<feed xmlns='http://www.w3.org/2005/Atom'>
<title>litmus-rt.git/mm/Makefile, branch v2.6.29-rc5</title>
<subtitle>The LITMUS^RT kernel.</subtitle>
<link rel='alternate' type='text/html' href='http://rtsrv.cs.unc.edu/cgit/cgit.cgi/litmus-rt.git/'/>
<entry>
<title>shmem: unify regular and tiny shmem</title>
<updated>2009-01-06T23:59:08+00:00</updated>
<author>
<name>Matt Mackall</name>
<email>mpm@selenic.com</email>
</author>
<published>2009-01-06T22:40:20+00:00</published>
<link rel='alternate' type='text/html' href='http://rtsrv.cs.unc.edu/cgit/cgit.cgi/litmus-rt.git/commit/?id=853ac43ab194f5051b27a55060215d696dc9480d'/>
<id>853ac43ab194f5051b27a55060215d696dc9480d</id>
<content type='text'>
tiny-shmem shares most of its 130 lines of code with shmem and tends to
break when particular bits of shmem get modified.  Unifying saves code and
makes keeping these two in sync much easier.

before:
  14367	    392	     24	  14783	   39bf	mm/shmem.o
    396      72       8     476	    1dc	mm/tiny-shmem.o

after:
  14367	    392	     24	  14783	   39bf	mm/shmem.o
    412	     72       8     492	    1ec	mm/shmem.o tiny

Signed-off-by: Matt Mackall &lt;mpm@selenic.com&gt;
Acked-by: Hugh Dickins &lt;hugh@veritas.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
tiny-shmem shares most of its 130 lines of code with shmem and tends to
break when particular bits of shmem get modified.  Unifying saves code and
makes keeping these two in sync much easier.

before:
  14367	    392	     24	  14783	   39bf	mm/shmem.o
    396      72       8     476	    1dc	mm/tiny-shmem.o

after:
  14367	    392	     24	  14783	   39bf	mm/shmem.o
    412	     72       8     492	    1ec	mm/shmem.o tiny

Signed-off-by: Matt Mackall &lt;mpm@selenic.com&gt;
Acked-by: Hugh Dickins &lt;hugh@veritas.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>SLUB: failslab support</title>
<updated>2008-12-29T09:27:46+00:00</updated>
<author>
<name>Akinobu Mita</name>
<email>akinobu.mita@gmail.com</email>
</author>
<published>2008-12-23T10:37:01+00:00</published>
<link rel='alternate' type='text/html' href='http://rtsrv.cs.unc.edu/cgit/cgit.cgi/litmus-rt.git/commit/?id=773ff60e841461cb1f9374a713ffcda029b8c317'/>
<id>773ff60e841461cb1f9374a713ffcda029b8c317</id>
<content type='text'>
Currently fault-injection capability for SLAB allocator is only
available to SLAB. This patch makes it available to SLUB, too.

[penberg@cs.helsinki.fi: unify slab and slub implementations]
Cc: Christoph Lameter &lt;cl@linux-foundation.org&gt;
Cc: Matt Mackall &lt;mpm@selenic.com&gt;
Signed-off-by: Akinobu Mita &lt;akinobu.mita@gmail.com&gt;
Signed-off-by: Pekka Enberg &lt;penberg@cs.helsinki.fi&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Currently fault-injection capability for SLAB allocator is only
available to SLAB. This patch makes it available to SLUB, too.

[penberg@cs.helsinki.fi: unify slab and slub implementations]
Cc: Christoph Lameter &lt;cl@linux-foundation.org&gt;
Cc: Matt Mackall &lt;mpm@selenic.com&gt;
Signed-off-by: Akinobu Mita &lt;akinobu.mita@gmail.com&gt;
Signed-off-by: Pekka Enberg &lt;penberg@cs.helsinki.fi&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>memcg: allocate all page_cgroup at boot</title>
<updated>2008-10-20T15:52:39+00:00</updated>
<author>
<name>KAMEZAWA Hiroyuki</name>
<email>kamezawa.hiroyu@jp.fujitsu.com</email>
</author>
<published>2008-10-19T03:28:16+00:00</published>
<link rel='alternate' type='text/html' href='http://rtsrv.cs.unc.edu/cgit/cgit.cgi/litmus-rt.git/commit/?id=52d4b9ac0b985168009c2a57098324e67bae171f'/>
<id>52d4b9ac0b985168009c2a57098324e67bae171f</id>
<content type='text'>
Allocate all page_cgroup at boot and remove page_cgroup poitner from
struct page.  This patch adds an interface as

 struct page_cgroup *lookup_page_cgroup(struct page*)

