/*
* Author: MontaVista Software, Inc.
* <source@mvista.com>
*
* Based on the OMAP devices.c
*
* 2005 (c) MontaVista Software, Inc. This file is licensed under the
* terms of the GNU General Public License version 2. This program is
* licensed "as is" without any warranty of any kind, whether express
* or implied.
*
* Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
* Copyright 2008 Sascha Hauer, kernel@pengutronix.de
* Copyright (c) 2008 Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
* Copyright (c) 2008 Darius Augulis <darius.augulis@teltonika.lt>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/dma-mapping.h>
#include <linux/serial.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/mmc.h>
#include "devices.h"
#if defined(CONFIG_ARCH_MX1)
static struct resource imx1_camera_resources[] = {
{
.start = 0x00224000,
.end = 0x00224010,
.flags = IORESOURCE_MEM,
}, {
.start = MX1_CSI_INT,
.end = MX1_CSI_INT,
.flags = IORESOURCE_IRQ,
},
};
static u64 imx1_camera_dmamask = DMA_BIT_MASK(32);
struct platform_device imx1_camera_device = {
.name = "mx1-camera",
.id = 0, /* This is used to put cameras on this interface */
.dev = {
.dma_mask = &imx1_camera_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = imx1_camera_resources,
.num_resources = ARRAY_SIZE(imx1_camera_resources),
};
static struct resource imx_rtc_resources[] = {
{
.start = 0x00204000,
.end = 0x00204024,
.flags = IORESOURCE_MEM,
}, {
.start = MX1_RTC_INT,
.end = MX1_RTC_INT,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_RTC_SAMINT,
.end = MX1_RTC_SAMINT,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_rtc_device = {
.name = "rtc-imx",
.id = 0,
.resource = imx_rtc_resources,
.num_resources = ARRAY_SIZE(imx_rtc_resources),
};
static struct resource imx_wdt_resources[] = {
{
.start = 0x00201000,
.end = 0x00201008,
.flags = IORESOURCE_MEM,
}, {
.start = MX1_WDT_INT,
.end = MX1_WDT_INT,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_wdt_device = {
.name = "imx-wdt",
.id = 0,
.resource = imx_wdt_resources,
.num_resources = ARRAY_SIZE(imx_wdt_resources),
};
static struct resource imx_usb_resources[] = {
{
.start = 0x00212000,
.end = 0x00212148,
.flags = IORESOURCE_MEM,
}, {
.start = MX1_USBD_INT0,
.end = MX1_USBD_INT0,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT1,
.end = MX1_USBD_INT1,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT2,
.end = MX1_USBD_INT2,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT3,
.end = MX1_USBD_INT3,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT4,
.end = MX1_USBD_INT4,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT5,
.end = MX1_USBD_INT5,
.flags = IORESOURCE_IRQ,
}, {
.start = MX1_USBD_INT6,
.end = MX1_USBD_INT6,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_usb_device = {
.name = "imx_udc",
.id = 0,
.num_resources = ARRAY_SIZE(imx_usb_resources),
.resource = imx_usb_resources,
};
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
{
.chip.label = "gpio-0",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR),
.irq = MX1_GPIO_INT_PORTA,
.virtual_irq_start = MXC_GPIO_IRQ_START,
}, {
.chip.label = "gpio-1",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x100),
.irq = MX1_GPIO_INT_PORTB,
.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
