path: root/Documentation/devicetree/bindings/usb/keystone-usb.txt

TI Keystone Soc USB Controller

DWC3 GLUE

Required properties:
 - compatible: should be "ti,keystone-dwc3".
 - #address-cells, #size-cells : should be '1' if the device has sub-nodes
   with 'reg' property.
 - reg : Address and length of the register set for the USB subsystem on
   the SOC.
 - interrupts : The irq number of this device that is used to interrupt the
   MPU.
 - ranges: allows valid 1:1 translation between child's address space and
   parent's address space.
 - clocks: Clock IDs array as required by the controller.
 - clock-names: names of clocks correseponding to IDs in the clock property.

Sub-nodes:
The dwc3 core should be added as subnode to Keystone DWC3 glue.
- dwc3 :
   The binding details of dwc3 can be found in:
   Documentation/devicetree/bindings/usb/dwc3.txt

Example:
	usb: usb@2680000 {
		compatible = "ti,keystone-dwc3";
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0x2680000 0x10000>;
		clocks = <&clkusb>;
		clock-names = "usb";
		interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
		ranges;
		status = "disabled";

		dwc3@2690000 {
			compatible = "synopsys,dwc3";
			reg = <0x2690000 0x70000>;
			interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
			usb-phy = <&usb_phy>, <&usb_phy>;
		};
	};