All FLATMEM/DISCONTIGMEM/SPARSEMEM  and MEMORY_HOTPLUG is supported.

Remove page_cgroup pointer reduces the amount of memory by
 - 4 bytes per PAGE_SIZE.
 - 8 bytes per PAGE_SIZE
if memory controller is disabled. (even if configured.)

On usual 8GB x86-32 server, this saves 8MB of NORMAL_ZONE memory.
On my x86-64 server with 48GB of memory, this saves 96MB of memory.
I think this reduction makes sense.

By pre-allocation, kmalloc/kfree in charge/uncharge are removed.
This means
  - we're not necessary to be afraid of kmalloc faiulre.
    (this can happen because of gfp_mask type.)
  - we can avoid calling kmalloc/kfree.
  - we can avoid allocating tons of small objects which can be fragmented.
  - we can know what amount of memory will be used for this extra-lru handling.

I added printk message as

	"allocated %ld bytes of page_cgroup"
        "please try cgroup_disable=memory option if you don't want"

maybe enough informative for users.

Signed-off-by: KAMEZAWA Hiroyuki &lt;kamezawa.hiroyu@jp.fujitsu.com&gt;
Reviewed-by: Balbir Singh &lt;balbir@linux.vnet.ibm.com&gt;
Cc: Daisuke Nishimura &lt;nishimura@mxp.nes.nec.co.jp&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Allocate all page_cgroup at boot and remove page_cgroup poitner from
struct page.  This patch adds an interface as

 struct page_cgroup *lookup_page_cgroup(struct page*)

All FLATMEM/DISCONTIGMEM/SPARSEMEM  and MEMORY_HOTPLUG is supported.

Remove page_cgroup pointer reduces the amount of memory by
 - 4 bytes per PAGE_SIZE.
 - 8 bytes per PAGE_SIZE
if memory controller is disabled. (even if configured.)

On usual 8GB x86-32 server, this saves 8MB of NORMAL_ZONE memory.
On my x86-64 server with 48GB of memory, this saves 96MB of memory.
I think this reduction makes sense.

By pre-allocation, kmalloc/kfree in charge/uncharge are removed.
This means
  - we're not necessary to be afraid of kmalloc faiulre.
    (this can happen because of gfp_mask type.)
  - we can avoid calling kmalloc/kfree.
  - we can avoid allocating tons of small objects which can be fragmented.
  - we can know what amount of memory will be used for this extra-lru handling.

I added printk message as

	"allocated %ld bytes of page_cgroup"
        "please try cgroup_disable=memory option if you don't want"

maybe enough informative for users.

Signed-off-by: KAMEZAWA Hiroyuki &lt;kamezawa.hiroyu@jp.fujitsu.com&gt;
Reviewed-by: Balbir Singh &lt;balbir@linux.vnet.ibm.com&gt;
Cc: Daisuke Nishimura &lt;nishimura@mxp.nes.nec.co.jp&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mmu-notifiers: core</title>
<updated>2008-07-28T23:30:21+00:00</updated>
<author>
<name>Andrea Arcangeli</name>
<email>andrea@qumranet.com</email>
</author>
<published>2008-07-28T22:46:29+00:00</published>
<link rel='alternate' type='text/html' href='http://rtsrv.cs.unc.edu/cgit/cgit.cgi/litmus-rt.git/commit/?id=cddb8a5c14aa89810b40495d94d3d2a0faee6619'/>
<id>cddb8a5c14aa89810b40495d94d3d2a0faee6619</id>
<content type='text'>
With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages.
 There are secondary MMUs (with secondary sptes and secondary tlbs) too.
sptes in the kvm case are shadow pagetables, but when I say spte in
mmu-notifier context, I mean "secondary pte".  In GRU case there's no
actual secondary pte and there's only a secondary tlb because the GRU
secondary MMU has no knowledge about sptes and every secondary tlb miss
event in the MMU always generates a page fault that has to be resolved by
the CPU (this is not the case of KVM where the a secondary tlb miss will
walk sptes in hardware and it will refill the secondary tlb transparently
to software if the corresponding spte is present).  The same way
zap_page_range has to invalidate the pte before freeing the page, the spte
(and secondary tlb) must also be invalidated before any page is freed and
reused.

