/*
* linux/arch/arm/mach-omap1/board-sx1.c
*
* Modified from board-generic.c
*
* Support for the Siemens SX1 mobile phone.
*
* Original version : Vladimir Ananiev (Vovan888-at-gmail com)
*
* Maintainters : Vladimir Ananiev (aka Vovan888), Sergge
* oslik.ru
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/input.h>
#include <linux/platform_device.h>
#include <linux/notifier.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/types.h>
#include <linux/i2c.h>
#include <linux/errno.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <mach/gpio.h>
#include <plat/mux.h>
#include <plat/dma.h>
#include <plat/irda.h>
#include <plat/usb.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/common.h>
#include <plat/keypad.h>
#include <plat/board-sx1.h>
/* Write to I2C device */
int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
{
struct i2c_adapter *adap;
int err;
struct i2c_msg msg[1];
unsigned char data[2];
adap = i2c_get_adapter(0);
if (!adap)
return -ENODEV;
msg->addr = devaddr; /* I2C address of chip */
msg->flags = 0;
msg->len = 2;
msg->buf = data;
data[0] = regoffset; /* register num */
data[1] = value; /* register data */
err = i2c_transfer(adap, msg, 1);
i2c_put_adapter(adap);
if (err >= 0)
return 0;
return err;
}
/* Read from I2C device */
int sx1_i2c_read_byte(u8 devaddr, u8 regoffset, u8 *value)
{
struct i2c_adapter *adap;
int err;
struct i2c_msg msg[1];
unsigned char data[2];
adap = i2c_get_adapter(0);
if (!adap)
return -ENODEV;
msg->addr = devaddr; /* I2C address of chip */
msg->flags = 0;
msg->len = 1;
msg->buf = data;
data[0] = regoffset; /* register num */
err = i2c_transfer(adap, msg, 1);
msg->addr = devaddr; /* I2C address */
msg->flags = I2C_M_RD;
msg->len = 1;
msg->buf = data;
err = i2c_transfer(adap, msg, 1);
*value = data[0];
i2c_put_adapter(adap);
if (err >= 0)
return 0;
return err;
}
/* set keyboard backlight intensity */
int sx1_setkeylight(u8 keylight)
{
if (keylight > SOFIA_MAX_LIGHT_VAL)
keylight = SOFIA_MAX_LIGHT_VAL;
return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight);
}
/* get current keylight intensity */
int sx1_getkeylight(u8 * keylight)
{
return sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_KEYLIGHT_REG, keylight);
}
/* set LCD backlight intensity */
int sx1_setbacklight(u8 backlight)
{
if (backlight > SOFIA_MAX_LIGHT_VAL)
backlight = SOFIA_MAX_LIGHT_VAL;
return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG,
backlight);
}
/* get current LCD backlight intensity */
int sx1_getbacklight (u8 * backlight)
{
return sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_BACKLIGHT_REG,
backlight);
}
/* set LCD backlight power on/off */
int sx1_setmmipower(u8 onoff)
{
int err;
u8 dat = 0;
err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
if (err < 0)
return err;
if (onoff)
dat |= SOFIA_MMILIGHT_POWER;
else
dat &= ~SOFIA_MMILIGHT_POWER;
return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
}
/* set USB power on/off */
int sx1_setusbpower(u8 onoff)
{
int err;
u8 dat = 0;
err = sx1_i2c_read_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, &dat);
if (err < 0)
return err;
if (onoff)
dat |= SOFIA_USB_POWER;
else
dat &= ~SOFIA_USB_POWER;
return sx1_i2c_write_byte(SOFIA_I2C_ADDR, SOFIA_POWER1_REG, dat);
