VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 14
EXTRAVERSION =-rc4
NAME=Affluent Albatross
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
# More info can be located in ./README
# Comments in this file are targeted only to the developer, do not
# expect to learn how to build the kernel reading this file.
# Do not print "Entering directory ..."
MAKEFLAGS += --no-print-directory
# We are using a recursive build, so we need to do a little thinking
# to get the ordering right.
#
# Most importantly: sub-Makefiles should only ever modify files in
# their own directory. If in some directory we have a dependency on
# a file in another dir (which doesn't happen often, but it's often
# unavoidable when linking the built-in.o targets which finally
# turn into vmlinux), we will call a sub make in that other dir, and
# after that we are sure that everything which is in that other dir
# is now up to date.
#
# The only cases where we need to modify files which have global
# effects are thus separated out and done before the recursive
# descending is started. They are now explicitly listed as the
# prepare rule.
# To put more focus on warnings, be less verbose as default
# Use 'make V=1' to see the full commands
ifdef V
ifeq ("$(origin V)", "command line")
KBUILD_VERBOSE = $(V)
endif
endif
ifndef KBUILD_VERBOSE
KBUILD_VERBOSE = 0
endif
# Call sparse as part of compilation of C files
# Use 'make C=1' to enable sparse checking
ifdef C
ifeq ("$(origin C)", "command line")
KBUILD_CHECKSRC = $(C)
endif
endif
ifndef KBUILD_CHECKSRC
KBUILD_CHECKSRC = 0
endif
# Use make M=dir to specify directory of external module to build
# Old syntax make ... SUBDIRS=$PWD is still supported
# Setting the environment variable KBUILD_EXTMOD take precedence
ifdef SUBDIRS
KBUILD_EXTMOD ?= $(SUBDIRS)
endif
ifdef M
ifeq ("$(origin M)", "command line")
KBUILD_EXTMOD := $(M)
endif
endif
# kbuild supports saving output files in a separate directory.
# To locate output files in a separate directory two syntaxes are supported.
# In both cases the working directory must be the root of the kernel src.
# 1) O=
# Use "make O=dir/to/store/output/files/"
#
# 2) Set KBUILD_OUTPUT
# Set the environment variable KBUILD_OUTPUT to point to the directory
# where the output files shall be placed.
# export KBUILD_OUTPUT=dir/to/store/output/files/
# make
#
# The O= assignment takes precedence over the KBUILD_OUTPUT environment
# variable.
# KBUILD_SRC is set on invocation of make in OBJ directory
# KBUILD_SRC is not intended to be used by the regular user (for now)
ifeq ($(KBUILD_SRC),)
# OK, Make called in directory where kernel src resides
# Do we want to locate output files in a separate directory?
ifdef O
ifeq ("$(origin O)", "command line")
KBUILD_OUTPUT := $(O)
endif
endif
# That's our default target when none is given on the command line
.PHONY: _all
_all:
ifneq ($(KBUILD_OUTPUT),)
# Invoke a second make in the output directory, passing relevant variables
# check that the output directory actually exists
saved-output := $(KBUILD_OUTPUT)
KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
$(if $(KBUILD_OUTPUT),, \
$(error output directory "$(saved-output)" does not exist))
.PHONY: $(MAKECMDGOALS)
$(filter-out _all,$(MAKECMDGOALS)) _all:
$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
KBUILD_SRC=$(CURDIR) \
KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@
# Leave processing to above invocation of make
skip-makefile := 1
endif # ifneq ($(KBUILD_OUTPUT),)
endif # ifeq ($(KBUILD_SRC),)
# We process the rest of the Makefile if this is the final invocation of make
ifeq ($(skip-makefile),)
# If building an external module we do not care about the all: rule
# but instead _all depend on modules
.PHONY: all
ifeq ($(KBUILD_EXTMOD),)
_all: all
else
_all: modules
endif
srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
TOPDIR := $(srctree)
# FIXME - TOPDIR is obsolete, use srctree/objtree
objtree := $(CURDIR)
src := $(srctree)
obj := $(objtree)
VPATH := $(srctree)
export srctree objtree VPATH TOPDIR
nullstring :=
space := $(nullstring) # end of line
# Take the contents of any files called localversion* and the config
# variable CONFIG_LOCALVERSION and append them to KERNELRELEASE. Be
# careful not to include files twice if building in the source
# directory. LOCALVERSION from the command line override all of this
localver := $(objtree)/localversion* $(srctree)/localversion*
localver := $(sort $(wildcard $(localver)))
# skip backup files (containing '~')
localver := $(foreach f, $(localver), $(if $(findstring ~, $(f)),,$(f)))
LOCALVERSION = $(subst $(space),, \
$(shell cat /dev/null $(localver)) \
$(patsubst "%",%,$(CONFIG_LOCALVERSION)))
KERNELRELEASE=$(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)$(LOCALVERSION)
# SUBARCH tells the usermode build what the underlying arch is. That is set
# first, and if a usermode build is happening, the "ARCH=um" on the command
# line overrides the setting of ARCH below. If a native build is happening,
# then ARCH is assigned, getting whatever value it gets normally, and
# SUBARCH is subsequently ignored.
SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/s390x/s390/ -e s/parisc64/parisc/ )
