litmus-rt.git/drivers/i2c/muxes, branch master

i2c: i2c-mux-gpio: remove error messages for probe deferrals

2015-04-03T20:00:14+00:00

Probe deferral is not an error case. It happens only when
the necessary dependencies are not there yet.

The driver core is already printing a message when a driver
requests probe deferral, so this can be traced in the logs
without these error prints.

This patch removes the error messages for these deferral cases.

Signed-off-by: Ionut Nicu 
Acked-by: Alexander Sverdlin 
Acked-by: Peter Korsgaard 
Signed-off-by: Wolfram Sang

i2c: pca954x: improve usage of gpiod API

2015-03-09T09:51:59+00:00

Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for
outputs.

Also there is an *_optional variant that serves well here.  The sematics
is slightly changed here by using it. Now if a reset gpio is specified
and getting hold on it fails, pca954x_probe fails, too.

Signed-off-by: Uwe Kleine-König 
Acked-by: Laurent Pinchart 
Signed-off-by: Wolfram Sang

of: i2c: Add i2c-mux-idle-disconnect DT property to PCA954x mux driver

2015-01-23T16:12:56+00:00

Add i2c-mux-idle-disconnect device tree property to PCA954x mux driver. The new
property forces the multiplexer to disconnect child buses in idle state. This is
used, for example, when there are several multiplexers on the same bus and the
devices on the underlying buses might have same I2C addresses.

Signed-off-by: Alexander Sverdlin 
[wsa: added a newline]
Signed-off-by: Wolfram Sang

i2c: muxes: drop owner assignment from platform_drivers

2014-10-20T14:20:38+00:00

A platform_driver does not need to set an owner, it will be populated by the
driver core.

Signed-off-by: Wolfram Sang

Merge branch 'i2c/for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2014-08-09T16:15:07+00:00

Pull i2c updates from Wolfram Sang:
 "Highlights:

   - class based instantiation finally dropped for most embedded drivers
     bringing boot up performance gains
   - removed two drivers (one outdated, one a duplicate)
   - ACPI has now operation region support (thanks to Lan Tianyu)
   - the i2c-stub driver got overhauled and gained new features to
     become more useful when writing i2c client drivers (thanks to
     Guenter Roeck and Jean Delvare)

  The rest is driver bugfixes, added bindings/ids, cleanups..."

* 'i2c/for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (43 commits)
  i2c: mpc: delete unneeded test before of_node_put
  i2c: rk3x: fix interrupt handling issue
  i2c: imx: Fix format warning for dev_dbg
  i2c: qup: disable clks and return instead of just returning error
  i2c: exynos5: always enable HSI2C
  i2c: designware: add new bindings
  i2c: gpio: Drop dead code in i2c_gpio_remove
  i2c: pca954x: put the mux to disconnected state after resume
  i2c: st: Update i2c timings
  drivers/i2c/busses: use correct type for dma_map/unmap
  i2c: i2c-st: Use %pa to print 'resource_size_t' type
  i2c: s3c2410: resume the I2C controller earlier
  i2c: stub: Avoid an array overrun on I2C block transfers
  i2c: i801: Add device ID for Intel Wildcat Point PCH
  i2c: i801: Fix the alignment of the device table
  i2c: stub: Add support for banked register ranges
  i2c: stub: Remember the number of emulated chips
  i2c: stub: Add support for SMBus block commands
  i2c: efm32: correct namespacing of location property
  i2c: exynos5: remove extra line and fix an assignment
  ...

i2c: pca954x: put the mux to disconnected state after resume

2014-08-01T17:54:59+00:00

pca954x may be power lost during suspend, so after resume we also suffer
the issue fixed by commit cd823db8b1161ef0d756514d280715a576d65cc3,

 "pca954x power-on default is channel 0 connected. If multiple pca954x
 muxes are connected to the same physical I2C bus, the parent bus will
 see channel 0 devices behind both muxes by default."

What's more, when resume bootloader may also operate the mux, so the
the channel connected after that may not be the one driver thought.

We fix this problem by putting the mux to disconnected state and
clearing last_chan in the resume hook.