}, {
.chip.label = "gpio-2",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x200),
.irq = MX1_GPIO_INT_PORTC,
.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
}, {
.chip.label = "gpio-3",
.base = (void __iomem *)MX1_IO_ADDRESS(MX1_GPIO_BASE_ADDR + 0x300),
.irq = MX1_GPIO_INT_PORTD,
.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
}
};
int __init imx1_register_gpios(void)
{
return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
}
#endif
#if defined(CONFIG_MACH_MX21) || defined(CONFIG_MACH_MX27)
#ifdef CONFIG_MACH_MX27
static struct resource mx27_camera_resources[] = {
{
.start = MX27_CSI_BASE_ADDR,
.end = MX27_CSI_BASE_ADDR + 0x1f,
.flags = IORESOURCE_MEM,
}, {
.start = MX27_EMMA_PRP_BASE_ADDR,
.end = MX27_EMMA_PRP_BASE_ADDR + 0x1f,
.flags = IORESOURCE_MEM,
}, {
.start = MX27_INT_CSI,
.end = MX27_INT_CSI,
.flags = IORESOURCE_IRQ,
},{
.start = MX27_INT_EMMAPRP,
.end = MX27_INT_EMMAPRP,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device mx27_camera_device = {
.name = "mx2-camera",
.id = 0,
.num_resources = ARRAY_SIZE(mx27_camera_resources),
.resource = mx27_camera_resources,
.dev = {
.coherent_dma_mask = 0xffffffff,
},
};
#endif
/*
* General Purpose Timer
* - i.MX21: 3 timers
* - i.MX27: 6 timers
*/
#define DEFINE_IMX_GPT_DEVICE(n, baseaddr, irq) \
static struct resource timer ## n ##_resources[] = { \
{ \
.start = baseaddr, \
.end = baseaddr + SZ_4K - 1, \
.flags = IORESOURCE_MEM, \
}, { \
.start = irq, \
.end = irq, \
.flags = IORESOURCE_IRQ, \
} \
}; \
\
struct platform_device mxc_gpt ## n = { \
.name = "imx_gpt", \
.id = n, \
.num_resources = ARRAY_SIZE(timer ## n ## _resources), \
.resource = timer ## n ## _resources, \
}
/* We use gpt1 as system timer, so do not add a device for this one */
DEFINE_IMX_GPT_DEVICE(1, MX2x_GPT2_BASE_ADDR, MX2x_INT_GPT2);
DEFINE_IMX_GPT_DEVICE(2, MX2x_GPT3_BASE_ADDR, MX2x_INT_GPT3);
#ifdef CONFIG_MACH_MX27
DEFINE_IMX_GPT_DEVICE(3, MX27_GPT4_BASE_ADDR, MX27_INT_GPT4);
DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5);
DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6);
#endif
/* Watchdog: i.MX1 has seperate driver, i.MX21 and i.MX27 are equal */
static struct resource mxc_wdt_resources[] = {
{
.start = MX2x_WDOG_BASE_ADDR,
.end = MX2x_WDOG_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
struct platform_device mxc_wdt = {
.name = "imx2-wdt",
.id = 0,
.num_resources = ARRAY_SIZE(mxc_wdt_resources),
.resource = mxc_wdt_resources,
};
static struct resource mxc_w1_master_resources[] = {
{
.start = MX2x_OWIRE_BASE_ADDR,
.end = MX2x_OWIRE_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
struct platform_device mxc_w1_master_device = {
.name = "mxc_w1",
.id = 0,
.num_resources = ARRAY_SIZE(mxc_w1_master_resources),
.resource = mxc_w1_master_resources,
};
/*
* lcdc:
* - i.MX1: the basic controller
* - i.MX21: to be checked
* - i.MX27: like i.MX1, with slightly variations
*/
static struct resource mxc_fb[] = {
{
.start = MX2x_LCDC_BASE_ADDR,
.end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = MX2x_INT_LCDC,
.end = MX2x_INT_LCDC,
.flags = IORESOURCE_IRQ,
}
};
/* mxc lcd driver */
struct platform_device mxc_fb_device = {
.name = "imx-fb",
.id = 0,
.num_resources = ARRAY_SIZE(mxc_fb),
.resource = mxc_fb,