Currently we take a page_count pin on every page mapped by sptes, but that
means the pages can't be swapped whenever they're mapped by any spte
because they're part of the guest working set.  Furthermore a spte unmap
event can immediately lead to a page to be freed when the pin is released
(so requiring the same complex and relatively slow tlb_gather smp safe
logic we have in zap_page_range and that can be avoided completely if the
spte unmap event doesn't require an unpin of the page previously mapped in
the secondary MMU).

The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk-&gt;mm and know
when the VM is swapping or freeing or doing anything on the primary MMU so
that the secondary MMU code can drop sptes before the pages are freed,
avoiding all page pinning and allowing 100% reliable swapping of guest
physical address space.  Furthermore it avoids the code that teardown the
mappings of the secondary MMU, to implement a logic like tlb_gather in
zap_page_range that would require many IPI to flush other cpu tlbs, for
each fixed number of spte unmapped.

To make an example: if what happens on the primary MMU is a protection
downgrade (from writeable to wrprotect) the secondary MMU mappings will be
invalidated, and the next secondary-mmu-page-fault will call
get_user_pages and trigger a do_wp_page through get_user_pages if it
called get_user_pages with write=1, and it'll re-establishing an updated
spte or secondary-tlb-mapping on the copied page.  Or it will setup a
readonly spte or readonly tlb mapping if it's a guest-read, if it calls
get_user_pages with write=0.  This is just an example.

This allows to map any page pointed by any pte (and in turn visible in the
primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an
full MMU with both sptes and secondary-tlb like the shadow-pagetable layer
with kvm), or a remote DMA in software like XPMEM (hence needing of
schedule in XPMEM code to send the invalidate to the remote node, while no
need to schedule in kvm/gru as it's an immediate event like invalidating
primary-mmu pte).

At least for KVM without this patch it's impossible to swap guests
reliably.  And having this feature and removing the page pin allows
several other optimizations that simplify life considerably.

Dependencies:

1) mm_take_all_locks() to register the mmu notifier when the whole VM
   isn't doing anything with "mm".  This allows mmu notifier users to keep
   track if the VM is in the middle of the invalidate_range_begin/end
   critical section with an atomic counter incraese in range_begin and
   decreased in range_end.  No secondary MMU page fault is allowed to map
   any spte or secondary tlb reference, while the VM is in the middle of
   range_begin/end as any page returned by get_user_pages in that critical
   section could later immediately be freed without any further
   -&gt;invalidate_page notification (invalidate_range_begin/end works on
   ranges and -&gt;invalidate_page isn't called immediately before freeing
   the page).  To stop all page freeing and pagetable overwrites the
   mmap_sem must be taken in write mode and all other anon_vma/i_mmap
   locks must be taken too.

2) It'd be a waste to add branches in the VM if nobody could possibly
   run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if
   CONFIG_KVM=m/y.  In the current kernel kvm won't yet take advantage of
   mmu notifiers, but this already allows to compile a KVM external module
   against a kernel with mmu notifiers enabled and from the next pull from
   kvm.git we'll start using them.  And GRU/XPMEM will also be able to
   continue the development by enabling KVM=m in their config, until they
   submit all GRU/XPMEM GPLv2 code to the mainline kernel.  Then they can
   also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n).
   This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM
   are all =n.