# Cross compiling and selecting different set of gcc/bin-utils
# ---------------------------------------------------------------------------
#
# When performing cross compilation for other architectures ARCH shall be set
# to the target architecture. (See arch/* for the possibilities).
# ARCH can be set during invocation of make:
# make ARCH=ia64
# Another way is to have ARCH set in the environment.
# The default ARCH is the host where make is executed.
# CROSS_COMPILE specify the prefix used for all executables used
# during compilation. Only gcc and related bin-utils executables
# are prefixed with $(CROSS_COMPILE).
# CROSS_COMPILE can be set on the command line
# make CROSS_COMPILE=ia64-linux-
# Alternatively CROSS_COMPILE can be set in the environment.
# Default value for CROSS_COMPILE is not to prefix executables
# Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
ARCH ?= $(SUBARCH)
CROSS_COMPILE ?=
# Architecture as present in compile.h
UTS_MACHINE := $(ARCH)
# SHELL used by kbuild
CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
else if [ -x /bin/bash ]; then echo /bin/bash; \
else echo sh; fi ; fi)
HOSTCC = gcc
HOSTCXX = g++
HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
HOSTCXXFLAGS = -O2
# Decide whether to build built-in, modular, or both.
# Normally, just do built-in.
KBUILD_MODULES :=
KBUILD_BUILTIN := 1
# If we have only "make modules", don't compile built-in objects.
# When we're building modules with modversions, we need to consider
# the built-in objects during the descend as well, in order to
# make sure the checksums are uptodate before we record them.
ifeq ($(MAKECMDGOALS),modules)
KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
endif
# If we have "make <whatever> modules", compile modules
# in addition to whatever we do anyway.
# Just "make" or "make all" shall build modules as well
ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
KBUILD_MODULES := 1
endif
ifeq ($(MAKECMDGOALS),)
KBUILD_MODULES := 1
endif
export KBUILD_MODULES KBUILD_BUILTIN
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
# Beautify output
# ---------------------------------------------------------------------------
#
# Normally, we echo the whole command before executing it. By making
# that echo $($(quiet)$(cmd)), we now have the possibility to set
# $(quiet) to choose other forms of output instead, e.g.
#
# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
#
# If $(quiet) is empty, the whole command will be printed.
# If it is set to "quiet_", only the short version will be printed.
# If it is set to "silent_", nothing wil be printed at all, since
# the variable $(silent_cmd_cc_o_c) doesn't exist.
#
# A simple variant is to prefix commands with $(Q) - that's usefull
# for commands that shall be hidden in non-verbose mode.
#
# $(Q)ln $@ :<
#
# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
# If KBUILD_VERBOSE equals 1 then the above command is displayed.
ifeq ($(KBUILD_VERBOSE),1)
quiet =
Q =
else
quiet=quiet_
Q = @
endif
# If the user is running make -s (silent mode), suppress echoing of
# commands
ifneq ($(findstring s,$(MAKEFLAGS)),)
quiet=silent_
endif
export quiet Q KBUILD_VERBOSE
######
# cc support functions to be used (only) in arch/$(ARCH)/Makefile
# See documentation in Documentation/kbuild/makefiles.txt
# cc-option
# Usage: cflags-y += $(call cc-option, -march=winchip-c6, -march=i586)
cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
> /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;)
# For backward compatibility
check_gcc = $(warning check_gcc is deprecated - use cc-option) \
$(call cc-option, $(1),$(2))
# cc-option-yn
# Usage: flag := $(call cc-option-yn, -march=winchip-c6)
cc-option-yn = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
> /dev/null 2>&1; then echo "y"; else echo "n"; fi;)
# cc-option-align
# Prefix align with either -falign or -malign
cc-option-align = $(subst -functions=0,,\
$(call cc-option,-falign-functions=0,-malign-functions=0))
# cc-version
# Usage gcc-ver := $(call cc-version $(CC))
cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh \
$(if $(1), $(1), $(CC)))
# Look for make include files relative to root of kernel src
MAKEFLAGS += --include-dir=$(srctree)
# We need some generic definitions
include $(srctree)/scripts/Kbuild.include
# For maximum performance (+ possibly random breakage, uncomment
# the following)
#MAKEFLAGS += -rR
# Make variables (CC, etc...)
AS = $(CROSS_COMPILE)as
LD = $(CROSS_COMPILE)ld
CC = $(CROSS_COMPILE)gcc
CPP = $(CC) -E
AR = $(CROSS_COMPILE)ar
NM = $(CROSS_COMPILE)nm
STRIP = $(CROSS_COMPILE)strip
OBJCOPY = $(CROSS_COMPILE)objcopy
OBJDUMP = $(CROSS_COMPILE)objdump
AWK = awk
GENKSYMS = scripts/genksyms/genksyms
DEPMOD = /sbin/depmod
KALLSYMS = scripts/kallsyms
PERL = perl
CHECK = sparse
CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ $(CF)
MODFLAGS = -DMODULE
CFLAGS_MODULE = $(MODFLAGS)
AFLAGS_MODULE = $(MODFLAGS)
