/* linux/arch/arm/mach-msm/board-trout-mddi.c
** Author: Brian Swetland <swetland@google.com>
*/
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/leds.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/system_info.h>
#include <mach/msm_fb.h>
#include <mach/vreg.h>
#include "board-trout.h"
#include "proc_comm.h"
#include "devices.h"
#define TROUT_DEFAULT_BACKLIGHT_BRIGHTNESS 255
#define MDDI_CLIENT_CORE_BASE 0x108000
#define LCD_CONTROL_BLOCK_BASE 0x110000
#define SPI_BLOCK_BASE 0x120000
#define I2C_BLOCK_BASE 0x130000
#define PWM_BLOCK_BASE 0x140000
#define GPIO_BLOCK_BASE 0x150000
#define SYSTEM_BLOCK1_BASE 0x160000
#define SYSTEM_BLOCK2_BASE 0x170000
#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24)
#define SYSCLKENA (MDDI_CLIENT_CORE_BASE|0x2C)
#define PWM0OFF (PWM_BLOCK_BASE|0x1C)
#define V_VDDE2E_VDD2_GPIO 0
#define MDDI_RST_N 82
#define MDDICAP0 (MDDI_CLIENT_CORE_BASE|0x00)
#define MDDICAP1 (MDDI_CLIENT_CORE_BASE|0x04)
#define MDDICAP2 (MDDI_CLIENT_CORE_BASE|0x08)
#define MDDICAP3 (MDDI_CLIENT_CORE_BASE|0x0C)
#define MDCAPCHG (MDDI_CLIENT_CORE_BASE|0x10)
#define MDCRCERC (MDDI_CLIENT_CORE_BASE|0x14)
#define TTBUSSEL (MDDI_CLIENT_CORE_BASE|0x18)
#define DPSET0 (MDDI_CLIENT_CORE_BASE|0x1C)
#define DPSET1 (MDDI_CLIENT_CORE_BASE|0x20)
#define DPSUS (MDDI_CLIENT_CORE_BASE|0x24)
#define DPRUN (MDDI_CLIENT_CORE_BASE|0x28)
#define SYSCKENA (MDDI_CLIENT_CORE_BASE|0x2C)
#define TESTMODE (MDDI_CLIENT_CORE_BASE|0x30)
#define FIFOMONI (MDDI_CLIENT_CORE_BASE|0x34)
#define INTMONI (MDDI_CLIENT_CORE_BASE|0x38)
#define MDIOBIST (MDDI_CLIENT_CORE_BASE|0x3C)
#define MDIOPSET (MDDI_CLIENT_CORE_BASE|0x40)
#define BITMAP0 (MDDI_CLIENT_CORE_BASE|0x44)
#define BITMAP1 (MDDI_CLIENT_CORE_BASE|0x48)
#define BITMAP2 (MDDI_CLIENT_CORE_BASE|0x4C)
#define BITMAP3 (MDDI_CLIENT_CORE_BASE|0x50)
#define BITMAP4 (MDDI_CLIENT_CORE_BASE|0x54)
#define SRST (LCD_CONTROL_BLOCK_BASE|0x00)
#define PORT_ENB (LCD_CONTROL_BLOCK_BASE|0x04)
#define START (LCD_CONTROL_BLOCK_BASE|0x08)
#define PORT (LCD_CONTROL_BLOCK_BASE|0x0C)
#define CMN (LCD_CONTROL_BLOCK_BASE|0x10)
#define GAMMA (LCD_CONTROL_BLOCK_BASE|0x14)
#define INTFLG (LCD_CONTROL_BLOCK_BASE|0x18)
#define INTMSK (LCD_CONTROL_BLOCK_BASE|0x1C)
#define MPLFBUF (LCD_CONTROL_BLOCK_BASE|0x20)
#define HDE_LEFT (LCD_CONTROL_BLOCK_BASE|0x24)
#define VDE_TOP (LCD_CONTROL_BLOCK_BASE|0x28)
#define PXL (LCD_CONTROL_BLOCK_BASE|0x30)
#define HCYCLE (LCD_CONTROL_BLOCK_BASE|0x34)
#define HSW (LCD_CONTROL_BLOCK_BASE|0x38)
#define HDE_START (LCD_CONTROL_BLOCK_BASE|0x3C)
#define HDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x40)
#define VCYCLE (LCD_CONTROL_BLOCK_BASE|0x44)
#define VSW (LCD_CONTROL_BLOCK_BASE|0x48)
#define VDE_START (LCD_CONTROL_BLOCK_BASE|0x4C)
#define VDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x50)
#define WAKEUP (LCD_CONTROL_BLOCK_BASE|0x54)
#define WSYN_DLY (LCD_CONTROL_BLOCK_BASE|0x58)