}
EXPORT_SYMBOL(sx1_setkeylight);
EXPORT_SYMBOL(sx1_getkeylight);
EXPORT_SYMBOL(sx1_setbacklight);
EXPORT_SYMBOL(sx1_getbacklight);
EXPORT_SYMBOL(sx1_setmmipower);
EXPORT_SYMBOL(sx1_setusbpower);
/*----------- Keypad -------------------------*/
static int sx1_keymap[] = {
KEY(5, 3, GROUP_0 | 117), /* camera Qt::Key_F17 */
KEY(0, 4, GROUP_0 | 114), /* voice memo Qt::Key_F14 */
KEY(1, 4, GROUP_2 | 114), /* voice memo */
KEY(2, 4, GROUP_3 | 114), /* voice memo */
KEY(0, 0, GROUP_1 | KEY_F12), /* red button Qt::Key_Hangup */
KEY(4, 3, GROUP_1 | KEY_LEFT),
KEY(2, 3, GROUP_1 | KEY_DOWN),
KEY(1, 3, GROUP_1 | KEY_RIGHT),
KEY(0, 3, GROUP_1 | KEY_UP),
KEY(3, 3, GROUP_1 | KEY_POWER), /* joystick press or Qt::Key_Select */
KEY(5, 0, GROUP_1 | KEY_1),
KEY(4, 0, GROUP_1 | KEY_2),
KEY(3, 0, GROUP_1 | KEY_3),
KEY(3, 4, GROUP_1 | KEY_4),
KEY(4, 4, GROUP_1 | KEY_5),
KEY(5, 4, GROUP_1 | KEY_KPASTERISK),/* "*" */
KEY(4, 1, GROUP_1 | KEY_6),
KEY(5, 1, GROUP_1 | KEY_7),
KEY(3, 1, GROUP_1 | KEY_8),
KEY(3, 2, GROUP_1 | KEY_9),
KEY(5, 2, GROUP_1 | KEY_0),
KEY(4, 2, GROUP_1 | 113), /* # F13 Toggle input method Qt::Key_F13 */
KEY(0, 1, GROUP_1 | KEY_F11), /* green button Qt::Key_Call */
KEY(1, 2, GROUP_1 | KEY_YEN), /* left soft Qt::Key_Context1 */
KEY(2, 2, GROUP_1 | KEY_F8), /* right soft Qt::Key_Back */
KEY(2, 1, GROUP_1 | KEY_LEFTSHIFT), /* shift */
KEY(1, 1, GROUP_1 | KEY_BACKSPACE), /* C (clear) */
KEY(0, 2, GROUP_1 | KEY_F7), /* menu Qt::Key_Menu */
0
};
static struct resource sx1_kp_resources[] = {
[0] = {
.start = INT_KEYBOARD,
.end = INT_KEYBOARD,
.flags = IORESOURCE_IRQ,
},
};
static struct omap_kp_platform_data sx1_kp_data = {
.rows = 6,
.cols = 6,
.keymap = sx1_keymap,
.keymapsize = ARRAY_SIZE(sx1_keymap),
.delay = 80,
};
static struct platform_device sx1_kp_device = {
.name = "omap-keypad",
.id = -1,
.dev = {
.platform_data = &sx1_kp_data,
},
.num_resources = ARRAY_SIZE(sx1_kp_resources),
.resource = sx1_kp_resources,
};
/*----------- IRDA -------------------------*/
static struct omap_irda_config sx1_irda_data = {
.transceiver_cap = IR_SIRMODE,
.rx_channel = OMAP_DMA_UART3_RX,
.tx_channel = OMAP_DMA_UART3_TX,
.dest_start = UART3_THR,
.src_start = UART3_RHR,
.tx_trigger = 0,
.rx_trigger = 0,
};
static struct resource sx1_irda_resources[] = {
[0] = {
.start = INT_UART3,
.end = INT_UART3,
.flags = IORESOURCE_IRQ,
},
};
static u64 irda_dmamask = 0xffffffff;
static struct platform_device sx1_irda_device = {
.name = "omapirda",
.id = 0,
.dev = {
.platform_data = &sx1_irda_data,
.dma_mask = &irda_dmamask,
},
.num_resources = ARRAY_SIZE(sx1_irda_resources),
.resource = sx1_irda_resources,
};
/*----------- MTD -------------------------*/
static struct mtd_partition sx1_partitions[] = {
/* bootloader (U-Boot, etc) in first sector */
{
.name = "bootloader",
.offset = 0x01800000,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* bootloader params in the next sector */
{
.name = "params",
.offset = MTDPART_OFS_APPEND,
.size = SZ_128K,
.mask_flags = 0,
},
/* kernel */
{
.name = "kernel",
.offset = MTDPART_OFS_APPEND,
.size = SZ_2M - 2 * SZ_128K,
.mask_flags = 0
},
/* file system */
{
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0
}