LDFLAGS_MODULE = -r
CFLAGS_KERNEL =
AFLAGS_KERNEL =
# Use LINUXINCLUDE when you must reference the include/ directory.
# Needed to be compatible with the O= option
LINUXINCLUDE := -Iinclude \
$(if $(KBUILD_SRC),-Iinclude2 -I$(srctree)/include)
CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE)
CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common \
-ffreestanding
AFLAGS := -D__ASSEMBLY__
export VERSION PATCHLEVEL SUBLEVEL EXTRAVERSION LOCALVERSION KERNELRELEASE \
ARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC \
CPP AR NM STRIP OBJCOPY OBJDUMP MAKE AWK GENKSYMS PERL UTS_MACHINE \
HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS
export CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS
export CFLAGS CFLAGS_KERNEL CFLAGS_MODULE
export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
# When compiling out-of-tree modules, put MODVERDIR in the module
# tree rather than in the kernel tree. The kernel tree might
# even be read-only.
export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
# Files to ignore in find ... statements
RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg \) -prune -o
RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg
# ===========================================================================
# Rules shared between *config targets and build targets
# Basic helpers built in scripts/
.PHONY: scripts_basic
scripts_basic:
$(Q)$(MAKE) $(build)=scripts/basic
# To avoid any implicit rule to kick in, define an empty command.
scripts/basic/%: scripts_basic ;
.PHONY: outputmakefile
# outputmakefile generate a Makefile to be placed in output directory, if
# using a seperate output directory. This allows convinient use
# of make in output directory
outputmakefile:
$(Q)if test ! $(srctree) -ef $(objtree); then \
$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
$(srctree) $(objtree) $(VERSION) $(PATCHLEVEL) \
> $(objtree)/Makefile; \
echo ' GEN $(objtree)/Makefile'; \
fi
# To make sure we do not include .config for any of the *config targets
# catch them early, and hand them over to scripts/kconfig/Makefile
# It is allowed to specify more targets when calling make, including
# mixing *config targets and build targets.
# For example 'make oldconfig all'.
# Detect when mixed targets is specified, and make a second invocation
# of make so .config is not included in this case either (for *config).
no-dot-config-targets := clean mrproper distclean \
cscope TAGS tags help %docs check%
config-targets := 0
mixed-targets := 0
dot-config := 1
ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
dot-config := 0
endif
endif
ifeq ($(KBUILD_EXTMOD),)
ifneq ($(filter config %config,$(MAKECMDGOALS)),)
config-targets := 1
ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
mixed-targets := 1
endif
endif
endif
ifeq ($(mixed-targets),1)
# ===========================================================================
# We're called with mixed targets (*config and build targets).
# Handle them one by one.
%:: FORCE
$(Q)$(MAKE) -C $(srctree) KBUILD_SRC= $@
else
ifeq ($(config-targets),1)
# ===========================================================================
# *config targets only - make sure prerequisites are updated, and descend
# in scripts/kconfig to make the *config target
# Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
# KBUILD_DEFCONFIG may point out an alternative default configuration
# used for 'make defconfig'
include $(srctree)/arch/$(ARCH)/Makefile
export KBUILD_DEFCONFIG
config %config: scripts_basic outputmakefile FORCE
$(Q)mkdir -p include/linux
$(Q)$(MAKE) $(build)=scripts/kconfig $@
else
# ===========================================================================
# Build targets only - this includes vmlinux, arch specific targets, clean
# targets and others. In general all targets except *config targets.
ifeq ($(KBUILD_EXTMOD),)
# Additional helpers built in scripts/
# Carefully list dependencies so we do not try to build scripts twice
# in parrallel
.PHONY: scripts
scripts: scripts_basic include/config/MARKER
$(Q)$(MAKE) $(build)=$(@)
scripts_basic: include/linux/autoconf.h
# Objects we will link into vmlinux / subdirs we need to visit
init-y := init/
drivers-y := drivers/ sound/
net-y := net/
libs-y := lib/
core-y := usr/
endif # KBUILD_EXTMOD
ifeq ($(dot-config),1)
# In this section, we need .config
# Read in dependencies to all Kconfig* files, make sure to run
# oldconfig if changes are detected.
-include .config.cmd
include .config
# If .config needs to be updated, it will be done via the dependency
# that autoconf has on .config.
# To avoid any implicit rule to kick in, define an empty command
.config: ;
# If .config is newer than include/linux/autoconf.h, someone tinkered
# with it and forgot to run make oldconfig
include/linux/autoconf.h: .config
$(Q)mkdir -p include/linux
$(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig
else
# Dummy target needed, because used as prerequisite
include/linux/autoconf.h: ;
endif
# The all: target is the default when no target is given on the
# command line.
# This allow a user to issue only 'make' to build a kernel including modules
# Defaults vmlinux but it is usually overriden in the arch makefile
all: vmlinux
ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE
CFLAGS += -Os
else
CFLAGS += -O2
endif
#Add align options if CONFIG_CC_* is not equal to 0
add-align = $(if $(filter-out 0,$($(1))),$(cc-option-align)$(2)=$($(1)))
CFLAGS += $(call add-align,CONFIG_CC_ALIGN_FUNCTIONS,-functions)
CFLAGS += $(call add-align,CONFIG_CC_ALIGN_LABELS,-labels)
CFLAGS += $(call add-align,CONFIG_CC_ALIGN_LOOPS,-loops)
CFLAGS += $(call add-align,CONFIG_CC_ALIGN_JUMPS,-jumps)
ifdef CONFIG_FRAME_POINTER
CFLAGS += -fno-omit-frame-pointer $(call cc-option,-fno-optimize-sibling-calls,)
else
CFLAGS += -fomit-frame-pointer
endif
ifdef CONFIG_DEBUG_INFO
CFLAGS += -g
endif
include $(srctree)/arch/$(ARCH)/Makefile
# arch Makefile may override CC so keep this after arch Makefile is included
NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
CHECKFLAGS += $(NOSTDINC_FLAGS)
# warn about C99 declaration after statement
CFLAGS += $(call cc-option,-Wdeclaration-after-statement,)
# disable pointer signedness warnings in gcc 4.0
CFLAGS += $(call cc-option,-Wno-pointer-sign,)