#define REGENB (LCD_CONTROL_BLOCK_BASE|0x5C)
#define VSYNIF (LCD_CONTROL_BLOCK_BASE|0x60)
#define WRSTB (LCD_CONTROL_BLOCK_BASE|0x64)
#define RDSTB (LCD_CONTROL_BLOCK_BASE|0x68)
#define ASY_DATA (LCD_CONTROL_BLOCK_BASE|0x6C)
#define ASY_DATB (LCD_CONTROL_BLOCK_BASE|0x70)
#define ASY_DATC (LCD_CONTROL_BLOCK_BASE|0x74)
#define ASY_DATD (LCD_CONTROL_BLOCK_BASE|0x78)
#define ASY_DATE (LCD_CONTROL_BLOCK_BASE|0x7C)
#define ASY_DATF (LCD_CONTROL_BLOCK_BASE|0x80)
#define ASY_DATG (LCD_CONTROL_BLOCK_BASE|0x84)
#define ASY_DATH (LCD_CONTROL_BLOCK_BASE|0x88)
#define ASY_CMDSET (LCD_CONTROL_BLOCK_BASE|0x8C)
#define SSICTL (SPI_BLOCK_BASE|0x00)
#define SSITIME (SPI_BLOCK_BASE|0x04)
#define SSITX (SPI_BLOCK_BASE|0x08)
#define SSIRX (SPI_BLOCK_BASE|0x0C)
#define SSIINTC (SPI_BLOCK_BASE|0x10)
#define SSIINTS (SPI_BLOCK_BASE|0x14)
#define SSIDBG1 (SPI_BLOCK_BASE|0x18)
#define SSIDBG2 (SPI_BLOCK_BASE|0x1C)
#define SSIID (SPI_BLOCK_BASE|0x20)
#define WKREQ (SYSTEM_BLOCK1_BASE|0x00)
#define CLKENB (SYSTEM_BLOCK1_BASE|0x04)
#define DRAMPWR (SYSTEM_BLOCK1_BASE|0x08)
#define INTMASK (SYSTEM_BLOCK1_BASE|0x0C)
#define GPIOSEL (SYSTEM_BLOCK2_BASE|0x00)
#define GPIODATA (GPIO_BLOCK_BASE|0x00)
#define GPIODIR (GPIO_BLOCK_BASE|0x04)
#define GPIOIS (GPIO_BLOCK_BASE|0x08)
#define GPIOIBE (GPIO_BLOCK_BASE|0x0C)
#define GPIOIEV (GPIO_BLOCK_BASE|0x10)
#define GPIOIE (GPIO_BLOCK_BASE|0x14)
#define GPIORIS (GPIO_BLOCK_BASE|0x18)
#define GPIOMIS (GPIO_BLOCK_BASE|0x1C)
#define GPIOIC (GPIO_BLOCK_BASE|0x20)
#define GPIOOMS (GPIO_BLOCK_BASE|0x24)
#define GPIOPC (GPIO_BLOCK_BASE|0x28)
#define GPIOID (GPIO_BLOCK_BASE|0x30)
#define SPI_WRITE(reg, val) \
{ SSITX, 0x00010000 | (((reg) & 0xff) << 8) | ((val) & 0xff) }, \
{ 0, 5 },
#define SPI_WRITE1(reg) \
{ SSITX, (reg) & 0xff }, \
{ 0, 5 },
struct mddi_table {
uint32_t reg;
uint32_t value;
};
static struct mddi_table mddi_toshiba_init_table[] = {
{ DPSET0, 0x09e90046 },
{ DPSET1, 0x00000118 },
{ DPSUS, 0x00000000 },
{ DPRUN, 0x00000001 },
{ 1, 14 }, /* msleep 14 */
{ SYSCKENA, 0x00000001 },
{ CLKENB, 0x0000A1EF }, /* # SYS.CLKENB # Enable clocks for each module (without DCLK , i2cCLK) */
{ GPIODATA, 0x02000200 }, /* # GPI .GPIODATA # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0 */
{ GPIODIR, 0x000030D }, /* 24D # GPI .GPIODIR # Select direction of GPIO port (0,2,3,6,9 output) */
{ GPIOSEL, 0/*0x00000173*/}, /* # SYS.GPIOSEL # GPIO port multiplexing control */
{ GPIOPC, 0x03C300C0 }, /* # GPI .GPIOPC # GPIO2,3 PD cut */
{ WKREQ, 0x00000000 }, /* # SYS.WKREQ # Wake-up request event is VSYNC alignment */
{ GPIOIBE, 0x000003FF },
{ GPIOIS, 0x00000000 },
{ GPIOIC, 0x000003FF },
{ GPIOIE, 0x00000000 },
{ GPIODATA, 0x00040004 }, /* # GPI .GPIODATA # eDRAM VD supply */
{ 1, 1 }, /* msleep 1 */
{ GPIODATA, 0x02040004 }, /* # GPI .GPIODATA # eDRAM VD supply */
{ DRAMPWR, 0x00000001 }, /* eDRAM power */
};
#define GPIOSEL_VWAKEINT (1U << 0)