};
static struct flash_platform_data sx1_flash_data = {
.map_name = "cfi_probe",
.width = 2,
.parts = sx1_partitions,
.nr_parts = ARRAY_SIZE(sx1_partitions),
};
#ifdef CONFIG_SX1_OLD_FLASH
/* MTD Intel StrataFlash - old flashes */
static struct resource sx1_old_flash_resource[] = {
[0] = {
.start = OMAP_CS0_PHYS, /* Physical */
.end = OMAP_CS0_PHYS + SZ_16M - 1,,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = OMAP_CS1_PHYS,
.end = OMAP_CS1_PHYS + SZ_8M - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device sx1_flash_device = {
.name = "omapflash",
.id = 0,
.dev = {
.platform_data = &sx1_flash_data,
},
.num_resources = 2,
.resource = &sx1_old_flash_resource,
};
#else
/* MTD Intel 4000 flash - new flashes */
static struct resource sx1_new_flash_resource = {
.start = OMAP_CS0_PHYS,
.end = OMAP_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
};
static struct platform_device sx1_flash_device = {
.name = "omapflash",
.id = 0,
.dev = {
.platform_data = &sx1_flash_data,
},
.num_resources = 1,
.resource = &sx1_new_flash_resource,
};
#endif
/*----------- USB -------------------------*/
static struct omap_usb_config sx1_usb_config __initdata = {
.otg = 0,
.register_dev = 1,
.register_host = 0,
.hmc_mode = 0,
.pins[0] = 2,
.pins[1] = 0,
.pins[2] = 0,
};
/*----------- LCD -------------------------*/
static struct platform_device sx1_lcd_device = {
.name = "lcd_sx1",
.id = -1,
};
static struct omap_lcd_config sx1_lcd_config __initdata = {
.ctrl_name = "internal",
};
/*-----------------------------------------*/
static struct platform_device *sx1_devices[] __initdata = {
&sx1_flash_device,
&sx1_kp_device,
&sx1_lcd_device,
&sx1_irda_device,
};
/*-----------------------------------------*/
static struct omap_board_config_kernel sx1_config[] __initdata = {
{ OMAP_TAG_LCD, &sx1_lcd_config },
};
/*-----------------------------------------*/
static void __init omap_sx1_init(void)
{
/* mux pins for uarts */
omap_cfg_reg(UART1_TX);
omap_cfg_reg(UART1_RTS);
omap_cfg_reg(UART2_TX);
omap_cfg_reg(UART2_RTS);
omap_cfg_reg(UART3_TX);
omap_cfg_reg(UART3_RX);
platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));
omap_board_config = sx1_config;
omap_board_config_size = ARRAY_SIZE(sx1_config);
omap_serial_init();
omap_register_i2c_bus(1, 100, NULL, 0);
omap_usb_init(&sx1_usb_config);
sx1_mmc_init();
/* turn on USB power */
/* sx1_setusbpower(1); cant do it here because i2c is not ready */
gpio_request(1, "A_IRDA_OFF");
gpio_request(11, "A_SWITCH");
gpio_request(15, "A_USB_ON");
gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */
gpio_direction_output(11, 0); /*A_SWITCH = 0 */
gpio_direction_output(15, 0); /*A_USB_ON = 0 */
}
/*----------------------------------------*/
static void __init omap_sx1_init_irq(void)
{
omap1_init_common_hw();
omap_init_irq();
omap_gpio_init();
}
/*----------------------------------------*/
static void __init omap_sx1_map_io(void)
{
omap1_map_common_io();
}
MACHINE_START(SX1, "OMAP310 based Siemens SX1")
.phys_io = 0xfff00000,
.io_pg_offst = ((0xfef00000) >> 18) & 0xfffc,
.boot_params = 0x10000100,
.map_io = omap_sx1_map_io,
.init_irq = omap_sx1_init_irq,
.init_machine = omap_sx1_init,
.timer = &omap_timer,
MACHINE_END