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
#ifdef CONFIG_MACH_MX27
static struct resource mxc_fec_resources[] = {
{
.start = MX27_FEC_BASE_ADDR,
.end = MX27_FEC_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = MX27_INT_FEC,
.end = MX27_INT_FEC,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device mxc_fec_device = {
.name = "fec",
.id = 0,
.num_resources = ARRAY_SIZE(mxc_fec_resources),
.resource = mxc_fec_resources,
};
#endif
static struct resource mxc_pwm_resources[] = {
{
.start = MX2x_PWM_BASE_ADDR,
.end = MX2x_PWM_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = MX2x_INT_PWM,
.end = MX2x_INT_PWM,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device mxc_pwm_device = {
.name = "mxc_pwm",
.id = 0,
.num_resources = ARRAY_SIZE(mxc_pwm_resources),
.resource = mxc_pwm_resources,
};
#define DEFINE_MXC_MMC_DEVICE(n, baseaddr, irq, dmareq) \
static struct resource mxc_sdhc_resources ## n[] = { \
{ \
.start = baseaddr, \
.end = baseaddr + SZ_4K - 1, \
.flags = IORESOURCE_MEM, \
}, { \
.start = irq, \
.end = irq, \
.flags = IORESOURCE_IRQ, \
}, { \
.start = dmareq, \
.end = dmareq, \
.flags = IORESOURCE_DMA, \
}, \
}; \
\
static u64 mxc_sdhc ## n ## _dmamask = DMA_BIT_MASK(32); \
\
struct platform_device mxc_sdhc_device ## n = { \
.name = "mxc-mmc", \
.id = n, \
.dev = { \
.dma_mask = &mxc_sdhc ## n ## _dmamask, \
.coherent_dma_mask = DMA_BIT_MASK(32), \
}, \
.num_resources = ARRAY_SIZE(mxc_sdhc_resources ## n), \
.resource = mxc_sdhc_resources ## n, \
}
DEFINE_MXC_MMC_DEVICE(0, MX2x_SDHC1_BASE_ADDR, MX2x_INT_SDHC1, MX2x_DMA_REQ_SDHC1);
DEFINE_MXC_MMC_DEVICE(1, MX2x_SDHC2_BASE_ADDR, MX2x_INT_SDHC2, MX2x_DMA_REQ_SDHC2);
#ifdef CONFIG_MACH_MX27
static struct resource otg_resources[] = {
{
.start = MX27_USBOTG_BASE_ADDR,
.end = MX27_USBOTG_BASE_ADDR + 0x1ff,
.flags = IORESOURCE_MEM,
}, {
.start = MX27_INT_USB3,
.end = MX27_INT_USB3,
.flags = IORESOURCE_IRQ,
},
};
static u64 otg_dmamask = DMA_BIT_MASK(32);
/* OTG gadget device */
struct platform_device mxc_otg_udc_device = {
.name = "fsl-usb2-udc",
.id = -1,
.dev = {
.dma_mask = &otg_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.resource = otg_resources,
.num_resources = ARRAY_SIZE(otg_resources),
};
/* OTG host */
struct platform_device mxc_otg_host = {
.name = "mxc-ehci",
.id = 0,
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
.dma_mask = &otg_dmamask,
},
.resource = otg_resources,
.num_resources = ARRAY_SIZE(otg_resources),
};
/* USB host 1 */
static u64 usbh1_dmamask = DMA_BIT_MASK(32);
static struct resource mxc_usbh1_resources[] = {
{
.start = MX27_USBOTG_BASE_ADDR + 0x200,
.end = MX27_USBOTG_BASE_ADDR + 0x3ff,
.flags = IORESOURCE_MEM,
}, {
.start = MX27_INT_USB1,
.end = MX27_INT_USB1,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device mxc_usbh1 = {
.name = "mxc-ehci",
.id = 1,
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
.dma_mask = &usbh1_dmamask,
},
.resource = mxc_usbh1_resources,
.num_resources = ARRAY_SIZE(mxc_usbh1_resources),
};
/* USB host 2 */
static u64 usbh2_dmamask = DMA_BIT_MASK(32);
static struct resource mxc_usbh2_resources[] = {
{
.start = MX27_USBOTG_BASE_ADDR + 0x400,
.end = MX27_USBOTG_BASE_ADDR + 0x5ff,
.flags = IORESOURCE_MEM,
}, {
.start = MX27_INT_USB2,
