The incorrect ordering of operations during cpu dlpar add results in invalid
affinity for the cpu being added. The ibm,associativity property in the
device tree is populated with all zeroes for the added cpu which results in
invalid affinity mappings and all cpus appear to belong to node 0.

This occurs because rtas configure-connector is called prior to making the
rtas set-indicator calls. Phyp does not assign affinity information
for a cpu until the rtas set-indicator calls are made to set the isolation
and allocation state.

Correct the order of operations to make the rtas set-indicator
calls (done in dlpar_acquire_drc) before calling rtas configure-connector.

Fixes: 1a8061c46c46 ("powerpc/pseries: Add kernel based CPU DLPAR handling")

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Load the PowerNV platform pci controller ops into pci controllers
after all the operations are loaded into the platform ops struct, not
before.

Otherwise we aren't actually setting the ops properly which can break
IO for some devices.

Fixes: 65ebf4b63 ("powerpc/powernv: Move controller ops from ppc_md to controller_ops")
Reported-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pull fourth vfs update from Al Viro:
 "d_inode() annotations from David Howells (sat in for-next since before
  the beginning of merge window) + four assorted fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  RCU pathwalk breakage when running into a symlink overmounting something
  fix I_DIO_WAKEUP definition
  direct-io: only inc/dec inode->i_dio_count for file systems
  fs/9p: fix readdir()
  VFS: assorted d_backing_inode() annotations
  VFS: fs/inode.c helpers: d_inode() annotations
  VFS: fs/cachefiles: d_backing_inode() annotations
  VFS: fs library helpers: d_inode() annotations
  VFS: assorted weird filesystems: d_inode() annotations
  VFS: normal filesystems (and lustre): d_inode() annotations
  VFS: security/: d_inode() annotations
  VFS: security/: d_backing_inode() annotations
  VFS: net/: d_inode() annotations
  VFS: net/unix: d_backing_inode() annotations
  VFS: kernel/: d_inode() annotations
  VFS: audit: d_backing_inode() annotations
  VFS: Fix up some ->d_inode accesses in the chelsio driver
  VFS: Cachefiles should perform fs modifications on the top layer only
  VFS: AF_UNIX sockets should call mknod on the top layer only

Pull second batch of KVM changes from Paolo Bonzini:
 "This mostly includes the PPC changes for 4.1, which this time cover
  Book3S HV only (debugging aids, minor performance improvements and
  some cleanups).  But there are also bug fixes and small cleanups for
  ARM, x86 and s390.

  The task_migration_notifier revert and real fix is still pending
  review, but I'll send it as soon as possible after -rc1"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (29 commits)
  KVM: arm/arm64: check IRQ number on userland injection
  KVM: arm: irqfd: fix value returned by kvm_irq_map_gsi
  KVM: VMX: Preserve host CR4.MCE value while in guest mode.
  KVM: PPC: Book3S HV: Use msgsnd for signalling threads on POWER8
  KVM: PPC: Book3S HV: Translate kvmhv_commence_exit to C
  KVM: PPC: Book3S HV: Streamline guest entry and exit
  KVM: PPC: Book3S HV: Use bitmap of active threads rather than count
  KVM: PPC: Book3S HV: Use decrementer to wake napping threads
  KVM: PPC: Book3S HV: Don't wake thread with no vcpu on guest IPI
  KVM: PPC: Book3S HV: Get rid of vcore nap_count and n_woken
  KVM: PPC: Book3S HV: Move vcore preemption point up into kvmppc_run_vcpu
  KVM: PPC: Book3S HV: Minor cleanups
  KVM: PPC: Book3S HV: Simplify handling of VCPUs that need a VPA update
  KVM: PPC: Book3S HV: Accumulate timing information for real-mode code
  KVM: PPC: Book3S HV: Create debugfs file for each guest's HPT
  KVM: PPC: Book3S HV: Add ICP real mode counters
  KVM: PPC: Book3S HV: Move virtual mode ICP functions to real-mode
  KVM: PPC: Book3S HV: Convert ICS mutex lock to spin lock
  KVM: PPC: Book3S HV: Add guest->host real mode completion counters
  KVM: PPC: Book3S HV: Add helpers for lock/unlock hpte
  ...

Some PowerNV systems include a hardware random-number generator.
This HWRNG is present on POWER7+ and POWER8 chips and is capable of
generating one 64-bit random number every microsecond.  The random
numbers are produced by sampling a set of 64 unstable high-frequency
oscillators and are almost completely entropic.

