The first user of the i2c-slave interface is an eeprom simulator. It is
a shared memory which can be accessed by the remote master via I2C and
locally via sysfs.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Commit 5d98e61d337c ("I2C/ACPI: Add i2c ACPI operation region support")
renamed the i2c-core module. This may cause regressions for
distributions, so put the ACPI code back into the core.

Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Tested-by: Lan Tianyu <tianyu.lan@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Commit da3c6647(I2C/ACPI: Clean up I2C ACPI code and Add CONFIG_I2C_ACPI
config) adds a new kernel config I2C_ACPI and make I2C core built in
when the config is selected. This is wrong because distributions
etc generally compile I2C as a module and the commit broken that.
This patch is to rename I2C_ACPI to ACPI_I2C_OPREGION. New config
only controls ACPI I2C operation region code and depends on I2C=y.

Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[wsa: removed unrelated change for Kconfig]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Clean up ACPI related code in the i2c core and add CONFIG_I2C_ACPI
to enable I2C ACPI code.

Current there is a race between removing I2C ACPI operation region
and ACPI AML code accessing. So make i2c core built-in if CONFIG_I2C_ACPI
is set.

Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

ACPI 5.0 spec(5.5.2.4.5) defines GenericSerialBus(i2c, spi, uart) operation region.
It allows ACPI aml code able to access such kind of devices to implement
some ACPI standard method.

ACPI Spec defines some access attribute to associate with i2c protocol.
AttribQuick 	       	       		Read/Write Quick Protocol
AttribSendReceive			Send/Receive Byte Protocol
AttribByte 			 	Read/Write Byte Protocol
AttribWord				Read/Write Word Protocol
AttribBlock				Read/Write Block Protocol
AttribBytes				Read/Write N-Bytes Protocol
AttribProcessCall			Process Call Protocol
AttribBlockProcessCall			Write Block-Read Block Process Call Protocol
AttribRawBytes 				Raw Read/Write N-BytesProtocol
AttribRawProcessBytes			Raw Process Call Protocol

On the Asus T100TA, Bios use GenericSerialBus operation region to access
i2c device to get battery info.

Sample code From Asus T100TA

    Scope (_SB.I2C1)
    {
        Name (UMPC, ResourceTemplate ()
        {
            I2cSerialBus (0x0066, ControllerInitiated, 0x00061A80,
                AddressingMode7Bit, "\\_SB.I2C1",
                0x00, ResourceConsumer, ,
                )
        })

	...

        OperationRegion (DVUM, GenericSerialBus, Zero, 0x0100)
        Field (DVUM, BufferAcc, NoLock, Preserve)
        {
            Connection (UMPC),
            Offset (0x81),
            AccessAs (BufferAcc, AttribBytes (0x3E)),
            FGC0,   8
        }
	...
     }

     Device (BATC)
     {
         Name (_HID, EisaId ("PNP0C0A"))  // _HID: Hardware ID
         Name (_UID, One)  // _UID: Unique ID
	 ...

            Method (_BST, 0, NotSerialized)  // _BST: Battery Status
            {
                If (LEqual (AVBL, One))
                {
                    Store (FGC0, BFFG)
                    If (LNotEqual (STAT, One))
                    {
                        ShiftRight (CHST, 0x04, Local0)
                        And (Local0, 0x03, Local0)
                        If (LOr (LEqual (Local0, One), LEqual (Local0, 0x02)))
                        {
                            Store (0x02, Local1)
                        }
	...

    }

The i2c operation region is defined under I2C1 scope. _BST method under
battery device BATC read battery status from the field "FCG0". The request
would be sent to i2c operation region handler.

This patch is to add i2c ACPI operation region support. Due to there are
only "Byte" and "Bytes" protocol access on the Asus T100TA, other protocols
have not been tested.

About RawBytes and RawProcessBytes protocol, they needs specific drivers to interpret
reference data from AML code according ACPI 5.0 SPEC(5.5.2.4.5.3.9 and 5.5.2.4.5.3.10).
So far, not found such case and will add when find real case.

Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Move the i2c-stub driver to drivers/i2c, to match the Kconfig entry.
This is less confusing that way.

I also fixed all checkpatch warnings and errors.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Peter Huewe <peterhuewe@gmx.de>

The last legitimate user of i2c_driver.attach_adapter and
.detach_adapter is gone, so we can finally deprecate these callbacks.
The last few drivers which still use these will have to be updated to
make use of standard I2C device instantiation ways instead.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

Replace EXTRA_CFLAGS with ccflags-y.

Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

I2C driver for PCA954x I2C multiplexer series.

Signed-off-by: Michael Lawnick <ml.lawnick@gmx.de>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

Add multiplexed bus core support. I2C multiplexer and switches
like pca954x get instantiated as new adapters per port.

Signed-off-by: Michael Lawnick <ml.lawnick@gmx.de>
Acked-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Jean Delvare <khali@linux-fr.org>