litmus-rt.git/arch/x86/mm/Makefile, branch master

mm: move memtest under mm

2015-04-14T23:49:06+00:00

Memtest is a simple feature which fills the memory with a given set of
patterns and validates memory contents, if bad memory regions is detected
it reserves them via memblock API.  Since memblock API is widely used by
other architectures this feature can be enabled outside of x86 world.

This patch set promotes memtest to live under generic mm umbrella and
enables memtest feature for arm/arm64.

It was reported that this patch set was useful for tracking down an issue
with some errant DMA on an arm64 platform.

This patch (of 6):

There is nothing platform dependent in the core memtest code, so other
platforms might benefit from this feature too.

[linux@roeck-us.net: MEMTEST depends on MEMBLOCK]
Signed-off-by: Vladimir Murzin 
Acked-by: Will Deacon 
Tested-by: Mark Rutland 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Catalin Marinas 
Cc: Russell King 
Cc: Paul Bolle 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

x86_64: add KASan support

2015-02-14T05:21:41+00:00

This patch adds arch specific code for kernel address sanitizer.

16TB of virtual addressed used for shadow memory.  It's located in range
[ffffec0000000000 - fffffc0000000000] between vmemmap and %esp fixup
stacks.

At early stage we map whole shadow region with zero page.  Latter, after
pages mapped to direct mapping address range we unmap zero pages from
corresponding shadow (see kasan_map_shadow()) and allocate and map a real
shadow memory reusing vmemmap_populate() function.

Also replace __pa with __pa_nodebug before shadow initialized.  __pa with
CONFIG_DEBUG_VIRTUAL=y make external function call (__phys_addr)
__phys_addr is instrumented, so __asan_load could be called before shadow
area initialized.

Signed-off-by: Andrey Ryabinin 
Cc: Dmitry Vyukov 
Cc: Konstantin Serebryany 
Cc: Dmitry Chernenkov 
Signed-off-by: Andrey Konovalov 
Cc: Yuri Gribov 
Cc: Konstantin Khlebnikov 
Cc: Sasha Levin 
Cc: Christoph Lameter 
Cc: Joonsoo Kim 
Cc: Dave Hansen 
Cc: Andi Kleen 
Cc: Ingo Molnar 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin" 
Cc: Christoph Lameter 
Cc: Pekka Enberg 
Cc: David Rientjes 
Cc: Jim Davis 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

x86, mpx: Add MPX-specific mmap interface

2014-11-17T23:58:53+00:00

We have chosen to perform the allocation of bounds tables in
kernel (See the patch "on-demand kernel allocation of bounds
tables") and to mark these VMAs with VM_MPX.

However, there is currently no suitable interface to actually do
this.  Existing interfaces, like do_mmap_pgoff(), have no way to
set a modified ->vm_ops or ->vm_flags and don't hold mmap_sem
long enough to let a caller do it.

This patch wraps mmap_region() and hold mmap_sem long enough to
make the modifications to the VMA which we need.

Also note the 32/64-bit #ifdef in the header.  We actually need
to do this at runtime eventually.  But, for now, we don't support
running 32-bit binaries on 64-bit kernels.  Support for this will
come in later patches.

Signed-off-by: Qiaowei Ren 
Signed-off-by: Dave Hansen 
Cc: linux-mm@kvack.org
Cc: linux-mips@linux-mips.org
Cc: Dave Hansen 
Link: http://lkml.kernel.org/r/20141114151827.CE440F67@viggo.jf.intel.com
Signed-off-by: Thomas Gleixner

x86, trace: Add page fault tracepoints

2013-11-08T22:15:49+00:00

This patch introduces page fault tracepoints to x86 architecture
by switching IDT.

  Two events, for user and kernel spaces, are introduced at the beginning
  of page fault handler for tracing.

  - User space event
    There is a request of page fault event for user space as below.

    https://lkml.kernel.org/r/1368079520-11015-2-git-send-email-fdeslaur+()+gmail+!+com
    https://lkml.kernel.org/r/1368079520-11015-1-git-send-email-fdeslaur+()+gmail+!+com

  - Kernel space event:
    When we measure an overhead in kernel space for investigating performance
    issues, we can check if it comes from the page fault events.

Signed-off-by: Seiji Aguchi 
Link: http://lkml.kernel.org/r/52716E67.6090705@hds.com
Signed-off-by: H. Peter Anvin

memblock, x86: Replace memblock_x86_reserve/free_range() with generic ones

2011-07-14T18:47:53+00:00

Other than sanity check and debug message, the x86 specific version of
memblock reserve/free functions are simple wrappers around the generic
versions - memblock_reserve/free().

