litmus-rt.git/arch/powerpc/boot/wrapper, branch master

powerpc/boot/wrapper: use the pseries wrapper for zImage.epapr

2015-03-16T07:58:32+00:00

We'll likely be entering the zImage.epapr as BE, so include the pseries
implementation of _zimage_start, which adds the endian fixup magic.

Although the endian fixup won't work on Book III-E machines starting LE,
the current entry point doesn't support LE anyway, so we shouldn't be
breaking anything.

Signed-off-by: Jeremy Kerr 
Signed-off-by: Michael Ellerman

IBM Akebono: Add the Akebono platform

2014-04-30T22:26:26+00:00

This patch adds support for the IBM Akebono board.

Signed-off-by: Alistair Popple 
Signed-off-by: Benjamin Herrenschmidt

powerpc/boot: Add support for 64bit little endian wrapper

2014-04-28T07:36:21+00:00

The code is only slightly modified : entry points now use the
FIXUP_ENDIAN trampoline to switch endian order. The 32bit wrapper
is kept for big endian kernels and 64bit is enforced for little
endian kernels with a PPC64_BOOT_WRAPPER config option.

The linker script is generated using the kernel preprocessor flags
to make use of the CONFIG_* definitions and the wrapper script is
modified to take into account the new elf64ppc format.

Finally, the zImage file is compiled as a position independent
executable (-pie) which makes it loadable at any address by the
firmware.

Signed-off-by: Cédric Le Goater 
Signed-off-by: Benjamin Herrenschmidt

powerpc/boot: Add a global entry point for pseries

2014-04-28T07:36:17+00:00

When entering the boot wrapper in little endian, we will need to fix
the endian order using a fixup trampoline like in the kernel. This
patch overrides the _zimage_start entry point for this purpose.

Signed-off-by: Cédric Le Goater 
Signed-off-by: Benjamin Herrenschmidt

powerpc/embedded6xx: Add support for Motorola/Emerson MVME5100

2014-01-09T23:52:20+00:00

Add support for the Motorola/Emerson MVME5100 Single Board Computer.

The MVME5100 is a 6U form factor VME64 computer with:

	- A single MPC7410 or MPC750 CPU
	- A HAWK Processor Host Bridge (CPU to PCI) and
	  MultiProcessor Interrupt Controller (MPIC)
	- Up to 500Mb of onboard memory
	- A M48T37 Real Time Clock (RTC) and Non-Volatile Memory chip
	- Two 16550 compatible UARTS
	- Two Intel E100 Fast Ethernets
	- Two PCI Mezzanine Card (PMC) Slots
	- PPCBug Firmware

The HAWK PHB/MPIC is compatible with the MPC10x devices.

There is no onboard disk support. This is usually provided by installing a PMC
in first PMC slot.

This patch revives the board support, it was present in early 2.6
series kernels. The board support in those days was by Matt Porter of
MontaVista Software.

CSC Australia has around 31 of these boards in service. The kernel in use
for the boards is based on 2.6.31. The boards are operated without disks
from a file server.

This patch is based on linux-3.13-rc2 and has been boot tested.

Only boards with 512 Mb of memory are known to work.

Signed-off-by: Stephen Chivers 
Tested-by: Alessio Igor Bogani 
Signed-off-by: Scott Wood

powerpc/boot: Properly handle the base "of" boot wrapper

2013-11-04T23:09:11+00:00

The wrapper script needs an explicit rule for the "of" boot
wrapper (generic wrapper, similar to pseries). Before
0c9fa29149d3726e14262aeb0c8461a948cc9d56 it was hanlded
implicitly by the statement:

platformo=$object/"$platform".o

But now that epapr.o needs to be added, that doesn't work
and an explicit rule must be added.

Signed-off-by: Benjamin Herrenschmidt

powerpc/boot: Don't change link address for OF-based platforms

2013-10-30T05:00:17+00:00

Commit c55aef0e5bc6 ("powerpc/boot: Change the load address for the
wrapper to fit the kernel") adjusts the wrapper address unnecessarily
for platforms that use arch/powerpc/boot/of.c, since the code there
allocates space for the kernel wherever it can find it and doesn't
necessarily load the kernel at address 0.  Changing the link address
is actually harmful since it can cause the zImage to overlap with
Open Firmware and thus fail to boot.

To fix this, we set make_space to n for all of the platforms that
use of.o.

Signed-off-by: Paul Mackerras 
Signed-off-by: Benjamin Herrenschmidt

powerpc/zImage: make the "OF" wrapper support ePAPR boot

2013-09-25T04:18:44+00:00

This makes the "OF" zImage wrapper (zImage.pseries, zImage.pmac,
zImage.maple) work if booted via a flat device-tree (ePAPR boot
mode), and thus potentially usable with kexec.

Signed-off-by: Benjamin Herrenschmidt

powerpc/ps3: Do not adjust the wrapper load address

2012-03-21T00:16:13+00:00

Commit c55aef0e5bc6 "powerpc/boot: Change the load address for the wrapper
to fit the kernel" adjusted the laod address if the uncompressed kernel
was too large.  Ps3 does not compress the kernel and uses a different
linker script, so do not adjust the load address in that case.

fixes this build error:

powerpc64-linux-ld: section .text loaded at [0000000000e00000,0000000000e0721b] overlaps section .kernel:dtb loaded at [0000000000e00000,0000000000e0066f]

Signed-off-by: Stephen Rothwell 
Signed-off-by: Benjamin Herrenschmidt

powerpc/boot: Change the WARN to INFO for boot wrapper overlap message

2011-12-21T20:09:25+00:00

commit c55aef0e5bc6 ("powerpc/boot: Change the load address
for the wrapper to fit the kernel") introduced a WARNING to
inform the user that the uncompressed kernel would overlap
the boot uncompressing wrapper code. Change it to an INFO.

I initially thought, this would be a 'WARNING' for the those
boards, where the link_address should be fixed, so that the
user can take actions accordingly.

Changing the same to INFO.

Signed-off-by: Suzuki K. Poulose 
Signed-off-by: Josh Boyer