# Default kernel image to build when no specific target is given.
# KBUILD_IMAGE may be overruled on the commandline or
# set in the environment
# Also any assignments in arch/$(ARCH)/Makefile take precedence over
# this default value
export KBUILD_IMAGE ?= vmlinux
#
# INSTALL_PATH specifies where to place the updated kernel and system map
# images. Default is /boot, but you can set it to other values
export INSTALL_PATH ?= /boot
# If CONFIG_LOCALVERSION_AUTO is set, we automatically perform some tests
# and try to determine if the current source tree is a release tree, of any sort,
# or if is a pure development tree.
#
# A 'release tree' is any tree with a git TAG associated
# with it. The primary goal of this is to make it safe for a native
# git/CVS/SVN user to build a release tree (i.e, 2.6.9) and also to
# continue developing against the current Linus tree, without having the Linus
# tree overwrite the 2.6.9 tree when installed.
#
# Currently, only git is supported.
# Other SCMs can edit scripts/setlocalversion and add the appropriate
# checks as needed.
ifdef CONFIG_LOCALVERSION_AUTO
localversion-auto := $(shell $(PERL) $(srctree)/scripts/setlocalversion $(srctree))
LOCALVERSION := $(LOCALVERSION)$(localversion-auto)
endif
#
# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
# relocations required by build roots. This is not defined in the
# makefile but the arguement can be passed to make if needed.
#
MODLIB := $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
export MODLIB
ifeq ($(KBUILD_EXTMOD),)
core-y += kernel/ mm/ fs/ ipc/ security/ crypto/
vmlinux-dirs := $(patsubst %/,%,$(filter %/, $(init-y) $(init-m) \
$(core-y) $(core-m) $(drivers-y) $(drivers-m) \
$(net-y) $(net-m) $(libs-y) $(libs-m)))
vmlinux-alldirs := $(sort $(vmlinux-dirs) $(patsubst %/,%,$(filter %/, \
$(init-n) $(init-) \
$(core-n) $(core-) $(drivers-n) $(drivers-) \
$(net-n) $(net-) $(libs-n) $(libs-))))
init-y := $(patsubst %/, %/built-in.o, $(init-y))
core-y := $(patsubst %/, %/built-in.o, $(core-y))
drivers-y := $(patsubst %/, %/built-in.o, $(drivers-y))
net-y := $(patsubst %/, %/built-in.o, $(net-y))
libs-y1 := $(patsubst %/, %/lib.a, $(libs-y))
libs-y2 := $(patsubst %/, %/built-in.o, $(libs-y))
libs-y := $(libs-y1) $(libs-y2)
# Build vmlinux
# ---------------------------------------------------------------------------
# vmlinux is build from the objects selected by $(vmlinux-init) and
# $(vmlinux-main). Most are built-in.o files from top-level directories
# in the kernel tree, others are specified in arch/$(ARCH)Makefile.
# Ordering when linking is important, and $(vmlinux-init) must be first.
#
# vmlinux
# ^
# |
# +-< $(vmlinux-init)
# | +--< init/version.o + more
# |
# +--< $(vmlinux-main)
# | +--< driver/built-in.o mm/built-in.o + more
# |
# +-< kallsyms.o (see description in CONFIG_KALLSYMS section)
#
# vmlinux version (uname -v) cannot be updated during normal
# descending-into-subdirs phase since we do not yet know if we need to
# update vmlinux.
# Therefore this step is delayed until just before final link of vmlinux -
# except in the kallsyms case where it is done just before adding the
# symbols to the kernel.
#
# System.map is generated to document addresses of all kernel symbols
vmlinux-init := $(head-y) $(init-y)
vmlinux-main := $(core-y) $(libs-y) $(drivers-y) $(net-y)
vmlinux-all := $(vmlinux-init) $(vmlinux-main)
vmlinux-lds := arch/$(ARCH)/kernel/vmlinux.lds
# Rule to link vmlinux - also used during CONFIG_KALLSYMS
# May be overridden by arch/$(ARCH)/Makefile
quiet_cmd_vmlinux__ ?= LD $@
cmd_vmlinux__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_vmlinux) -o $@ \
-T $(vmlinux-lds) $(vmlinux-init) \
--start-group $(vmlinux-main) --end-group \
$(filter-out $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) FORCE ,$^)
# Generate new vmlinux version
quiet_cmd_vmlinux_version = GEN .version
cmd_vmlinux_version = set -e; \
if [ ! -r .version ]; then \
rm -f .version; \
echo 1 >.version; \
else \
mv .version .old_version; \
expr 0$$(cat .old_version) + 1 >.version; \
fi; \
$(MAKE) $(build)=init
# Generate System.map
quiet_cmd_sysmap = SYSMAP
cmd_sysmap = $(CONFIG_SHELL) $(srctree)/scripts/mksysmap
# Link of vmlinux
# If CONFIG_KALLSYMS is set .version is already updated
# Generate System.map and verify that the content is consistent
define rule_vmlinux__
$(if $(CONFIG_KALLSYMS),,+$(call cmd,vmlinux_version))
$(call cmd,vmlinux__)
$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
$(Q)$(if $($(quiet)cmd_sysmap), \
echo ' $($(quiet)cmd_sysmap) System.map' &&) \
$(cmd_sysmap) $@ System.map; \
if [ $$? -ne 0 ]; then \
rm -f $@; \
/bin/false; \
fi;
$(verify_kallsyms)
