A few trivial Makefile cleanups
- dependencipes in head.o was all wrong - deleted
- CMODEL_CFLAG was not used anywhere
- NEW_GCC was then not used outside sparc64/Makefe - do not export it
- FIXME seems not appropriate - all other put oprofile in drivers-y too
- No reason to do -I. (and it still builds)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This also makes us use the MSI queues correctly.

Each MSI queue is serviced by a normal sun4u/sun4v INO interrupt
handler.  This handler runs the MSI queue and dispatches the
virtual interrupts indicated by arriving MSIs in that MSI queue.

All of the common logic is placed in pci_msi.c, with callbacks to
handle the PCI controller specific aspects of the operations.

This common infrastructure will make it much easier to add MSG
support.

Signed-off-by: David S. Miller <davem@davemloft.net>

Fully unify all of the DMA ops so that subordinate bus types to
the DMA operation providers (such as ebus, isa, of_device) can
work transparently.

Basically, we just make sure that for every system device we
create, the dev->archdata 'iommu' and 'stc' fields are filled
in.

Then we have two platform variants of the DMA ops, one for SUN4U which
actually programs the real hardware, and one for SUN4V which makes
hypervisor calls.

This also fixes the crashes in parport_pc on sparc64, reported by
Meelis Roos.

Signed-off-by: David S. Miller <davem@davemloft.net>

Do not select HOTPLUG_CPU from SUN_LDOMS, that causes
HOTPLUG_CPU to be selected even on non-SMP which is
illegal.

Only build hvtramp.o when SMP, just like trampoline.o

Protect dr-cpu code in ds.c with HOTPLUG_CPU.

Likewise move ldom_startcpu_cpuid() to smp.c and protect
it and the call site with SUN_LDOMS && HOTPLUG_CPU.

Signed-off-by: David S. Miller <davem@davemloft.net>

Only adding cpus is supports at the moment, removal
will come next.

When new cpus are configured, the machine description is
updated.  When we get the configure request we pass in a
cpu mask of to-be-added cpus to the mdesc CPU node parser
so it only fetches information for those cpus.  That code
also proceeds to update the SMT/multi-core scheduling bitmaps.

cpu_up() does all the work and we return the status back
over the DS channel.

CPUs via dr-cpu need to be booted straight out of the
hypervisor, and this requires:

1) A new trampoline mechanism.  CPUs are booted straight
   out of the hypervisor with MMU disabled and running in
   physical addresses with no mappings installed in the TLB.

   The new hvtramp.S code sets up the critical cpu state,
   installs the locked TLB mappings for the kernel, and
   turns the MMU on.  It then proceeds to follow the logic
   of the existing trampoline.S SMP cpu bringup code.

2) All calls into OBP have to be disallowed when domaining
   is enabled.  Since cpus boot straight into the kernel from
   the hypervisor, OBP has no state about that cpu and therefore
   cannot handle being invoked on that cpu.

   Luckily it's only a handful of interfaces which can be called
   after the OBP device tree is obtained.  For example, rebooting,
   halting, powering-off, and setting options node variables.

CPU removal support will require some infrastructure changes
here.  Namely we'll have to process the requests via a true
kernel thread instead of in a workqueue.  workqueues run on
a per-cpu thread, but when unconfiguring we might need to
force the thread to execute on another cpu if the current cpu
is the one being removed.  Removal of a cpu also causes the kernel
to destroy that cpu's workqueue running thread.

Another issue on removal is that we may have interrupts still
pointing to the cpu-to-be-removed.  So new code will be needed
to walk the active INO list and retarget those cpus as-needed.

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Virtual devices on Sun Logical Domains are built on top
of a virtual channel framework.  This, with help of hypervisor
interfaces, provides a link layer protocol with basic
handshaking over which virtual device clients and servers
communicate.

Built on top of this is a VIO device protocol which has it's
own handshaking and message types.  At this layer attributes
are exchanged (disk size, network device addresses, etc.)
descriptor rings are registered, and data transfers are
triggers and replied to.

Signed-off-by: David S. Miller <davem@davemloft.net>

Also, use per-cpu data for struct cpu.  Calling kmalloc for
each cpu in topology_init() is just plain clumsy.

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>