#define INTMASK_VWAKEOUT (1U << 0)
static struct clk *gp_clk;
static int trout_new_backlight = 1;
static struct vreg *vreg_mddi_1v5;
static struct vreg *vreg_lcm_2v85;
static void trout_process_mddi_table(struct msm_mddi_client_data *client_data,
struct mddi_table *table, size_t count)
{
int i;
for (i = 0; i < count; i++) {
uint32_t reg = table[i].reg;
uint32_t value = table[i].value;
if (reg == 0)
udelay(value);
else if (reg == 1)
msleep(value);
else
client_data->remote_write(client_data, value, reg);
}
}
static int trout_mddi_toshiba_client_init(
struct msm_mddi_bridge_platform_data *bridge_data,
struct msm_mddi_client_data *client_data)
{
int panel_id;
client_data->auto_hibernate(client_data, 0);
trout_process_mddi_table(client_data, mddi_toshiba_init_table,
ARRAY_SIZE(mddi_toshiba_init_table));
client_data->auto_hibernate(client_data, 1);
panel_id = (client_data->remote_read(client_data, GPIODATA) >> 4) & 3;
if (panel_id > 1) {
printk(KERN_WARNING "unknown panel id at mddi_enable\n");
return -1;
}
return 0;
}
static int trout_mddi_toshiba_client_uninit(
struct msm_mddi_bridge_platform_data *bridge_data,
struct msm_mddi_client_data *client_data)
{
return 0;
}
static struct resource resources_msm_fb[] = {
{
.start = MSM_FB_BASE,
.end = MSM_FB_BASE + MSM_FB_SIZE,
.flags = IORESOURCE_MEM,
},
};
struct msm_mddi_bridge_platform_data toshiba_client_data = {
.init = trout_mddi_toshiba_client_init,
.uninit = trout_mddi_toshiba_client_uninit,
.fb_data = {
.xres = 320,
.yres = 480,
.width = 45,
.height = 67,
.output_format = 0,
},
};
static struct msm_mddi_platform_data mddi_pdata = {
.clk_rate = 122880000,
.fb_resource = resources_msm_fb,
.num_clients = 1,
.client_platform_data = {
{
.product_id = (0xd263 << 16 | 0),
.name = "mddi_c_d263_0000",
.id = 0,
.client_data = &toshiba_client_data,
.clk_rate = 0,
},
},
};
int __init trout_init_panel(void)
{
int rc;
if (!machine_is_trout())
return 0;
vreg_mddi_1v5 = vreg_get(0, "gp2");
if (IS_ERR(vreg_mddi_1v5))
return PTR_ERR(vreg_mddi_1v5);
vreg_lcm_2v85 = vreg_get(0, "gp4");
if (IS_ERR(vreg_lcm_2v85))
return PTR_ERR(vreg_lcm_2v85);
trout_new_backlight = system_rev >= 5;
if (trout_new_backlight) {
uint32_t config = PCOM_GPIO_CFG(27, 0, GPIO_OUTPUT,
GPIO_NO_PULL, GPIO_8MA);
msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
} else {
uint32_t config = PCOM_GPIO_CFG(27, 1, GPIO_OUTPUT,
GPIO_NO_PULL, GPIO_8MA);
msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
gp_clk = clk_get(NULL, "gp_clk");
if (IS_ERR(gp_clk)) {
printk(KERN_ERR "trout_init_panel: could not get gp"
"clock\n");
gp_clk = NULL;
}
rc = clk_set_rate(gp_clk, 19200000);
if (rc)
printk(KERN_ERR "trout_init_panel: set clock rate "
"failed\n");
}
rc = platform_device_register(&msm_device_mdp);
if (rc)
return rc;
msm_device_mddi0.dev.platform_data = &mddi_pdata;
return platform_device_register(&msm_device_mddi0);
}
device_initcall(trout_init_panel);
