_to_pfn(TS78XX_FPGA_REGS_PHYS_BASE),
.length = TS78XX_FPGA_REGS_SIZE,
.type = MT_DEVICE,
},
};
void __init ts78xx_map_io(void)
{
orion5x_map_io();
iotable_init(ts78xx_io_desc, ARRAY_SIZE(ts78xx_io_desc));
}
/*****************************************************************************
* Ethernet
****************************************************************************/
static struct mv643xx_eth_platform_data ts78xx_eth_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(0),
};
/*****************************************************************************
* SATA
****************************************************************************/
static struct mv_sata_platform_data ts78xx_sata_data = {
.n_ports = 2,
};
/*****************************************************************************
* RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c
****************************************************************************/
#define TS_RTC_CTRL (TS78XX_FPGA_REGS_VIRT_BASE | 0x808)
#define TS_RTC_DATA (TS78XX_FPGA_REGS_VIRT_BASE | 0x80c)
static unsigned char ts78xx_ts_rtc_readbyte(unsigned long addr)
{
writeb(addr, TS_RTC_CTRL);
return readb(TS_RTC_DATA);
}
static void ts78xx_ts_rtc_writebyte(unsigned char value, unsigned long addr)
{
writeb(addr, TS_RTC_CTRL);
writeb(value, TS_RTC_DATA);
}
static struct m48t86_ops ts78xx_ts_rtc_ops = {
.readbyte = ts78xx_ts_rtc_readbyte,
.writebyte = ts78xx_ts_rtc_writebyte,
};
static struct platform_device ts78xx_ts_rtc_device = {
.name = "rtc-m48t86",
.id = -1,
.dev = {
.platform_data = &ts78xx_ts_rtc_ops,
},
.num_resources = 0,
};
/*
* TS uses some of the user storage space on the RTC chip so see if it is
* present; as it's an optional feature at purchase time and not all boards
* will have it present
*
* I've used the method TS use in their rtc7800.c example for the detection
*
* TODO: track down a guinea pig without an RTC to see if we can work out a
* better RTC detection routine
*/
static int ts78xx_ts_rtc_load(void)
{
int rc;
unsigned char tmp_rtc0, tmp_rtc1;
tmp_rtc0 = ts78xx_ts_rtc_readbyte(126);
tmp_rtc1 = ts78xx_ts_rtc_readbyte(127);
ts78xx_ts_rtc_writebyte(0x00, 126);
ts78xx_ts_rtc_writebyte(0x55, 127);
if (ts78xx_ts_rtc_readbyte(127) == 0x55) {
ts78xx_ts_rtc_writebyte(0xaa, 127);
if (ts78xx_ts_rtc_readbyte(127) == 0xaa
&& ts78xx_ts_rtc_readbyte(126) == 0x00) {
ts78xx_ts_rtc_writebyte(tmp_rtc0, 126);
ts78xx_ts_rtc_writebyte(tmp_rtc1, 127);
if (ts78xx_fpga.supports.ts_rtc.init == 0) {
rc = platform_device_register(&ts78xx_ts_rtc_device);
if (!rc)
ts78xx_fpga.supports.ts_rtc.init = 1;
} else
rc = platform_device_add(&ts78xx_ts_rtc_device);
return rc;
}
}
return -ENODEV;
};
static void ts78xx_ts_rtc_unload(void)
{
platform_device_del(&ts78xx_ts_rtc_device);
}
/*****************************************************************************
* NAND Flash
****************************************************************************/
#define TS_NAND_CTRL (TS78XX_FPGA_REGS_VIRT_BASE | 0x800) /* VIRT */
