/*
* Copyright 2010 Freescale Semiconductor, Inc. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/clk.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/common.h>
#include <mach/iomux-mx28.h>
#include "devices-mx28.h"
#include "gpio.h"
#define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15)
#define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13)
static const iomux_cfg_t mx28evk_pads[] __initconst = {
/* duart */
MX28_PAD_PWM0__DUART_RX |
(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
MX28_PAD_PWM1__DUART_TX |
(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
/* fec0 */
MX28_PAD_ENET0_MDC__ENET0_MDC |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_ENET0_MDIO__ENET0_MDIO |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_ENET0_RX_EN__ENET0_RX_EN |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_ENET0_RXD0__ENET0_RXD0 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_ENET0_RXD1__ENET0_RXD1 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_ENET0_TX_EN__ENET0_TX_EN |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_ENET0_TXD0__ENET0_TXD0 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_ENET0_TXD1__ENET0_TXD1 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_ENET_CLK__CLKCTRL_ENET |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
/* fec1 */
MX28_PAD_ENET0_CRS__ENET1_RX_EN |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_ENET0_RXD2__ENET1_RXD0 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_ENET0_RXD3__ENET1_RXD1 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_ENET0_COL__ENET1_TX_EN |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_ENET0_TXD2__ENET1_TXD0 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
MX28_PAD_ENET0_TXD3__ENET1_TXD1 |
(MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
/* phy power line */
MX28_PAD_SSP1_DATA3__GPIO_2_15 |
(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
/* phy reset line */
MX28_PAD_ENET0_RX_CLK__GPIO_4_13 |
(MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
};
/* fec */
static void __init mx28evk_fec_reset(void)
{
int ret;
struct clk *clk;
/* Enable fec phy clock */
clk = clk_get_sys("pll2", NULL);
if (!IS_ERR(clk))
clk_enable(clk);
/* Power up fec phy */
ret = gpio_request(MX28EVK_FEC_PHY_POWER, "fec-phy-power");
if (ret) {
pr_err("Failed to request gpio fec-phy-%s: %d\n", "power", ret);
return;
}
ret = gpio_direction_output(MX28EVK_FEC_PHY_POWER, 0);
if (ret) {
pr_err("Failed to drive gpio fec-phy-%s: %d\n", "power", ret);
return;
}
/* Reset fec phy */
ret = gpio_request(MX28EVK_FEC_PHY_RESET, "fec-phy-reset");
if (ret) {
pr_err("Failed to request gpio fec-phy-%s: %d\n", "reset", ret);
return;
}
gpio_direction_output(MX28EVK_FEC_PHY_RESET, 0);
if (ret) {
pr_err("Failed to drive gpio fec-phy-%s: %d\n", "reset", ret);
return;
}
mdelay(1);
gpio_set_value(MX28EVK_FEC_PHY_RESET, 1);
}
static struct fec_platform_data mx28_fec_pdata[] = {
{
/* fec0 */
.phy = PHY_INTERFACE_MODE_RMII,
}, {
/* fec1 */
.phy = PHY_INTERFACE_MODE_RMII,
},
};
static void __init mx28evk_init(void)
{
mxs_iomux_setup_multiple_pads(mx28evk_pads, ARRAY_SIZE(mx28evk_pads));
mx28_add_duart();
mx28evk_fec_reset();
mx28_add_fec(0, &mx28_fec_pdata[0]);
mx28_add_fec(1, &mx28_fec_pdata[1]);
}
static void __init mx28evk_timer_init(void)
{
mx28_clocks_init();
}
static struct sys_timer mx28evk_timer = {
.init = mx28evk_timer_init,
};
MACHINE_START(MX28EVK, "Freescale MX28 EVK")
/* Maintainer: Freescale Semiconductor, Inc. */
.map_io = mx28_map_io,
.init_irq = mx28_init_irq,
.init_machine = mx28evk_init,
.timer = &mx28evk_timer,
MACHINE_END
