/*
* arch/arm/mach-mv78xx0/db78x00-bp-setup.c
*
* Marvell DB-78x00-BP Development Board Setup
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
#include <linux/mv643xx_eth.h>
#include <linux/ethtool.h>
#include <mach/mv78xx0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "common.h"
static struct mv643xx_eth_platform_data db78x00_ge00_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(8),
};
static struct mv643xx_eth_platform_data db78x00_ge01_data = {
.phy_addr = MV643XX_ETH_PHY_ADDR(9),
};
static struct mv643xx_eth_platform_data db78x00_ge10_data = {
.phy_addr = MV643XX_ETH_PHY_NONE,
.speed = SPEED_1000,
.duplex = DUPLEX_FULL,
};
static struct mv643xx_eth_platform_data db78x00_ge11_data = {
.phy_addr = MV643XX_ETH_PHY_NONE,
.speed = SPEED_1000,
.duplex = DUPLEX_FULL,
};
static struct mv_sata_platform_data db78x00_sata_data = {
.n_ports = 2,
};
static void __init db78x00_init(void)
{
/*
* Basic MV78xx0 setup. Needs to be called early.
*/
mv78xx0_init();
/*
* Partition on-chip peripherals between the two CPU cores.
*/
if (mv78xx0_core_index() == 0) {
mv78xx0_ehci0_init();
mv78xx0_ehci1_init();
mv78xx0_ehci2_init();
mv78xx0_ge00_init(&db78x00_ge00_data);
mv78xx0_ge01_init(&db78x00_ge01_data);
mv78xx0_ge10_init(&db78x00_ge10_data);
mv78xx0_ge11_init(&db78x00_ge11_data);
mv78xx0_sata_init(&db78x00_sata_data);
mv78xx0_uart0_init();
mv78xx0_uart2_init();
} else {
mv78xx0_uart1_init();
mv78xx0_uart3_init();
}
}
static int __init db78x00_pci_init(void)
{
if (machine_is_db78x00_bp()) {
/*
* Assign the x16 PCIe slot on the board to CPU core
* #0, and let CPU core #1 have the four x1 slots.
*/
if (mv78xx0_core_index() == 0)
mv78xx0_pcie_init(0, 1);
else
mv78xx0_pcie_init(1, 0);
}
return 0;
}
subsys_initcall(db78x00_pci_init);
MACHINE_START(DB78X00_BP, "Marvell DB-78x00-BP Development Board")
/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
.phys_io = MV78XX0_REGS_PHYS_BASE,
.io_pg_offst = ((MV78XX0_REGS_VIRT_BASE) >> 18) & 0xfffc,
.boot_params = 0x00000100,
.init_machine = db78x00_init,
.map_io = mv78xx0_map_io,
.init_irq = mv78xx0_init_irq,
.timer = &mv78xx0_timer,
MACHINE_END