#define TS_NAND_DATA (TS78XX_FPGA_REGS_PHYS_BASE | 0x804) /* PHYS */
/*
* hardware specific access to control-lines
*
* ctrl:
* NAND_NCE: bit 0 -> bit 2
* NAND_CLE: bit 1 -> bit 1
* NAND_ALE: bit 2 -> bit 0
*/
static void ts78xx_ts_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
struct nand_chip *this = mtd->priv;
if (ctrl & NAND_CTRL_CHANGE) {
unsigned char bits;
bits = (ctrl & NAND_NCE) << 2;
bits |= ctrl & NAND_CLE;
bits |= (ctrl & NAND_ALE) >> 2;
writeb((readb(TS_NAND_CTRL) & ~0x7) | bits, TS_NAND_CTRL);
}
if (cmd != NAND_CMD_NONE)
writeb(cmd, this->IO_ADDR_W);
}
static int ts78xx_ts_nand_dev_ready(struct mtd_info *mtd)
{
return readb(TS_NAND_CTRL) & 0x20;
}
const char *ts_nand_part_probes[] = { "cmdlinepart", NULL };
static struct mtd_partition ts78xx_ts_nand_parts[] = {
{
.name = "mbr",
.offset = 0,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_4M,
}, {
.name = "initrd",
.offset = MTDPART_OFS_APPEND,
.size = SZ_4M,
}, {
.name = "rootfs",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
}
};
static struct platform_nand_data ts78xx_ts_nand_data = {
.chip = {
.part_probe_types = ts_nand_part_probes,
.partitions = ts78xx_ts_nand_parts,
.nr_partitions = ARRAY_SIZE(ts78xx_ts_nand_parts),
.chip_delay = 15,
.options = NAND_USE_FLASH_BBT,
},
.ctrl = {
/*
* The HW ECC offloading functions, used to give about a 9%
* performance increase for 'dd if=/dev/mtdblockX' and 5% for
* nanddump. This all however was changed by git commit
* e6cf5df1838c28bb060ac45b5585e48e71bbc740 so now there is
* no performance advantage to be had so we no longer bother
*/
.cmd_ctrl = ts78xx_ts_nand_cmd_ctrl,
.dev_ready = ts78xx_ts_nand_dev_ready,
},
};
static struct resource ts78xx_ts_nand_resources = {
.start = TS_NAND_DATA,
.end = TS_NAND_DATA + 4,
.flags = IORESOURCE_IO,
};
static struct platform_device ts78xx_ts_nand_device = {
.name = "gen_nand",
.id = -1,
.dev = {
.platform_data = &ts78xx_ts_nand_data,
},
.resource = &ts78xx_ts_nand_resources,
.num_resources = 1,
};
static int ts78xx_ts_nand_load(void)
{
int rc;
if (ts78xx_fpga.supports.ts_nand.init == 0) {
rc = platform_device_register(&ts78xx_ts_nand_device);
if (!rc)
ts78xx_fpga.supports.ts_nand.init = 1;
} else
rc = platform_device_add(&ts78xx_ts_nand_device);
return rc;
};
static void ts78xx_ts_nand_unload(void)
{
platform_device_del(&ts78xx_ts_nand_device);
}
/*****************************************************************************
* HW RNG
****************************************************************************/
#define TS_RNG_DATA (TS78XX_FPGA_REGS_PHYS_BASE | 0x044)
static struct resource ts78xx_ts_rng_resource = {
.flags = IORESOURCE_MEM,
.start = TS_RNG_DATA,
.end = TS_RNG_DATA + 4 - 1,
};
static struct timeriomem_rng_data ts78xx_ts_rng_data = {
.period = 1000000, /* one second */
};
static struct platform_device ts78xx_ts_rng_device = {
.name = "timeriomem_rng",
.id = -1,
.dev = {
.platform_data = &ts78xx_ts_rng_data,
},
.resource = &ts78xx_ts_rng_resource,
.num_resources = 1,
};
static int ts78xx_ts_rng_load(void)