PAPR defines an H_RANDOM hypercall which guests can use to obtain one
64-bit random sample from the HWRNG.  This adds a real-mode
implementation of the H_RANDOM hypercall.  This hypercall was
implemented in real mode because the latency of reading the HWRNG is
generally small compared to the latency of a guest exit and entry for
all the threads in the same virtual core.

Userspace can detect the presence of the HWRNG and the H_RANDOM
implementation by querying the KVM_CAP_PPC_HWRNG capability.  The
H_RANDOM hypercall implementation will only be invoked when the guest
does an H_RANDOM hypercall if userspace first enables the in-kernel
H_RANDOM implementation using the KVM_CAP_PPC_ENABLE_HCALL capability.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>

Pull powerpc updates from Michael Ellerman:

 - Numerous minor fixes, cleanups etc.

 - More EEH work from Gavin to remove its dependency on device_nodes.

 - Memory hotplug implemented entirely in the kernel from Nathan
   Fontenot.

 - Removal of redundant CONFIG_PPC_OF by Kevin Hao.

 - Rewrite of VPHN parsing logic & tests from Greg Kurz.

 - A fix from Nish Aravamudan to reduce memory usage by clamping
   nodes_possible_map.

 - Support for pstore on powernv from Hari Bathini.

 - Removal of old powerpc specific byte swap routines by David Gibson.

 - Fix from Vasant Hegde to prevent the flash driver telling you it was
   flashing your firmware when it wasn't.

 - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver.

 - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan
   Stancek.

 - Some fixes for migration from Tyrel Datwyler.

 - A new syscall to switch the cpu endian by Michael Ellerman.

 - Large series from Wei Yang to implement SRIOV, reviewed and acked by
   Bjorn.

 - A fix for the OPAL sensor driver from Cédric Le Goater.

 - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman.

 - Large series from Daniel Axtens to make our PCI hooks per PHB rather
   than per machine.

 - Small patch from Sam Bobroff to explicitly abort non-suspended
   transactions on syscalls, plus a test to exercise it.

 - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu.

 - Small patch to enable the hard lockup detector from Anton Blanchard.

 - Fix from Dave Olson for missing L2 cache information on some CPUs.

 - Some fixes from Michael Ellerman to get Cell machines booting again.

 - Freescale updates from Scott: Highlights include BMan device tree
   nodes, an MSI erratum workaround, a couple minor performance
   improvements, config updates, and misc fixes/cleanup.

* tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits)
  powerpc/powermac: Fix build error seen with powermac smp builds
  powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE
  powerpc: Remove PPC32 code from pseries specific find_and_init_phbs()
  powerpc/cell: Fix iommu breakage caused by controller_ops change
  powerpc/eeh: Fix crash in eeh_add_device_early() on Cell
  powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH
  powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails
  powerpc/pseries: Correct memory hotplug locking
  powerpc: Fix missing L2 cache size in /sys/devices/system/cpu
  powerpc: Add ppc64 hard lockup detector support
  oprofile: Disable oprofile NMI timer on ppc64
  powerpc/perf/hv-24x7: Add missing put_cpu_var()
  powerpc/perf/hv-24x7: Break up single_24x7_request
  powerpc/perf/hv-24x7: Define update_event_count()
  powerpc/perf/hv-24x7: Whitespace cleanup
  powerpc/perf/hv-24x7: Define add_event_to_24x7_request()
  powerpc/perf/hv-24x7: Rename hv_24x7_event_update
  powerpc/perf/hv-24x7: Move debug prints to separate function
  powerpc/perf/hv-24x7: Drop event_24x7_request()
  powerpc/perf/hv-24x7: Use pr_devel() to log message
  ...

Conflicts:
	tools/testing/selftests/powerpc/Makefile
	tools/testing/selftests/powerpc/tm/Makefile

Use orderly_reboot so userspace will to shut itself down via the reboot
path.  This is required for graceful reboot initiated by the BMC, such as
when a user uses ipmitool to issue a 'chassis power cycle' command.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Fabian Frederick <fabf@skynet.be>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

powermac smp builds fail with

arch/powerpc/platforms/powermac/smp.c: In function 'smp_psurge_probe':
arch/powerpc/platforms/powermac/smp.c:278:3: error:
		'return' with a value, in function returning void

There are several instances of this error.

Fixes: a7f4ee1fe93a ("powerpc: Drop return value of smp_ops->probe()")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

51925fb3c5 "powerpc/pseries: Implement memory hotplug remove in the kernel"
broke compile when CONFIG_MEMORY_HOTREMOVE is not defined due to missing
symbols. This fixes the issue by adding the missing symbols.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>