The mmu_notifier_register call can fail because mm_take_all_locks may be
interrupted by a signal and return -EINTR.  Because mmu_notifier_reigster
is used when a driver startup, a failure can be gracefully handled.  Here
an example of the change applied to kvm to register the mmu notifiers.
Usually when a driver startups other allocations are required anyway and
-ENOMEM failure paths exists already.

 struct  kvm *kvm_arch_create_vm(void)
 {
        struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL);
+       int err;

        if (!kvm)
                return ERR_PTR(-ENOMEM);

        INIT_LIST_HEAD(&amp;kvm-&gt;arch.active_mmu_pages);

+       kvm-&gt;arch.mmu_notifier.ops = &amp;kvm_mmu_notifier_ops;
+       err = mmu_notifier_register(&amp;kvm-&gt;arch.mmu_notifier, current-&gt;mm);
+       if (err) {
+               kfree(kvm);
+               return ERR_PTR(err);
+       }
+
        return kvm;
 }

mmu_notifier_unregister returns void and it's reliable.

The patch also adds a few needed but missing includes that would prevent
kernel to compile after these changes on non-x86 archs (x86 didn't need
them by luck).

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix mm/filemap_xip.c build]
[akpm@linux-foundation.org: fix mm/mmu_notifier.c build]
Signed-off-by: Andrea Arcangeli &lt;andrea@qumranet.com&gt;
Signed-off-by: Nick Piggin &lt;npiggin@suse.de&gt;
Signed-off-by: Christoph Lameter &lt;cl@linux-foundation.org&gt;
Cc: Jack Steiner &lt;steiner@sgi.com&gt;
Cc: Robin Holt &lt;holt@sgi.com&gt;
Cc: Nick Piggin &lt;npiggin@suse.de&gt;
Cc: Peter Zijlstra &lt;a.p.zijlstra@chello.nl&gt;
Cc: Kanoj Sarcar &lt;kanojsarcar@yahoo.com&gt;
Cc: Roland Dreier &lt;rdreier@cisco.com&gt;
Cc: Steve Wise &lt;swise@opengridcomputing.com&gt;
Cc: Avi Kivity &lt;avi@qumranet.com&gt;
Cc: Hugh Dickins &lt;hugh@veritas.com&gt;
Cc: Rusty Russell &lt;rusty@rustcorp.com.au&gt;
Cc: Anthony Liguori &lt;aliguori@us.ibm.com&gt;
Cc: Chris Wright &lt;chrisw@redhat.com&gt;
Cc: Marcelo Tosatti &lt;marcelo@kvack.org&gt;
Cc: Eric Dumazet &lt;dada1@cosmosbay.com&gt;
Cc: "Paul E. McKenney" &lt;paulmck@us.ibm.com&gt;
Cc: Izik Eidus &lt;izike@qumranet.com&gt;
Cc: Anthony Liguori &lt;aliguori@us.ibm.com&gt;
Cc: Rik van Riel &lt;riel@redhat.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages.
 There are secondary MMUs (with secondary sptes and secondary tlbs) too.
sptes in the kvm case are shadow pagetables, but when I say spte in
mmu-notifier context, I mean "secondary pte".  In GRU case there's no
actual secondary pte and there's only a secondary tlb because the GRU
secondary MMU has no knowledge about sptes and every secondary tlb miss
event in the MMU always generates a page fault that has to be resolved by
the CPU (this is not the case of KVM where the a secondary tlb miss will
walk sptes in hardware and it will refill the secondary tlb transparently
to software if the corresponding spte is present).  The same way
zap_page_range has to invalidate the pte before freeing the page, the spte
(and secondary tlb) must also be invalidated before any page is freed and
reused.

Currently we take a page_count pin on every page mapped by sptes, but that
means the pages can't be swapped whenever they're mapped by any spte
because they're part of the guest working set.  Furthermore a spte unmap
event can immediately lead to a page to be freed when the pin is released
(so requiring the same complex and relatively slow tlb_gather smp safe
logic we have in zap_page_range and that can be avoided completely if the
spte unmap event doesn't require an unpin of the page previously mapped in
the secondary MMU).

The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk-&gt;mm and know
when the VM is swapping or freeing or doing anything on the primary MMU so
that the secondary MMU code can drop sptes before the pages are freed,
avoiding all page pinning and allowing 100% reliable swapping of guest
physical address space.  Furthermore it avoids the code that teardown the
mappings of the secondary MMU, to implement a logic like tlb_gather in
zap_page_range that would require many IPI to flush other cpu tlbs, for
each fixed number of spte unmapped.

To make an example: if what happens on the primary MMU is a protection
downgrade (from writeable to wrprotect) the secondary MMU mappings will be
invalidated, and the next secondary-mmu-page-fault will call
get_user_pages and trigger a do_wp_page through get_user_pages if it
called get_user_pages with write=1, and it'll re-establishing an updated
spte or secondary-tlb-mapping on the copied page.  Or it will setup a
readonly spte or readonly tlb mapping if it's a guest-read, if it calls
get_user_pages with write=0.  This is just an example.

This allows to map any page pointed by any pte (and in turn visible in the
primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an
full MMU with both sptes and secondary-tlb like the shadow-pagetable layer
with kvm), or a remote DMA in software like XPMEM (hence needing of
schedule in XPMEM code to send the invalidate to the remote node, while no
need to schedule in kvm/gru as it's an immediate event like invalidating
primary-mmu pte).

At least for KVM without this patch it's impossible to swap guests
reliably.  And having this feature and removing the page pin allows
several other optimizations that simplify life considerably.

Dependencies:

1) mm_take_all_locks() to register the mmu notifier when the whole VM
   isn't doing anything with "mm".  This allows mmu notifier users to keep
   track if the VM is in the middle of the invalidate_range_begin/end
   critical section with an atomic counter incraese in range_begin and
   decreased in range_end.  No secondary MMU page fault is allowed to map
   any spte or secondary tlb reference, while the VM is in the middle of
   range_begin/end as any page returned by get_user_pages in that critical
   section could later immediately be freed without any further
   -&gt;invalidate_page notification (invalidate_range_begin/end works on
   ranges and -&gt;invalidate_page isn't called immediately before freeing
   the page).  To stop all page freeing and pagetable overwrites the
   mmap_sem must be taken in write mode and all other anon_vma/i_mmap
   locks must be taken too.

2) It'd be a waste to add branches in the VM if nobody could possibly
   run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if
   CONFIG_KVM=m/y.  In the current kernel kvm won't yet take advantage of
   mmu notifiers, but this already allows to compile a KVM external module
   against a kernel with mmu notifiers enabled and from the next pull from
   kvm.git we'll start using them.  And GRU/XPMEM will also be able to
   continue the development by enabling KVM=m in their config, until they
   submit all GRU/XPMEM GPLv2 code to the mainline kernel.  Then they can
   also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n).
   This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM
   are all =n.

The mmu_notifier_register call can fail because mm_take_all_locks may be
interrupted by a signal and return -EINTR.  Because mmu_notifier_reigster
is used when a driver startup, a failure can be gracefully handled.  Here
an example of the change applied to kvm to register the mmu notifiers.
Usually when a driver startups other allocations are required anyway and
-ENOMEM failure paths exists already.

 struct  kvm *kvm_arch_create_vm(void)
 {
        struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL);
+       int err;

        if (!kvm)
                return ERR_PTR(-ENOMEM);

        INIT_LIST_HEAD(&amp;kvm-&gt;arch.active_mmu_pages);

+       kvm-&gt;arch.mmu_notifier.ops = &amp;kvm_mmu_notifier_ops;
+       err = mmu_notifier_register(&amp;kvm-&gt;arch.mmu_notifier, current-&gt;mm);
+       if (err) {
+               kfree(kvm);
+               return ERR_PTR(err);
+       }
+
        return kvm;
 }

mmu_notifier_unregister returns void and it's reliable.

The patch also adds a few needed but missing includes that would prevent
kernel to compile after these changes on non-x86 archs (x86 didn't need
them by luck).

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix mm/filemap_xip.c build]
[akpm@linux-foundation.org: fix mm/mmu_notifier.c build]
Signed-off-by: Andrea Arcangeli &lt;andrea@qumranet.com&gt;
Signed-off-by: Nick Piggin &lt;npiggin@suse.de&gt;
Signed-off-by: Christoph Lameter &lt;cl@linux-foundation.org&gt;
Cc: Jack Steiner &lt;steiner@sgi.com&gt;
Cc: Robin Holt &lt;holt@sgi.com&gt;
Cc: Nick Piggin &lt;npiggin@suse.de&gt;
Cc: Peter Zijlstra &lt;a.p.zijlstra@chello.nl&gt;
Cc: Kanoj Sarcar &lt;kanojsarcar@yahoo.com&gt;
Cc: Roland Dreier &lt;rdreier@cisco.com&gt;
Cc: Steve Wise &lt;swise@opengridcomputing.com&gt;
Cc: Avi Kivity &lt;avi@qumranet.com&gt;
Cc: Hugh Dickins &lt;hugh@veritas.com&gt;
Cc: Rusty Russell &lt;rusty@rustcorp.com.au&gt;
Cc: Anthony Liguori &lt;aliguori@us.ibm.com&gt;
Cc: Chris Wright &lt;chrisw@redhat.com&gt;
Cc: Marcelo Tosatti &lt;marcelo@kvack.org&gt;
Cc: Eric Dumazet &lt;dada1@cosmosbay.com&gt;
Cc: "Paul E. McKenney" &lt;paulmck@us.ibm.com&gt;
Cc: Izik Eidus &lt;izike@qumranet.com&gt;
Cc: Anthony Liguori &lt;aliguori@us.ibm.com&gt;
Cc: Rik van Riel &lt;riel@redhat.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mm: remove mm_init compilation dependency on CONFIG_DEBUG_MEMORY_INIT</title>
<updated>2008-07-24T17:47:17+00:00</updated>
<author>
<name>Nishanth Aravamudan</name>
<email>nacc@us.ibm.com</email>
</author>
<published>2008-07-24T04:27:39+00:00</published>
<link rel='alternate' type='text/html' href='http://rtsrv.cs.unc.edu/cgit/cgit.cgi/litmus-rt.git/commit/?id=5e9426abe209cf134adbbd62c5e73ef534eb73e9'/>
<id>5e9426abe209cf134adbbd62c5e73ef534eb73e9</id>
<content type='text'>
Towards the end of putting all core mm initialization in mm_init.c, I
plan on putting the creation of a mm kobject in a function in that file.
However, the file is currently only compiled if CONFIG_DEBUG_MEMORY_INIT
is set. Remove this dependency, but put the code under an #ifdef on the
same config option. This should result in no functional changes.

Signed-off-by: Nishanth Aravamudan &lt;nacc@us.ibm.com&gt;
Cc: Nick Piggin &lt;nickpiggin@yahoo.com.au&gt;
Cc: Mel Gorman &lt;mel@csn.ul.ie&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Towards the end of putting all core mm initialization in mm_init.c, I
plan on putting the creation of a mm kobject in a function in that file.
However, the file is currently only compiled if CONFIG_DEBUG_MEMORY_INIT
is set. Remove this dependency, but put the code under an #ifdef on the
same config option. This should result in no functional changes.

Signed-off-by: Nishanth Aravamudan &lt;nacc@us.ibm.com&gt;
Cc: Nick Piggin &lt;nickpiggin@yahoo.com.au&gt;
Cc: Mel Gorman &lt;mel@csn.ul.ie&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mm: add a basic debugging framework for memory initialisation</title>
<updated>2008-07-24T17:47:13+00:00</updated>
<author>
<name>Mel Gorman</name>
<email>mel@csn.ul.ie</email>
</author>
<published>2008-07-24T04:26:49+00:00</published>
<link rel='alternate' type='text/html' href='http://rtsrv.cs.unc.edu/cgit/cgit.cgi/litmus-rt.git/commit/?id=6b74ab97bc12ce74acec900f1d89a4aee2e4d70d'/>
<id>6b74ab97bc12ce74acec900f1d89a4aee2e4d70d</id>
<content type='text'>
Boot initialisation is very complex, with significant numbers of
architecture-specific routines, hooks and code ordering.  While significant
amounts of the initialisation is architecture-independent, it trusts the data
received from the architecture layer.  This is a mistake, and has resulted in
a number of difficult-to-diagnose bugs.

This patchset adds some validation and tracing to memory initialisation.  It
also introduces a few basic defensive measures.  The validation code can be
explicitly disabled for embedded systems.

This patch:

Add additional debugging and verification code for memory initialisation.

Once enabled, the verification checks are always run and when required
additional debugging information may be outputted via a mminit_loglevel=
command-line parameter.

The verification code is placed in a new file mm/mm_init.c.  Ideally other mm
initialisation code will be moved here over time.

Signed-off-by: Mel Gorman &lt;mel@csn.ul.ie&gt;
Cc: Christoph Lameter &lt;cl@linux-foundation.org&gt;
Cc: Andy Whitcroft &lt;apw@shadowen.org&gt;
Cc: Ingo Molnar &lt;mingo@elte.hu&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Boot initialisation is very complex, with significant numbers of
architecture-specific routines, hooks and code ordering.  While significant
amounts of the initialisation is architecture-independent, it trusts the data
received from the architecture layer.  This is a mistake, and has resulted in
a number of difficult-to-diagnose bugs.

This patchset adds some validation and tracing to memory initialisation.  It
also introduces a few basic defensive measures.  The validation code can be
explicitly disabled for embedded systems.

This patch:

Add additional debugging and verification code for memory initialisation.

Once enabled, the verification checks are always run and when required
additional debugging information may be outputted via a mminit_loglevel=
command-line parameter.

The verification code is placed in a new file mm/mm_init.c.  Ideally other mm
initialisation code will be moved here over time.

Signed-off-by: Mel Gorman &lt;mel@csn.ul.ie&gt;
Cc: Christoph Lameter &lt;cl@linux-foundation.org&gt;
Cc: Andy Whitcroft &lt;apw@shadowen.org&gt;
Cc: Ingo Molnar &lt;mingo@elte.hu&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>uaccess: add probe_kernel_write()</title>
<updated>2008-04-17T18:05:36+00:00</updated>
<author>
<name>Ingo Molnar</name>
<email>mingo@elte.hu</email>
</author>
<published>2008-04-17T18:05:36+00:00</published>
<link rel='alternate' type='text/html' href='http://rtsrv.cs.unc.edu/cgit/cgit.cgi/litmus-rt.git/commit/?id=c33fa9f5609e918824446ef9a75319d4a802f1f4'/>
<id>c33fa9f5609e918824446ef9a75319d4a802f1f4</id>
<content type='text'>
add probe_kernel_read() and probe_kernel_write().

Uninlined and restricted to kernel range memory only, as suggested
by Linus.

Signed-off-by: Ingo Molnar &lt;mingo@elte.hu&gt;
Reviewed-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
add probe_kernel_read() and probe_kernel_write().

Uninlined and restricted to kernel range memory only, as suggested
by Linus.

Signed-off-by: Ingo Molnar &lt;mingo@elte.hu&gt;
Reviewed-by: Thomas Gleixner &lt;tglx@linutronix.de&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Memory controller: rename to Memory Resource Controller</title>
<updated>2008-03-05T00:35:12+00:00</updated>
<author>
<name>Balbir Singh</name>
<email>balbir@linux.vnet.ibm.com</email>
</author>
<published>2008-03-04T22:28:39+00:00</published>
<link rel='alternate' type='text/html' href='http://rtsrv.cs.unc.edu/cgit/cgit.cgi/litmus-rt.git/commit/?id=00f0b8259e48979c37212995d798f3fbd0374690'/>
<id>00f0b8259e48979c37212995d798f3fbd0374690</id>
<content type='text'>
Rename Memory Controller to Memory Resource Controller.  Reflect the same
changes in the CONFIG definition for the Memory Resource Controller.  Group
together the config options for Resource Counters and Memory Resource
Controller.

Signed-off-by: Balbir Singh &lt;balbir@linux.vnet.ibm.com&gt;
Cc: Paul Menage &lt;menage@google.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Rename Memory Controller to Memory Resource Controller.  Reflect the same
changes in the CONFIG definition for the Memory Resource Controller.  Group
together the config options for Resource Counters and Memory Resource
Controller.