This patch adds debug messages with caller identification to the
generic versions and replaces x86 specific ones and kills them.
arch/x86/include/asm/memblock.h and arch/x86/mm/memblock.c are empty
after this change and removed.

Signed-off-by: Tejun Heo 
Link: http://lkml.kernel.org/r/1310462166-31469-14-git-send-email-tj@kernel.org
Cc: Yinghai Lu 
Cc: Benjamin Herrenschmidt 
Cc: Thomas Gleixner 
Cc: Ingo Molnar 
Cc: "H. Peter Anvin" 
Signed-off-by: H. Peter Anvin

x86, NUMA: Rename amdtopology_64.c to amdtopology.c

2011-05-02T15:24:48+00:00

amdtopology is going to be used by 32bit too drop _64 suffix.  This is
pure rename.

Signed-off-by: Tejun Heo 
Cc: Ingo Molnar 
Cc: Yinghai Lu 
Cc: David Rientjes 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin"

x86-32, NUMA: Replace srat_32.c with srat.c

2011-05-02T12:18:53+00:00

SRAT support implementation in srat_32.c and srat.c are generally
similar; however, there are some differences.

First of all, 64bit implementation supports more types of SRAT
entries.  64bit supports x2apic, affinity, memory and SLIT.  32bit
only supports processor and memory.

Most other differences stem from different initialization protocols
employed by 64bit and 32bit NUMA init paths.

On 64bit,

* Mappings among PXM, node and apicid are directly done in each SRAT
  entry callback.

* Memory affinity information is passed to numa_add_memblk() which
  takes care of all interfacing with NUMA init.

* Doesn't directly initialize NUMA configurations.  All the
  information is recorded in numa_nodes_parsed and memblks.

On 32bit,

* Checks numa_off.

* Things go through one more level of indirection via private tables
  but eventually end up initializing the same mappings.

* node_start/end_pfn[] are initialized and
  memblock_x86_register_active_regions() is called for each memory
  chunk.

* node_set_online() is called for each online node.

* sort_node_map() is called.

There are also other minor differences in sanity checking and messages
but taking 64bit version should be good enough.

This patch drops the 32bit specific implementation and makes the 64bit
implementation common for both 32 and 64bit.

The init protocol differences are dealt with in two places - the
numa_add_memblk() shim added in the previous patch and new temporary
numa_32.c:get_memcfg_from_srat() which wraps invocation of
x86_acpi_numa_init().

The shim numa_add_memblk() handles the folowings.

* node_start/end_pfn[] initialization.

* node_set_online() for memory nodes.

* Invocation of memblock_x86_register_active_regions().

The shim get_memcfg_from_srat() handles the followings.

* numa_off check.

* node_set_online() for CPU nodes.

* sort_node_map() invocation.

* Clearing of numa_nodes_parsed and active_ranges on failure.

The shims are temporary and will be removed as the generic NUMA init
path in 32bit is replaced with 64bit one.

Signed-off-by: Tejun Heo 
Cc: Ingo Molnar 
Cc: Yinghai Lu 
Cc: David Rientjes 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin"

x86, NUMA: rename srat_64.c to srat.c

2011-05-02T12:18:52+00:00

Rename srat_64.c to srat.c.  This is to prepare for unification of
NUMA init paths between 32 and 64bit.

Signed-off-by: Tejun Heo 
Cc: Ingo Molnar 
Cc: Yinghai Lu 
Cc: David Rientjes 
Cc: Thomas Gleixner 
Cc: "H. Peter Anvin"

x86-64, NUMA: Move NUMA emulation into numa_emulation.c

2011-02-22T10:10:08+00:00

Create numa_emulation.c and move all NUMA emulation code there.  The
definitions of struct numa_memblk and numa_meminfo are moved to
numa_64.h.  Also, numa_remove_memblk_from(), numa_cleanup_meminfo(),
numa_reset_distance() along with numa_emulation() are made global.

- v2: Internal declarations moved to numa_internal.h as suggested by
      Yinghai.

Signed-off-by: Tejun Heo 
Acked-by: Yinghai Lu 
Cc: Ingo Molnar

x86, amd-nb: Complete the rename of AMD NB and related code

2010-11-18T14:53:04+00:00

Not only the naming of the files was confusing, it was even more so for
the function and variable names.

Renamed the K8 NB and NUMA stuff that is also used on other AMD
platforms. This also renames the CONFIG_K8_NUMA option to
CONFIG_AMD_NUMA and the related file k8topology_64.c to
amdtopology_64.c. No functional changes intended.

Signed-off-by: Hans Rosenfeld 
Signed-off-by: Borislav Petkov