endef
ifdef CONFIG_KALLSYMS
# Generate section listing all symbols and add it into vmlinux $(kallsyms.o)
# It's a three stage process:
# o .tmp_vmlinux1 has all symbols and sections, but __kallsyms is
# empty
# Running kallsyms on that gives us .tmp_kallsyms1.o with
# the right size - vmlinux version (uname -v) is updated during this step
# o .tmp_vmlinux2 now has a __kallsyms section of the right size,
# but due to the added section, some addresses have shifted.
# From here, we generate a correct .tmp_kallsyms2.o
# o The correct .tmp_kallsyms2.o is linked into the final vmlinux.
# o Verify that the System.map from vmlinux matches the map from
# .tmp_vmlinux2, just in case we did not generate kallsyms correctly.
# o If CONFIG_KALLSYMS_EXTRA_PASS is set, do an extra pass using
# .tmp_vmlinux3 and .tmp_kallsyms3.o. This is only meant as a
# temporary bypass to allow the kernel to be built while the
# maintainers work out what went wrong with kallsyms.
ifdef CONFIG_KALLSYMS_EXTRA_PASS
last_kallsyms := 3
else
last_kallsyms := 2
endif
kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
define verify_kallsyms
$(Q)$(if $($(quiet)cmd_sysmap), \
echo ' $($(quiet)cmd_sysmap) .tmp_System.map' &&) \
$(cmd_sysmap) .tmp_vmlinux$(last_kallsyms) .tmp_System.map
$(Q)cmp -s System.map .tmp_System.map || \
(echo Inconsistent kallsyms data; \
echo Try setting CONFIG_KALLSYMS_EXTRA_PASS; \
rm .tmp_kallsyms* ; /bin/false )
endef
# Update vmlinux version before link
# Use + in front of this rule to silent warning about make -j1
# First command is ':' to allow us to use + in front of this rule
cmd_ksym_ld = $(cmd_vmlinux__)
define rule_ksym_ld
:
+$(call cmd,vmlinux_version)
$(call cmd,vmlinux__)
$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
endef
# Generate .S file with all kernel symbols
quiet_cmd_kallsyms = KSYM $@
cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
$(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
$(call if_changed_dep,as_o_S)
.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
$(call cmd,kallsyms)
# .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
$(call if_changed_rule,ksym_ld)
.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
$(call if_changed,vmlinux__)
.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
$(call if_changed,vmlinux__)
# Needs to visit scripts/ before $(KALLSYMS) can be used.
$(KALLSYMS): scripts ;
# Generate some data for debugging strange kallsyms problems
debug_kallsyms: .tmp_map$(last_kallsyms)
.tmp_map%: .tmp_vmlinux% FORCE
($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
.tmp_map3: .tmp_map2
.tmp_map2: .tmp_map1
endif # ifdef CONFIG_KALLSYMS
# vmlinux image - including updated kernel symbols
vmlinux: $(vmlinux-lds) $(vmlinux-init) $(vmlinux-main) $(kallsyms.o) FORCE
$(call if_changed_rule,vmlinux__)
$(Q)rm -f .old_version
# The actual objects are generated when descending,
# make sure no implicit rule kicks in
$(sort $(vmlinux-init) $(vmlinux-main)) $(vmlinux-lds): $(vmlinux-dirs) ;
# Handle descending into subdirectories listed in $(vmlinux-dirs)
# Preset locale variables to speed up the build process. Limit locale
# tweaks to this spot to avoid wrong language settings when running
# make menuconfig etc.
# Error messages still appears in the original language
.PHONY: $(vmlinux-dirs)
$(vmlinux-dirs): prepare scripts
$(Q)$(MAKE) $(build)=$@
# Things we need to do before we recursively start building the kernel
# or the modules are listed in "prepare".
# A multi level approach is used. prepareN is processed before prepareN-1.
# archprepare is used in arch Makefiles and when processed asm symlink,
# version.h and scripts_basic is processed / created.
# Listed in dependency order
.PHONY: prepare archprepare prepare0 prepare1 prepare2 prepare3
# prepare-all is deprecated, use prepare as valid replacement
.PHONY: prepare-all
# prepare3 is used to check if we are building in a separate output directory,
# and if so do:
# 1) Check that make has not been executed in the kernel src $(srctree)
# 2) Create the include2 directory, used for the second asm symlink
prepare3:
ifneq ($(KBUILD_SRC),)
@echo ' Using $(srctree) as source for kernel'
$(Q)if [ -f $(srctree)/.config ]; then \
echo " $(srctree) is not clean, please run 'make mrproper'";\
echo " in the '$(srctree)' directory.";\
/bin/false; \
fi;
$(Q)if [ ! -d include2 ]; then mkdir -p include2; fi;
$(Q)ln -fsn $(srctree)/include/asm-$(ARCH) include2/asm
endif
# prepare2 creates a makefile if using a separate output directory
prepare2: prepare3 outputmakefile
prepare1: prepare2 include/linux/version.h include/asm \
include/config/MARKER
ifneq ($(KBUILD_MODULES),)
$(Q)rm -rf $(MODVERDIR)
$(Q)mkdir -p $(MODVERDIR)
endif
archprepare: prepare1 scripts_basic
prepare0: archprepare FORCE
$(Q)$(MAKE) $(build)=.