Signed-off-by: Jisheng Zhang 
Reviewed-by: Jean Delvare 
Acked-by: Laurent Pinchart 
Signed-off-by: Wolfram Sang

i2c: mux: pca954x: fix dependencies

2014-06-27T12:27:19+00:00

This driver causes the following randconfig build error:

drivers/i2c/muxes/i2c-mux-pca954x.c: In function ‘pca954x_probe’:
drivers/i2c/muxes/i2c-mux-pca954x.c:204:2: error: implicit declaration
of function ‘devm_gpiod_get’ [-Werror=implicit-function-declaration]
  gpio = devm_gpiod_get(&client->dev, "reset");
  ^
drivers/i2c/muxes/i2c-mux-pca954x.c:204:7: warning: assignment makes
pointer from integer without a cast [enabled by default]
  gpio = devm_gpiod_get(&client->dev, "reset");
       ^
drivers/i2c/muxes/i2c-mux-pca954x.c:206:3: error: implicit declaration
of function ‘gpiod_direction_output’
[-Werror=implicit-function-declaration]
   gpiod_direction_output(gpio, 0);
   ^
cc1: some warnings being treated as errors
make[3]: *** [drivers/i2c/muxes/i2c-mux-pca954x.o] Error 1

This is because it is getting compiled without gpiolib, so
introduce an explicit dependency.

Reported-by: Jim Davis 
Signed-off-by: Linus Walleij 
Signed-off-by: Wolfram Sang

i2c: pca954x: Fix compilation without CONFIG_GPIOLIB

2014-06-05T13:09:33+00:00

The pca954x driver recently switched to the GPIO descriptor API without
including the correct  header. This breaks
compilation without CONFIG_GPIOLIB.

drivers/i2c/muxes/i2c-mux-pca954x.c: In function ‘pca954x_probe’:
drivers/i2c/muxes/i2c-mux-pca954x.c:204:2: error: implicit declaration
of function ‘devm_gpiod_get’ [-Werror=implicit-function-declaration]
  gpio = devm_gpiod_get(&client->dev, "reset");
  ^
drivers/i2c/muxes/i2c-mux-pca954x.c:204:7: warning: assignment makes
pointer from integer without a cast [enabled by default]
  gpio = devm_gpiod_get(&client->dev, "reset");
       ^
drivers/i2c/muxes/i2c-mux-pca954x.c:206:3: error: implicit declaration
of function ‘gpiod_direction_output’
[-Werror=implicit-function-declaration]
   gpiod_direction_output(gpio, 0);
   ^
cc1: some warnings being treated as errors
make[3]: *** [drivers/i2c/muxes/i2c-mux-pca954x.o] Error 1

Fix it by including the right header.

Reported-by: Jim Davis 
Signed-off-by: Laurent Pinchart 
Signed-off-by: Wolfram Sang

i2c: mux: pca954x: Use the descriptor-based GPIO API

2014-06-03T12:24:20+00:00

The ID-based GPIO API pushes handling of GPIO polarity to drivers.
Simplify the driver by switching to the descriptor-based GPIO API.

This also fixes a mismatch between the pca954x DT bindings that document
a "reset-gpios" property and the driver that requests a "reset-gpio"
property.

Signed-off-by: Laurent Pinchart 
Reviewed-by: Linus Walleij 
Signed-off-by: Wolfram Sang

Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2014-01-30T03:56:20+00:00

Pull more i2c updates from Wolfram Sang:
 "Mostly bugfixes, small but wanted cleanups, and Paul's init.h removal
  applied"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: rcar: fix NACK error code
  i2c: update i2c_algorithm documentation
  i2c: rcar: use devm_clk_get to ensure clock is properly ref-counted
  i2c: rcar: do not print error if device nacks transfer
  i2c: rely on driver core when sanitizing devices
  i2c: delete non-required instances of include 
  i2c: acorn: is tristate and should use module.h
  i2c: piix4: Standardize log messages
  i2c: piix4: Use different message for AMD Auxiliary SMBus Controller
  i2c: piix4: Add support for AMD ML and CZ SMBus changes