litmus-rt.git/arch/powerpc/boot/Makefile, branch linux-tip

powerpc/boot: Remove addRamdisk.c since it is now unused

2010-06-15T05:02:32+00:00

It was used in the dim distant past for adding initrds to images
for legacy iSeries, but it's not even used for that now that we
have initramfs.  So remove it.

Signed-off-by: Paul Mackerras 
Signed-off-by: Benjamin Herrenschmidt

powerpc/4xx: Simple platform for the ISS 4xx simulator

2010-05-05T15:11:56+00:00

This is a trivial 4xx plaform that uses the new simple bsp from
Josh and is handy to use in simulators such as ISS or even Mambo
who don't properly implement most of the actual devices in the
SoC but really only the core.

Signed-off-by: Torez Smith  
Signed-off-by: Dave Kleikamp 
Signed-off-by: Josh Boyer

powerpc: Add a new zImage for maple using a different link address

2010-04-07T04:12:36+00:00

The maple platform failed to load because it's firmware could not take a
link address of 0x4000000.  A new platform type with a link address of
0x400000 had to be created for the maple.

Signed-off-by: Corey Minyard 
Signed-off-by: Benjamin Herrenschmidt

zlib: Fix build of powerpc boot wrapper

2010-01-14T00:13:39+00:00

Commit ac4c2a3bbe5db5fc570b1d0ee1e474db7cb22585 broke the build
of all powerpc boot wrappers.

It attempts to add an include of autoconf.h but used the wrong
path for it. It also adds -D__KERNEL__ to our boot wrapper, both
things that we pretty much didn't do on purpose so far.

We want our boot wrapper to remain independent enough of the kernel
for various reasons, one of them being that you can "wrap" an existing
kernel at distro install time which allows to ship one kernel image
and a set of boot wrappers for different platforms, the wrappers
don't have to be built out of the same kernel build tree.

It's also incorrect to do what the patch does in our boot environment
since we may not have a proper alignment exception handler which means
we may not be able to fixup the few cases where an unaligned access will
need SW emulation (depends on the core variant, could be when crossing
page or segment boundaries for example).

This patch fixes it by putting the old code back in and using the
new "fancy" variant only when CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
is set, which happens not to be set on powerpc since we don't include
autoconf.h. It also reverts the changes to our boot wrapper Makefile.

This means that x86 should, afaik, keep the optimisations since its
boot wrapper does include autoconf.h and define __KERNEL__ (though I
doubt they make that much different outside of slow embedded processors).

Signed-off-by: Benjamin Herrenschmidt 
Signed-off-by: Linus Torvalds

zlib: optimize inffast when copying direct from output

2010-01-11T17:34:04+00:00

JFFS2 uses lesser compression ratio and inflate always ends up in "copy
direct from output" case.

This patch tries to optimize the direct copy procedure.  Uses
get_unaligned() but only in one place.

The copy loop just above this one can also use this optimization, but I
havn't done so as I have not tested if it is a win there too.

On my MPC8321 this is about 17% faster on my JFFS2 root FS than the
original.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Joakim Tjernlund 
Cc: Roel Kluin 
Cc: Richard Purdie 
Cc: David Woodhouse 
Signed-off-by: Andrew Morton 
Signed-off-by: Linus Torvalds

powerpc: wii: bootwrapper bits

2009-12-13T05:24:29+00:00

Add support for the Nintendo Wii video game console to the powerpc
bootwrapper.

dtbImage.wii is a wrapped image that contains a flat device tree,
an entry point compatible with the Homebrew Channel and BootMii,
and an optional initrd.

Signed-off-by: Albert Herranz 
Acked-by: Segher Boessenkool 
Acked-by: Benjamin Herrenschmidt 
Signed-off-by: Grant Likely

powerpc: gamecube: bootwrapper bits

2009-12-13T05:24:26+00:00

Add support for the Nintendo GameCube video game console to the powerpc
bootwrapper.

dtbImage.gamecube is a wrapped image that contains a flat device tree,
an entry point compatible with SDload, and an optional initrd.

Signed-off-by: Albert Herranz 
Acked-by: Segher Boessenkool 
Signed-off-by: Grant Likely

powerpc: gamecube/wii: usbgecko bootwrapper console support

2009-12-13T05:24:26+00:00

Add support for using the USB Gecko adapter as a bootwrapper console on
the Nintendo GameCube and Wii video game consoles.
The USB Gecko is a 3rd party memory card interface adapter that provides
a EXI (External Interface) to USB serial converter.

Signed-off-by: Albert Herranz 
Acked-by: Segher Boessenkool 
Signed-off-by: Grant Likely

powerpc/405ex: support cuImage via included dtb

2009-08-31T13:23:22+00:00

To support cuImage, we need to initialize the required sections and
ensure that it is built.

Signed-off-by: Tiejun Chen 
Signed-off-by: Josh Boyer

powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC

2009-08-31T13:15:51+00:00

This patch adds support for the ESTeem 195E Hotfoot SBC.

There are several variants of the SBC deployed, single/dual
ethernet+serial, and also 4MB/8MB flash variations.  In the interest of
having a single kernel image boot on all boards, the cuboot shim detects
the differences and mangles the DTS tree appropriately.

With the exception of the CF interface that was never populated on
production boards, this code/DTS supports all boardpop options.

Signed-off-by: Solomon Peachy 
Signed-off-by: Josh Boyer