# All the preparing..
prepare prepare-all: prepare0
# Leave this as default for preprocessing vmlinux.lds.S, which is now
# done in arch/$(ARCH)/kernel/Makefile
export CPPFLAGS_vmlinux.lds += -P -C -U$(ARCH)
# Single targets
# ---------------------------------------------------------------------------
%.s: %.c scripts FORCE
$(Q)$(MAKE) $(build)=$(@D) $@
%.i: %.c scripts FORCE
$(Q)$(MAKE) $(build)=$(@D) $@
%.o: %.c scripts FORCE
$(Q)$(MAKE) $(build)=$(@D) $@
%.ko: scripts FORCE
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D) $(@:.ko=.o)
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
%/: scripts prepare FORCE
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) $(build)=$(@D)
%.lst: %.c scripts FORCE
$(Q)$(MAKE) $(build)=$(@D) $@
%.s: %.S scripts FORCE
$(Q)$(MAKE) $(build)=$(@D) $@
%.o: %.S scripts FORCE
$(Q)$(MAKE) $(build)=$(@D) $@
# FIXME: The asm symlink changes when $(ARCH) changes. That's
# hard to detect, but I suppose "make mrproper" is a good idea
# before switching between archs anyway.
include/asm:
@echo ' SYMLINK $@ -> include/asm-$(ARCH)'
$(Q)if [ ! -d include ]; then mkdir -p include; fi;
@ln -fsn asm-$(ARCH) $@
# Split autoconf.h into include/linux/config/*
include/config/MARKER: scripts/basic/split-include include/linux/autoconf.h
@echo ' SPLIT include/linux/autoconf.h -> include/config/*'
@scripts/basic/split-include include/linux/autoconf.h include/config
@touch $@
# Generate some files
# ---------------------------------------------------------------------------
# KERNELRELEASE can change from a few different places, meaning version.h
# needs to be updated, so this check is forced on all builds
uts_len := 64
define filechk_version.h
if [ `echo -n "$(KERNELRELEASE)" | wc -c ` -gt $(uts_len) ]; then \
echo '"$(KERNELRELEASE)" exceeds $(uts_len) characters' >&2; \
exit 1; \
fi; \
(echo \#define UTS_RELEASE \"$(KERNELRELEASE)\"; \
echo \#define LINUX_VERSION_CODE `expr $(VERSION) \\* 65536 + $(PATCHLEVEL) \\* 256 + $(SUBLEVEL)`; \
echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))'; \
)
endef
include/linux/version.h: $(srctree)/Makefile FORCE
$(call filechk,version.h)
# ---------------------------------------------------------------------------
.PHONY: depend dep
depend dep:
@echo '*** Warning: make $@ is unnecessary now.'
# ---------------------------------------------------------------------------
# Modules
ifdef CONFIG_MODULES
# By default, build modules as well
all: modules
# Build modules
.PHONY: modules
modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
@echo ' Building modules, stage 2.';
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
# Target to prepare building external modules
.PHONY: modules_prepare
modules_prepare: prepare scripts
# Target to install modules
.PHONY: modules_install
modules_install: _modinst_ _modinst_post
.PHONY: _modinst_
_modinst_:
@if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
echo "Warning: you may need to install module-init-tools"; \
echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
sleep 1; \
fi
@rm -rf $(MODLIB)/kernel
@rm -f $(MODLIB)/source
@mkdir -p $(MODLIB)/kernel
@ln -s $(srctree) $(MODLIB)/source
@if [ ! $(objtree) -ef $(MODLIB)/build ]; then \
rm -f $(MODLIB)/build ; \
ln -s $(objtree) $(MODLIB)/build ; \
fi
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
# If System.map exists, run depmod. This deliberately does not have a
# dependency on System.map since that would run the dependency tree on
# vmlinux. This depmod is only for convenience to give the initial
# boot a modules.dep even before / is mounted read-write. However the
# boot script depmod is the master version.
ifeq "$(strip $(INSTALL_MOD_PATH))" ""
depmod_opts :=
else
depmod_opts := -b $(INSTALL_MOD_PATH) -r
endif
.PHONY: _modinst_post
_modinst_post: _modinst_
if [ -r System.map -a -x $(DEPMOD) ]; then $(DEPMOD) -ae -F System.map $(depmod_opts) $(KERNELRELEASE); fi
else # CONFIG_MODULES
# Modules not configured
# ---------------------------------------------------------------------------
modules modules_install: FORCE
@echo
@echo "The present kernel configuration has modules disabled."
@echo "Type 'make config' and enable loadable module support."
@echo "Then build a kernel with module support enabled."
