Since when we start discussions about the usage Media Controller for complex hardware, one thing become clear: the way it is, MC fails to map anything different than capture/output/m2m video-only streaming. The point is that MC has entities named as devnodes, but the only devnode used (before the DVB patches) is MEDIA_ENT_T_DEVNODE_V4L. Due to the way MC got implemented, however, this entity actually doesn't represent the devnode, but the hardware I/O engine that receives data via DMA. By coincidence, such DMA is associated with the V4L device node on webcam hardware, but this is not true even for other V4L2 devices. For example, on USB hardware, the DMA is done via the USB controller. The data passes though a in-kernel filter that strips off the URB headers. Other V4L2 devices like radio may not even have DMA. When it have, the DMA is done via ALSA, and not via the V4L devnode. In other words, MC is broken as a whole, but tagging it as BROKEN right now would do more harm than good. So, instead, let's mark, for now, the DVB part as broken and block all new changes to MC while we fix this mess, whith we hopefully will do for the next Kernel version. Requested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull media fixes from Mauro Carvalho Chehab:
"Three driver fixes:
- fix for omap4, fixing a regression due to a subsystem API that got
removed for 4.1 (commit efde234674d9);
- fix for one of the formats supported by Marvel ccic driver;
- fix rcar_vin driver that, when stopping abnormally, the driver
can't return from wait_for_completion"
* tag 'media/v4.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] v4l: omap4iss: Replace outdated OMAP4 control pad API with syscon
[media] media: soc_camera: rcar_vin: Fix wait_for_completion
[media] marvell-ccic: fix Y'CbCr ordering
When stopping abnormally, a driver can't return from wait_for_completion. This patch resolved this problem by changing wait_for_completion_timeout from wait_for_completion. Signed-off-by: Koji Matsuoka <koji.matsuoka.xm@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Various formats had their byte ordering implemented incorrectly, and
the V4L2_PIX_FMT_UYVY is actually impossible to create, instead you
get V4L2_PIX_FMT_YVYU.
This was working before commit ad6ac452227b7cb93ac79beec092850d178740b1
("add new formats support for marvell-ccic driver"). That commit broke
the original format support and the OLPC XO-1 laptop showed wrong
colors ever since (if you are crazy enough to attempt to run the latest
kernel on it, like I did).
The email addresses of the authors of that patch are no longer valid,
so without a way to reach them and ask them about their test setup
I am going with what I can test on the OLPC laptop.
If this breaks something for someone on their non-OLPC setup, then
contact the linux-media mailinglist. My suspicion however is that
that commit went in untested.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Cc: <stable@vger.kernel.org> # for v3.19 and up
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull dma-buf updates from Sumit Semwal: "Minor cleanup only; this could've gone in for the 4.0 merge window, but for a copy-paste stupidity from me. It has been in the for-next since then, and no issues reported. - cleanup of dma_buf_export() - correction of copy-paste stupidity while doing the cleanup" * tag 'dma-buf-for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf: staging: android: ion: fix wrong init of dma_buf_export_info dma-buf: cleanup dma_buf_export() to make it easily extensible
My 'allmodconfig' build is _almost_ free of warnings, and most of the
remaining ones are for legacy drivers that just do bad things that I
can't find it in my black heart to care too much about. But this one
was just annoying me:
drivers/media/v4l2-core/videobuf2-core.c:3256:26: warning: unused variable ‘fileio’ [-Wunused-variable]
because commit 0e661006370b ("[media] vb2: fix 'UNBALANCED' warnings
when calling vb2_thread_stop()") removed all users of 'fileio' and
instead calls "__vb2_cleanup_fileio(q)" to clean up q->fileio. But the
now unused 'fileio' variable was left around.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* 'drm-next-merged' of git://people.freedesktop.org/~airlied/linux: (9717 commits) media-bus: Fixup RGB444_1X12, RGB565_1X16, and YUV8_1X24 media bus format hexdump: avoid warning in test function fs: take i_mutex during prepare_binprm for set[ug]id executables smp: Fix error case handling in smp_call_function_*() iommu-common: Fix PARISC compile-time warnings sparc: Make LDC use common iommu poll management functions sparc: Make sparc64 use scalable lib/iommu-common.c functions Break up monolithic iommu table/lock into finer graularity pools and lock sparc: Revert generic IOMMU allocator. tools/power turbostat: correct dumped pkg-cstate-limit value tools/power turbostat: calculate TSC frequency from CPUID(0x15) on SKL tools/power turbostat: correct DRAM RAPL units on recent Xeon processors tools/power turbostat: Initial Skylake support tools/power turbostat: Use $(CURDIR) instead of $(PWD) and add support for O= option in Makefile tools/power turbostat: modprobe msr, if needed tools/power turbostat: dump MSR_TURBO_RATIO_LIMIT2 tools/power turbostat: use new MSR_TURBO_RATIO_LIMIT names Bluetooth: hidp: Fix regression with older userspace and flags validation config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected perf/x86/intel/pt: Fix and clean up error handling in pt_event_add() ... That solves several merge conflicts: Documentation/DocBook/media/v4l/subdev-formats.xml Documentation/devicetree/bindings/vendor-prefixes.txt drivers/staging/media/mn88473/mn88473.c include/linux/kconfig.h include/uapi/linux/media-bus-format.h The ones at subdev-formats.xml and media-bus-format.h are not trivial. That's why we opted to merge from DRM.
At present, dma_buf_export() takes a series of parameters, which makes it difficult to add any new parameters for exporters, if required. Make it simpler by moving all these parameters into a struct, and pass the struct * as parameter to dma_buf_export(). While at it, unite dma_buf_export_named() with dma_buf_export(), and change all callers accordingly. Reviewed-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
* patchwork: (404 commits) [media] uvcvideo: add support for VIDIOC_QUERY_EXT_CTRL [media] uvcvideo: fix cropcap v4l2-compliance failure [media] media: omap3isp: remove unused clkdev [media] coda: Add tracing support [media] coda: drop dma_sync_single_for_device in coda_bitstream_queue [media] coda: fix fill bitstream errors in nonstreaming case [media] coda: call SEQ_END when the first queue is stopped [media] coda: fail to start streaming if userspace set invalid formats [media] coda: remove duplicate error messages for buffer allocations [media] coda: move parameter buffer in together with context buffer allocation [media] coda: allocate bitstream buffer from REQBUFS, size depends on the format [media] coda: allocate per-context buffers from REQBUFS [media] coda: use strlcpy instead of snprintf [media] coda: bitstream payload is unsigned [media] coda: fix double call to debugfs_remove [media] coda: check kasprintf return value in coda_open [media] coda: bitrate can only be set in kbps steps [media] v4l2-mem2mem: no need to initialize b in v4l2_m2m_next_buf and v4l2_m2m_buf_remove [media] s5p-mfc: set allow_zero_bytesused flag for vb2_queue_init [media] coda: set allow_zero_bytesused flag for vb2_queue_init ...