Signed-off-by: Balbir Singh &lt;balbir@linux.vnet.ibm.com&gt;
Cc: Paul Menage &lt;menage@google.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Memory controller: cgroups setup</title>
<updated>2008-02-07T16:42:18+00:00</updated>
<author>
<name>Balbir Singh</name>
<email>balbir@linux.vnet.ibm.com</email>
</author>
<published>2008-02-07T08:13:50+00:00</published>
<link rel='alternate' type='text/html' href='http://rtsrv.cs.unc.edu/cgit/cgit.cgi/litmus-rt.git/commit/?id=8cdea7c05454260c0d4d83503949c358eb131d17'/>
<id>8cdea7c05454260c0d4d83503949c358eb131d17</id>
<content type='text'>
Setup the memory cgroup and add basic hooks and controls to integrate
and work with the cgroup.

Signed-off-by: Balbir Singh &lt;balbir@linux.vnet.ibm.com&gt;
Cc: Pavel Emelianov &lt;xemul@openvz.org&gt;
Cc: Paul Menage &lt;menage@google.com&gt;
Cc: Peter Zijlstra &lt;a.p.zijlstra@chello.nl&gt;
Cc: "Eric W. Biederman" &lt;ebiederm@xmission.com&gt;
Cc: Nick Piggin &lt;nickpiggin@yahoo.com.au&gt;
Cc: Kirill Korotaev &lt;dev@sw.ru&gt;
Cc: Herbert Poetzl &lt;herbert@13thfloor.at&gt;
Cc: David Rientjes &lt;rientjes@google.com&gt;
Cc: Vaidyanathan Srinivasan &lt;svaidy@linux.vnet.ibm.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Setup the memory cgroup and add basic hooks and controls to integrate
and work with the cgroup.

Signed-off-by: Balbir Singh &lt;balbir@linux.vnet.ibm.com&gt;
Cc: Pavel Emelianov &lt;xemul@openvz.org&gt;
Cc: Paul Menage &lt;menage@google.com&gt;
Cc: Peter Zijlstra &lt;a.p.zijlstra@chello.nl&gt;
Cc: "Eric W. Biederman" &lt;ebiederm@xmission.com&gt;
Cc: Nick Piggin &lt;nickpiggin@yahoo.com.au&gt;
Cc: Kirill Korotaev &lt;dev@sw.ru&gt;
Cc: Herbert Poetzl &lt;herbert@13thfloor.at&gt;
Cc: David Rientjes &lt;rientjes@google.com&gt;
Cc: Vaidyanathan Srinivasan &lt;svaidy@linux.vnet.ibm.com&gt;
Signed-off-by: Andrew Morton &lt;akpm@linux-foundation.org&gt;
Signed-off-by: Linus Torvalds &lt;torvalds@linux-foundation.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branch 'dmapool' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc</title>
<updated>2008-02-06T03:05:48+00:00</updated>
<author>
<name>Linus Torvalds</name>
<email>torvalds@woody.linux-foundation.org</email>
</author>
<published>2008-02-06T03:05:48+00:00</published>
<link rel='alternate' type='text/html' href='http://rtsrv.cs.unc.edu/cgit/cgit.cgi/litmus-rt.git/commit/?id=b297d520b9af536d5580ac505dd316be4cf5560c'/>
<id>b297d520b9af536d5580ac505dd316be4cf5560c</id>
<content type='text'>
* 'dmapool' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc:
  pool: Improve memory usage for devices which can't cross boundaries
  Change dmapool free block management
  dmapool: Tidy up includes and add comments
  dmapool: Validate parameters to dma_pool_create
  Avoid taking waitqueue lock in dmapool
  dmapool: Fix style problems
  Move dmapool.c to mm/ directory
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
* 'dmapool' of git://git.kernel.org/pub/scm/linux/kernel/git/willy/misc:
  pool: Improve memory usage for devices which can't cross boundaries
  Change dmapool free block management
  dmapool: Tidy up includes and add comments
  dmapool: Validate parameters to dma_pool_create
  Avoid taking waitqueue lock in dmapool
  dmapool: Fix style problems
  Move dmapool.c to mm/ directory
</pre>
</div>
</content>
</entry>
</feed>