@echo
@exit 1
endif # CONFIG_MODULES
###
# Cleaning is done on three levels.
# make clean Delete most generated files
# Leave enough to build external modules
# make mrproper Delete the current configuration, and all generated files
# make distclean Remove editor backup files, patch leftover files and the like
# Directories & files removed with 'make clean'
CLEAN_DIRS += $(MODVERDIR)
CLEAN_FILES += vmlinux System.map \
.tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
# Directories & files removed with 'make mrproper'
MRPROPER_DIRS += include/config include2
MRPROPER_FILES += .config .config.old include/asm .version \
include/linux/autoconf.h include/linux/version.h \
Module.symvers tags TAGS cscope*
# clean - Delete most, but leave enough to build external modules
#
clean: rm-dirs := $(CLEAN_DIRS)
clean: rm-files := $(CLEAN_FILES)
clean-dirs := $(addprefix _clean_,$(srctree) $(vmlinux-alldirs))
.PHONY: $(clean-dirs) clean archclean
$(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
clean: archclean $(clean-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)
@find . $(RCS_FIND_IGNORE) \
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
-type f -print | xargs rm -f
# mrproper - Delete all generated files, including .config
#
mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
mrproper-dirs := $(addprefix _mrproper_,Documentation/DocBook scripts)
.PHONY: $(mrproper-dirs) mrproper archmrproper
$(mrproper-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
mrproper: clean archmrproper $(mrproper-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)
# distclean
#
.PHONY: distclean
distclean: mrproper
@find $(srctree) $(RCS_FIND_IGNORE) \
\( -name '*.orig' -o -name '*.rej' -o -name '*~' \
-o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
-o -name '.*.rej' -o -size 0 \
-o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
-type f -print | xargs rm -f
# Packaging of the kernel to various formats
# ---------------------------------------------------------------------------
# rpm target kept for backward compatibility
package-dir := $(srctree)/scripts/package
.PHONY: %-pkg rpm
%pkg: FORCE
$(Q)$(MAKE) -f $(package-dir)/Makefile $@
rpm: FORCE
$(Q)$(MAKE) -f $(package-dir)/Makefile $@
# Brief documentation of the typical targets used
# ---------------------------------------------------------------------------
boards := $(wildcard $(srctree)/arch/$(ARCH)/configs/*_defconfig)
boards := $(notdir $(boards))
help:
@echo 'Cleaning targets:'
@echo ' clean - remove most generated files but keep the config'
@echo ' mrproper - remove all generated files + config + various backup files'
@echo ''
@echo 'Configuration targets:'
@$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
@echo ''
@echo 'Other generic targets:'
@echo ' all - Build all targets marked with [*]'
@echo '* vmlinux - Build the bare kernel'
@echo '* modules - Build all modules'
@echo ' modules_install - Install all modules'
@echo ' dir/ - Build all files in dir and below'
@echo ' dir/file.[ois] - Build specified target only'
@echo ' dir/file.ko - Build module including final link'
@echo ' rpm - Build a kernel as an RPM package'
@echo ' tags/TAGS - Generate tags file for editors'
@echo ' cscope - Generate cscope index'
@echo ' kernelrelease - Output the release version string'
@echo ''
@echo 'Static analysers'
@echo ' buildcheck - List dangling references to vmlinux discarded sections'
@echo ' and init sections from non-init sections'
@echo ' checkstack - Generate a list of stack hogs'
@echo ' namespacecheck - Name space analysis on compiled kernel'
@echo ''
@echo 'Kernel packaging:'
@$(MAKE) -f $(package-dir)/Makefile help
@echo ''
@echo 'Documentation targets:'
@$(MAKE) -f $(srctree)/Documentation/DocBook/Makefile dochelp
@echo ''
@echo 'Architecture specific targets ($(ARCH)):'
@$(if $(archhelp),$(archhelp),\
echo ' No architecture specific help defined for $(ARCH)')
@echo ''
@$(if $(boards), \
$(foreach b, $(boards), \
printf " %-24s - Build for %s\\n" $(b) $(subst _defconfig,,$(b));) \
echo '')
@echo ' make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
@echo ' make O=dir [targets] Locate all output files in "dir", including .config'
@echo ' make C=1 [targets] Check all c source with $$CHECK (sparse)'
@echo ' make C=2 [targets] Force check of all c source with $$CHECK (sparse)'
@echo ''
@echo 'Execute "make" or "make all" to build all targets marked with [*] '
@echo 'For further info see the ./README file'
