litmus-rt.git/drivers/macintosh/Makefile, branch v2015.1

macintosh: therm_pm72: delete deprecated driver

2014-12-19T18:32:47+00:00

The new driver is around for more than 2 years now, so the old one can
go. Getting rid of it helps the removal of the legacy .attach_adapter
callback of the I2C subsystem.

Signed-off-by: Wolfram Sang 
Acked-by: Benjamin Herrenschmidt

powerpc/windfarm: Fix XServe G5 fan control Makefile issue

2013-11-27T00:35:47+00:00

We are missing building windfarm_max6690_sensor.o when building
CONFIG_WINDFARM_RM31. Usually all the windfarm drivers are built
and thus this isn't a problem but some more "tailored" setups
(Gentoo ?) building only that driver are not working because
the require sensor module is missing.

Reported-by: Stanislav Ponomarev 
Signed-off-by: Benjamin Herrenschmidt

powerpc/powermac: New windfarm driver for PowerMac G5 (AGP) and Xserve G5

2012-04-30T05:37:25+00:00

This replaces the old therm_pm72 using the same windfarm infrastructure
that was used for other PowerMac G5 models. The fan speeds and sensors
should now be visible in the same location in sysfs.

The driver is split into separate core modules for PowerMac7,2 (and 7,3)
and RackMac3,1, with a lot of the shared code now in the separate sensor
and control modules.

Signed-off-by: Benjamin Herrenschmidt

Move ams driver to macintosh

2010-10-28T18:31:50+00:00

The ams driver isn't a hardware monitoring driver, so it shouldn't
live under driver/hwmon. drivers/macintosh seems much more
appropriate, as the driver is only useful on PowerBooks and iBooks.

Signed-off-by: Jean Delvare 
Cc: Guenter Roeck 
Cc: Stelian Pop 
Cc: Michael Hanselmann 
Cc: Benjamin Herrenschmidt 
Cc: Grant Likely

[POWERPC] windfarm: Add PowerMac 12,1 support

2008-04-29T05:57:35+00:00

This implements a new driver named windfarm_pm121, which drives the
fans on PowerMac 12,1 machines : iMac G5 iSight (rev C) 17" and
20".  It's based on the windfarm_pm81 driver from Benjamin
Herrenschmidt.

This includes fixes from David Woodhouse correcting the names of some
of the sensors.

Signed-off-by: Étienne Bersac 
Signed-off-by: David Woodhouse 
Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras

[POWERPC] Xserve cpu-meter driver

2006-12-04T09:39:30+00:00

This is a small driver for the Xserve G5 CPU-meter blue LEDs on the
front-panel. It might work on the Xserve G4 as well though that was
not tested. It's pretty basic and could use some improvements if
somebody cares doing them. :)

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras

[POWERPC] Convert powermac ide blink to new led infrastructure

2006-06-28T01:51:12+00:00

This patch removes the old pmac ide led blink code and
adds generic LED subsystem support for the LED.

It maintains backward compatibility with the old
BLK_DEV_IDE_PMAC_BLINK Kconfig option which now
simply selects the new code and influences the
default trigger.

Signed-off-by: Johannes Berg 
Acked-by: Benjamin Herrenschmidt 
Signed-off-by: Paul Mackerras

Input: via-pmu - add input device support

2006-06-26T05:49:55+00:00

Add an input device for the button and lid switch so that userspace gets
notified about the user pressing them via the standard input layer.

Signed-off-by: Johannes Berg 
Signed-off-by: Andrew Morton 
Signed-off-by: Dmitry Torokhov

[PATCH] Rewritten backlight infrastructure for portable Apple computers

2006-06-25T17:00:59+00:00

This patch contains a total rewrite of the backlight infrastructure for
portable Apple computers.  Backward compatibility is retained.  A sysfs
interface allows userland to control the brightness with more steps than
before.  Userland is allowed to upload a brightness curve for different
monitors, similar to Mac OS X.

[akpm@osdl.org: add needed exports]
Signed-off-by: Michael Hanselmann 
Acked-by: Benjamin Herrenschmidt 
Cc: Richard Purdie 
Cc: "Antonino A. Daplas" 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

[PATCH] powerpc: Thermal control for dual core G5s

2006-02-08T06:05:14+00:00

This patch adds a windfarm module, windfarm_pm112, for the dual core G5s
(both 2 and 4 core models), keeping the machine from getting into
vacuum-cleaner mode ;) For proper credits, the patch was initially
written by Paul Mackerras, and slightly reworked by me to add overtemp
handling among others. The patch also removes the sysfs attributes from
windfarm_pm81 and windfarm_pm91 and instead adds code to the windfarm
core to automagically expose attributes for sensor & controls.

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Linus Torvalds