{
int rc;
if (ts78xx_fpga.supports.ts_rng.init == 0) {
rc = platform_device_register(&ts78xx_ts_rng_device);
if (!rc)
ts78xx_fpga.supports.ts_rng.init = 1;
} else
rc = platform_device_add(&ts78xx_ts_rng_device);
return rc;
};
static void ts78xx_ts_rng_unload(void)
{
platform_device_del(&ts78xx_ts_rng_device);
}
/*****************************************************************************
* FPGA 'hotplug' support code
****************************************************************************/
static void ts78xx_fpga_devices_zero_init(void)
{
ts78xx_fpga.supports.ts_rtc.init = 0;
ts78xx_fpga.supports.ts_nand.init = 0;
ts78xx_fpga.supports.ts_rng.init = 0;
}
static void ts78xx_fpga_supports(void)
{
/* TODO: put this 'table' into ts78xx-fpga.h */
switch (ts78xx_fpga.id) {
case TS7800_REV_1:
case TS7800_REV_2:
case TS7800_REV_3:
case TS7800_REV_4:
case TS7800_REV_5:
ts78xx_fpga.supports.ts_rtc.present = 1;
ts78xx_fpga.supports.ts_nand.present = 1;
ts78xx_fpga.supports.ts_rng.present = 1;
break;
default:
ts78xx_fpga.supports.ts_rtc.present = 0;
ts78xx_fpga.supports.ts_nand.present = 0;
ts78xx_fpga.supports.ts_rng.present = 0;
}
}
static int ts78xx_fpga_load_devices(void)
{
int tmp, ret = 0;
if (ts78xx_fpga.supports.ts_rtc.present == 1) {
tmp = ts78xx_ts_rtc_load();
if (tmp) {
printk(KERN_INFO "TS-78xx: RTC not registered\n");
ts78xx_fpga.supports.ts_rtc.present = 0;
}
ret |= tmp;
}
if (ts78xx_fpga.supports.ts_nand.present == 1) {
tmp = ts78xx_ts_nand_load();
if (tmp) {
printk(KERN_INFO "TS-78xx: NAND not registered\n");
ts78xx_fpga.supports.ts_nand.present = 0;
}
ret |= tmp;
}
if (ts78xx_fpga.supports.ts_rng.present == 1) {
tmp = ts78xx_ts_rng_load();
if (tmp) {
printk(KERN_INFO "TS-78xx: RNG not registered\n");
ts78xx_fpga.supports.ts_rng.present = 0;
}
ret |= tmp;
}
return ret;
}
static int ts78xx_fpga_unload_devices(void)
{
int ret = 0;
if (ts78xx_fpga.supports.ts_rtc.present == 1)
ts78xx_ts_rtc_unload();
if (ts78xx_fpga.supports.ts_nand.present == 1)
ts78xx_ts_nand_unload();
if (ts78xx_fpga.supports.ts_rng.present == 1)
ts78xx_ts_rng_unload();
return ret;
}
static int ts78xx_fpga_load(void)
{
ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
printk(KERN_INFO "TS-78xx FPGA: magic=0x%.6x, rev=0x%.2x\n",
(ts78xx_fpga.id >> 8) & 0xffffff,
ts78xx_fpga.id & 0xff);
ts78xx_fpga_supports();
if (ts78xx_fpga_load_devices()) {
ts78xx_fpga.state = -1;
return -EBUSY;
}
return 0;
};
static int ts78xx_fpga_unload(void)
{
unsigned int fpga_id;
fpga_id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
/*
* There does not seem to be a feasible way to block access to the GPIO
* pins from userspace (/dev/mem). This if clause should hopefully warn
* those foolish enough not to follow 'policy' :)
*
* UrJTAG SVN since r1381 can be used to reprogram the FPGA
*/
if (ts78xx_fpga.id != fpga_id) {
printk(KERN_ERR "TS-78xx FPGA: magic/rev mismatch\n"
"TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n",
(ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff,
(fpga_id >> 8) & 0xffffff, fpga_id & 0xff);
ts78xx_fpga.state = -1;
return -EBUSY;
}
if (ts78xx_fpga_unload_devices()) {
ts78xx_fpga.state = -1;
return -EBUSY;
}
return 0;
};
static ssize_t ts78xx_fpga_show(struct kobject *kobj,
struct kobj_attribute *attr, char *buf)
{
if (ts78xx_fpga.state < 0)
return sprintf(buf, "borked\n");
return sprintf(buf, "%s\n", (ts78xx_fpga.state) ? "online" : "offline");
}
static ssize_t ts78xx_fpga_store(struct kobject *kobj,
struct kobj_attribute *attr, const char *buf, size_t n)
{
int value, ret;
if (ts78xx_fpga.state < 0) {
printk(KERN_ERR "TS-78xx FPGA: borked, you must powercycle asap\n");
return -EBUSY;
}
if (strncmp(buf, "online", sizeof("online") - 1) == 0)
value = 1;
else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
value = 0;
else {
printk(KERN_ERR "ts78xx_fpga_store: Invalid value\n");
return -EINVAL;
}
if (ts78xx_fpga.state == value)
return n;
ret = (ts78xx_fpga.state == 0)
? ts78xx_fpga_load()
: ts78xx_fpga_unload();
if (!(ret < 0))
ts78xx_fpga.state = value;
return n;
}
static struct kobj_attribute ts78xx_fpga_attr =
__ATTR(ts78xx_fpga, 0644, ts78xx_fpga_show, ts78xx_fpga_store);
/*****************************************************************************
* General Setup
****************************************************************************/
static struct orion5x_mpp_mode ts78xx_mpp_modes[] __initdata = {
{ 0, MPP_UNUSED },
{ 1, MPP_GPIO }, /* JTAG Clock */
{ 2, MPP_GPIO }, /* JTAG Data In */
{ 3, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB2B */
{ 4, MPP_GPIO }, /* JTAG Data Out */
{ 5, MPP_GPIO }, /* JTAG TMS */
{ 6, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB31A_CLK4+ */
{ 7, MPP_GPIO }, /* Lat ECP2 256 FPGA - PB22B */
{ 8, MPP_UNUSED },
{ 9, MPP_UNUSED },
{ 10, MPP_UNUSED },
{ 11, MPP_UNUSED },
{ 12, MPP_UNUSED },
{ 13, MPP_UNUSED },
{ 14, MPP_UNUSED },
{ 15, MPP_UNUSED },
{ 16, MPP_UART },
{ 17, MPP_UART },
{ 18, MPP_UART },
{ 19, MPP_UART },
/*
* MPP[20] PCI Clock Out 1
* MPP[21] PCI Clock Out 0
* MPP[22] Unused
* MPP[23] Unused
* MPP[24] Unused
* MPP[25] Unused
*/
{ -1 },
};
static void __init ts78xx_init(void)
{
int ret;
/*
* Setup basic Orion functions. Need to be called early.
*/
orion5x_init();
orion5x_mpp_conf(ts78xx_mpp_modes);
/*
* Configure peripherals.
*/
orion5x_ehci0_init();
orion5x_ehci1_init();
orion5x_eth_init(&ts78xx_eth_data);
orion5x_sata_init(&ts78xx_sata_data);
orion5x_uart0_init();
orion5x_uart1_init();
orion5x_xor_init();
/* FPGA init */
ts78xx_fpga_devices_zero_init();
ret = ts78xx_fpga_load();
ret = sysfs_create_file(power_kobj, &ts78xx_fpga_attr.attr);
if (ret)
printk(KERN_ERR "sysfs_create_file failed: %d\n", ret);
}
MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
/* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
.phys_io = ORION5X_REGS_PHYS_BASE,
.io_pg_offst = ((ORION5X_REGS_VIRT_BASE) >> 18) & 0xFFFC,
.boot_params = 0x00000100,
.init_machine = ts78xx_init,
.map_io = ts78xx_map_io,
.init_irq = orion5x_init_irq,
.timer = &orion5x_timer,
MACHINE_END