# Documentation targets
# ---------------------------------------------------------------------------
%docs: scripts_basic FORCE
$(Q)$(MAKE) $(build)=Documentation/DocBook $@
else # KBUILD_EXTMOD
###
# External module support.
# When building external modules the kernel used as basis is considered
# read-only, and no consistency checks are made and the make
# system is not used on the basis kernel. If updates are required
# in the basis kernel ordinary make commands (without M=...) must
# be used.
#
# The following are the only valid targets when building external
# modules.
# make M=dir clean Delete all automatically generated files
# make M=dir modules Make all modules in specified dir
# make M=dir Same as 'make M=dir modules'
# make M=dir modules_install
# Install the modules build in the module directory
# Assumes install directory is already created
# We are always building modules
KBUILD_MODULES := 1
.PHONY: crmodverdir
crmodverdir:
$(Q)mkdir -p $(MODVERDIR)
.PHONY: $(objtree)/Module.symvers
$(objtree)/Module.symvers:
@test -e $(objtree)/Module.symvers || ( \
echo; \
echo " WARNING: Symbol version dump $(objtree)/Module.symvers"; \
echo " is missing; modules will have no dependencies and modversions."; \
echo )
module-dirs := $(addprefix _module_,$(KBUILD_EXTMOD))
.PHONY: $(module-dirs) modules
$(module-dirs): crmodverdir $(objtree)/Module.symvers
$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
modules: $(module-dirs)
@echo ' Building modules, stage 2.';
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modpost
.PHONY: modules_install
modules_install:
$(Q)$(MAKE) -rR -f $(srctree)/scripts/Makefile.modinst
clean-dirs := $(addprefix _clean_,$(KBUILD_EXTMOD))
.PHONY: $(clean-dirs) clean
$(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
clean: rm-dirs := $(MODVERDIR)
clean: $(clean-dirs)
$(call cmd,rmdirs)
@find $(KBUILD_EXTMOD) $(RCS_FIND_IGNORE) \
\( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
-o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \) \
-type f -print | xargs rm -f
help:
@echo ' Building external modules.'
@echo ' Syntax: make -C path/to/kernel/src M=$$PWD target'
@echo ''
@echo ' modules - default target, build the module(s)'
@echo ' modules_install - install the module'
@echo ' clean - remove generated files in module directory only'
@echo ''
endif # KBUILD_EXTMOD
# Generate tags for editors
# ---------------------------------------------------------------------------
#We want __srctree to totally vanish out when KBUILD_OUTPUT is not set
#(which is the most common case IMHO) to avoid unneeded clutter in the big tags file.
#Adding $(srctree) adds about 20M on i386 to the size of the output file!
ifeq ($(src),$(obj))
__srctree =
else
__srctree = $(srctree)/
endif
ALLSOURCE_ARCHS := $(ARCH)
define all-sources
( find $(__srctree) $(RCS_FIND_IGNORE) \
\( -name include -o -name arch \) -prune -o \
-name '*.[chS]' -print; \
for ARCH in $(ALLSOURCE_ARCHS) ; do \
find $(__srctree)arch/$${ARCH} $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print; \
done ; \
find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print; \
find $(__srctree)include $(RCS_FIND_IGNORE) \
\( -name config -o -name 'asm-*' \) -prune \
-o -name '*.[chS]' -print; \
for ARCH in $(ALLSOURCE_ARCHS) ; do \
find $(__srctree)include/asm-$${ARCH} $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print; \
done ; \
find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print )
endef
quiet_cmd_cscope-file = FILELST cscope.files
cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files
quiet_cmd_cscope = MAKE cscope.out
cmd_cscope = cscope -b
cscope: FORCE
$(call cmd,cscope-file)
$(call cmd,cscope)
quiet_cmd_TAGS = MAKE $@
define cmd_TAGS
rm -f $@; \
ETAGSF=`etags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_GPL --extra=+f"`; \
$(all-sources) | xargs etags $$ETAGSF -a
endef
TAGS: FORCE
$(call cmd,TAGS)
quiet_cmd_tags = MAKE $@
define cmd_tags
rm -f $@; \
CTAGSF=`ctags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_GPL --extra=+f"`; \
$(all-sources) | xargs ctags $$CTAGSF -a
endef
tags: FORCE
$(call cmd,tags)
# Scripts to check various things for consistency
# ---------------------------------------------------------------------------
configcheck:
find * $(RCS_FIND_IGNORE) \
-name '*.[hcS]' -type f -print | sort \
| xargs $(PERL) -w scripts/checkconfig.pl
includecheck:
find * $(RCS_FIND_IGNORE) \
-name '*.[hcS]' -type f -print | sort \
| xargs $(PERL) -w scripts/checkincludes.pl
versioncheck:
find * $(RCS_FIND_IGNORE) \
-name '*.[hcS]' -type f -print | sort \
| xargs $(PERL) -w scripts/checkversion.pl
buildcheck:
$(PERL) $(srctree)/scripts/reference_discarded.pl
$(PERL) $(srctree)/scripts/reference_init.pl
namespacecheck:
$(PERL) $(srctree)/scripts/namespace.pl
endif #ifeq ($(config-targets),1)
endif #ifeq ($(mixed-targets),1)
.PHONY: checkstack
checkstack:
$(OBJDUMP) -d vmlinux $$(find . -name '*.ko') | \
$(PERL) $(src)/scripts/checkstack.pl $(ARCH)
kernelrelease:
@echo $(KERNELRELEASE)
# FIXME Should go into a make.lib or something
# ===========================================================================
quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs)))
cmd_rmdirs = rm -rf $(rm-dirs)
quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN $(wildcard $(rm-files)))
cmd_rmfiles = rm -f $(rm-files)
a_flags = -Wp,-MD,$(depfile) $(AFLAGS) $(AFLAGS_KERNEL) \
$(NOSTDINC_FLAGS) $(CPPFLAGS) \
$(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(*F).o)
quiet_cmd_as_o_S = AS $@
cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
# read all saved command lines
targets := $(wildcard $(sort $(targets)))
cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
ifneq ($(cmd_files),)
$(cmd_files): ; # Do not try to update included dependency files
include $(cmd_files)
endif
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
# Usage:
# $(Q)$(MAKE) $(clean)=dir
clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
endif # skip-makefile
FORCE:
