/*
* OMAP2xxx Power/Reset Management (PRM) register definitions
*
* Copyright (C) 2007-2009, 2011-2012 Texas Instruments, Inc.
* Copyright (C) 2008-2010 Nokia Corporation
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* The PRM hardware modules on the OMAP2/3 are quite similar to each
* other. The PRM on OMAP4 has a new register layout, and is handled
* in a separate file.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
#define __ARCH_ARM_MACH_OMAP2_PRM2XXX_H
#include "prcm-common.h"
#include "prm.h"
#include "prm2xxx_3xxx.h"
#define OMAP2420_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
#define OMAP2430_PRM_REGADDR(module, reg) \
OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
/*
* OMAP2-specific global PRM registers
* Use {read,write}l_relaxed() with these registers.
*
* With a few exceptions, these are the register names beginning with
* PRCM_* on 24xx. (The exceptions are the IRQSTATUS and IRQENABLE
* bits.)
*
*/
#define OMAP2_PRCM_REVISION_OFFSET 0x0000
#define OMAP2420_PRCM_REVISION OMAP2420_PRM_REGADDR(OCP_MOD, 0x0000)
#define OMAP2_PRCM_SYSCONFIG_OFFSET 0x0010
#define OMAP2420_PRCM_SYSCONFIG OMAP2420_PRM_REGADDR(OCP_MOD, 0x0010)
#define OMAP2_PRCM_IRQSTATUS_MPU_OFFSET 0x0018
#define OMAP2420_PRCM_IRQSTATUS_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x0018)
#define OMAP2_PRCM_IRQENABLE_MPU_OFFSET 0x001c
#define OMAP2420_PRCM_IRQENABLE_MPU OMAP2420_PRM_REGADDR(OCP_MOD, 0x001c)
#define OMAP2_PRCM_VOLTCTRL_OFFSET 0x0050
#define OMAP2420_PRCM_VOLTCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0050)
#define OMAP2_PRCM_VOLTST_OFFSET 0x0054
#define OMAP2420_PRCM_VOLTST OMAP2420_PRM_REGADDR(OCP_MOD, 0x0054)
#define OMAP2_PRCM_CLKSRC_CTRL_OFFSET 0x0060
#define OMAP2420_PRCM_CLKSRC_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0060)
#define OMAP2_PRCM_CLKOUT_CTRL_OFFSET 0x0070
#define OMAP2420_PRCM_CLKOUT_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0070)
#define OMAP2_PRCM_CLKEMUL_CTRL_OFFSET 0x0078
#define OMAP2420_PRCM_CLKEMUL_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0078)
#define OMAP2_PRCM_CLKCFG_CTRL_OFFSET 0x0080
#define OMAP2420_PRCM_CLKCFG_CTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0080)
#define OMAP2_PRCM_CLKCFG_STATUS_OFFSET 0x0084
#define OMAP2420_PRCM_CLKCFG_STATUS OMAP2420_PRM_REGADDR(OCP_MOD, 0x0084)
#define OMAP2_PRCM_VOLTSETUP_OFFSET 0x0090
#define OMAP2420_PRCM_VOLTSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0090)
#define OMAP2_PRCM_CLKSSETUP_OFFSET 0x0094
#define OMAP2420_PRCM_CLKSSETUP OMAP2420_PRM_REGADDR(OCP_MOD, 0x0094)
#define OMAP2_PRCM_POLCTRL_OFFSET 0x0098
#define OMAP2420_PRCM_POLCTRL OMAP2420_PRM_REGADDR(OCP_MOD, 0x0098)
#define OMAP2430_PRCM_REVISION OMAP2430_PRM_REGADDR(OCP_MOD, 0x0000)
#define OMAP2430_PRCM_SYSCONFIG OMAP2430_PRM_REGADDR(OCP_MOD, 0x0010)
#define OMAP2430_PRCM_IRQSTATUS_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x0018)
#define OMAP2430_PRCM_IRQENABLE_MPU OMAP2430_PRM_REGADDR(OCP_MOD, 0x001c)
#define OMAP2430_PRCM_VOLTCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0050)
#define OMAP2430_PRCM_VOLTST OMAP2430_PRM_REGADDR(OCP_MOD, 0x0054)
#define OMAP2430_PRCM_CLKSRC_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0060)
#define OMAP2430_PRCM_CLKOUT_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0070)
#define OMAP2430_PRCM_CLKEMUL_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0078)
#define OMAP2430_PRCM_CLKCFG_CTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0080)
#define OMAP2430_PRCM_CLKCFG_STATUS OMAP2430_PRM_REGADDR(OCP_MOD, 0x0084)
#define OMAP2430_PRCM_VOLTSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0090)
#define OMAP2430_PRCM_CLKSSETUP OMAP2430_PRM_REGADDR(OCP_MOD, 0x0094)
#define OMAP2430_PRCM_POLCTRL OMAP2430_PRM_REGADDR(OCP_MOD, 0x0098)
/*
* Module specific PRM register offsets from PRM_BASE + domain offset
*
* Use prm_{read,write}_mod_reg() with these registers.
*
* With a few exceptions, these are the register names beginning with
* {PM,RM}_* on both OMAP2/3 SoC families.. (The exceptions are the
* IRQSTATUS and IRQENABLE bits.)
*/
/* Register offsets appearing on both OMAP2 and OMAP3 */
#define OMAP2_RM_RSTCTRL 0x0050
#define OMAP2_RM_RSTTIME 0x0054
#define OMAP2_RM_RSTST 0x0058
#define OMAP2_PM_PWSTCTRL 0x00e0
#define OMAP2_PM_PWSTST 0x00e4
#define PM_WKEN 0x00a0
#define PM_WKEN1 PM_WKEN
#define PM_WKST 0x00b0
#define PM_WKST1 PM_WKST
#define PM_WKDEP 0x00c8
#define PM_EVGENCTRL 0x00d4
#define PM_EVGENONTIM 0x00d8
#define PM_EVGENOFFTIM 0x00dc
/* OMAP2xxx specific register offsets */
#define OMAP24XX_PM_WKEN2 0x00a4
#define OMAP24XX_PM_WKST2 0x00b4
#define OMAP24XX_PRCM_IRQSTATUS_DSP 0x00f0 /* IVA mod */
#define OMAP24XX_PRCM_IRQENABLE_DSP 0x00f4 /* IVA mod */
#define OMAP24XX_PRCM_IRQSTATUS_IVA 0x00f8
#define OMAP24XX_PRCM_IRQENABLE_IVA 0x00fc
#ifndef __ASSEMBLER__
/* Function prototypes */
extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
extern void omap2xxx_prm_dpll_reset(void);
extern int __init omap2xxx_prm_init(void);
#endif
#endif