.end = MX27_INT_USB2,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device mxc_usbh2 = {
.name = "mxc-ehci",
.id = 2,
.dev = {
.coherent_dma_mask = DMA_BIT_MASK(32),
.dma_mask = &usbh2_dmamask,
},
.resource = mxc_usbh2_resources,
.num_resources = ARRAY_SIZE(mxc_usbh2_resources),
};
#endif
#define DEFINE_IMX_SSI_DMARES(_name, ssin, suffix) \
{ \
.name = _name, \
.start = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \
.end = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \
.flags = IORESOURCE_DMA, \
}
#define DEFINE_IMX_SSI_DEVICE(n, ssin, baseaddr, irq) \
static struct resource imx_ssi_resources ## n[] = { \
{ \
.start = MX2x_SSI ## ssin ## _BASE_ADDR, \
.end = MX2x_SSI ## ssin ## _BASE_ADDR + 0x6f, \
.flags = IORESOURCE_MEM, \
}, { \
.start = MX2x_INT_SSI1, \
.end = MX2x_INT_SSI1, \
.flags = IORESOURCE_IRQ, \
}, \
DEFINE_IMX_SSI_DMARES("tx0", ssin, TX0), \
DEFINE_IMX_SSI_DMARES("rx0", ssin, RX0), \
DEFINE_IMX_SSI_DMARES("tx1", ssin, TX1), \
DEFINE_IMX_SSI_DMARES("rx1", ssin, RX1), \
}; \
\
struct platform_device imx_ssi_device ## n = { \
.name = "imx-ssi", \
.id = n, \
.num_resources = ARRAY_SIZE(imx_ssi_resources ## n), \
.resource = imx_ssi_resources ## n, \
}
DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
/* GPIO port description */
#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq) \
{ \
.chip.label = "gpio-" #n, \
.irq = _irq, \
.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR + \
n * 0x100), \
.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32, \
}
#define DEFINE_MXC_GPIO_PORT(SOC, n) \
{ \
.chip.label = "gpio-" #n, \
.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR + \
n * 0x100), \
.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32, \
}
#define DEFINE_MXC_GPIO_PORTS(SOC, pfx) \
static struct mxc_gpio_port pfx ## _gpio_ports[] = { \
DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO), \
DEFINE_MXC_GPIO_PORT(SOC, 1), \
DEFINE_MXC_GPIO_PORT(SOC, 2), \
DEFINE_MXC_GPIO_PORT(SOC, 3), \
DEFINE_MXC_GPIO_PORT(SOC, 4), \
DEFINE_MXC_GPIO_PORT(SOC, 5), \
}
#ifdef CONFIG_MACH_MX21
DEFINE_MXC_GPIO_PORTS(MX21, imx21);
int __init imx21_register_gpios(void)
{
return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
}
#endif
#ifdef CONFIG_MACH_MX27
DEFINE_MXC_GPIO_PORTS(MX27, imx27);
int __init imx27_register_gpios(void)
{
return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
}
#endif
#ifdef CONFIG_MACH_MX21
static struct resource mx21_usbhc_resources[] = {
{
.start = MX21_USBOTG_BASE_ADDR,
.end = MX21_USBOTG_BASE_ADDR + SZ_8K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = MX21_INT_USBHOST,
.end = MX21_INT_USBHOST,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device mx21_usbhc_device = {
.name = "imx21-hcd",
.id = 0,
.dev = {
.dma_mask = &mx21_usbhc_device.dev.coherent_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(mx21_usbhc_resources),
.resource = mx21_usbhc_resources,
};
#endif
static struct resource imx_kpp_resources[] = {
{
.start = MX2x_KPP_BASE_ADDR,
.end = MX2x_KPP_BASE_ADDR + 0xf,
.flags = IORESOURCE_MEM
}, {
.start = MX2x_INT_KPP,
.end = MX2x_INT_KPP,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device imx_kpp_device = {
.name = "imx-keypad",
.id = -1,
.num_resources = ARRAY_SIZE(imx_kpp_resources),
.resource = imx_kpp_resources,
};
#endif
