litmus-rt.git/arch/arm/mach-rockchip, branch master

Revert "ARM: rockchip: fix undefined instruction of reset_ctrl_regs"

2015-05-13T13:47:03+00:00

This reverts commit b403125d3bbf8046c1186e1a49cb17bb5551db14.

As reported by Chris, both commits
        b403125 "ARM: rockchip: fix undefined instruction of reset_ctrl_regs"
        0ea001d "ARM: rockchip: disable dapswjdp during suspend"
actually fix the same issue and b403125 is the older one, which got
superseded by 0ea001d. Therefore revert the obsolete one again.

Reported-by: Chris Zhong 
Signed-off-by: Heiko Stuebner

rockchip: make sure timer7 is enabled on rk3288 platforms

2015-04-16T19:22:17+00:00

timer7 supplies the architected timer and thus as has to run when
the system clocksource and clockevents drivers are registered.

While it should be the responsibility of the bootloader to do this,
and there exists a fix in a community u-boot, all u-boot based systems
that actually shipped have the mentioned issue.

Therefore to not require every developer to update their u-boot, add a
snippet for this, enabling the timer early in the kernel.

Signed-off-by: Heiko Stuebner

ARM: rockchip: fix undefined instruction of reset_ctrl_regs

2015-04-16T19:17:26+00:00

Sometimes the debug module may not work well after resume, since it has
not been correctly reset when wakeup from suspend. That cause system
crash during reusme, and a 'undefined instruction' is displayed on the
console. Set the GRF_FORCE_JTAG bit of RK3288_GRF_SOC_CON0 can ensure
that debug modul is reset. And we can change the value of
RK3288_GRF_SOC_CON0 back when system resume.

Signed-off-by: Chris Zhong 
Tested-by: Caesar Wang 
Reviewed-by: Douglas Anderson 

According to discussions, there does not seem a better solution available.
Please also see the potential security implication described in the
comment inline in the code.

Signed-off-by: Heiko Stuebner

ARM: rockchip: disable dapswjdp during suspend

2015-04-16T19:15:47+00:00

Reset dapswjdp is controlled by JTAG_TRSTN, if the iomux of this pin is
not "jtag_trstn". the AP would think this pin is always high, so it can
not reset before resume. When system resume, but the dapswjdp is not in
a default state, it may Access some illegal address, it cause system
crash during resume.
Let's disable this jtag function by clear the dapdeviceen bit, it
prohibit the dapswjdp to access memory and registers. This bit would
be enable in MASKROM, so we need clear it in suspend everytime.

Signed-off-by: Chris Zhong 
Reviewed-by: Doug Anderson 
Signed-off-by: Heiko Stuebner

ARM: rockchip: disable watchdog during suspend

2015-03-11T21:41:02+00:00

The watchdog clock should be disable in dw_wdt_suspend, but we set a
dummy clock to watchdog for rk3288. So the watchdog will continue to
work during suspend. And we switch the system clock to 32khz from 24Mhz,
during suspend, so the watchdog timer over count will increase to
755 times, about 12.5 hours, the original value is 60 seconds. So
watchdog will reset the system over a night,  but voltage are all
incorrect, then it hang on reset.

Signed-off-by: Chris Zhong 
Signed-off-by: Daniel Kurtz 
Reviewed-by: Doug Anderson 
Tested-by: Doug Anderson 
Signed-off-by: Heiko Stuebner

ARM: rockchip: decrease the wait time for resume

2015-03-11T21:40:59+00:00

The register-default delay time for wait the 24MHz OSC stabilization as well
as PMU stabilization is 750ms, let's decrease them to a still safe 30ms.

Signed-off-by: Chris Zhong 
Reviewed-by: Doug Anderson 
Tested-by: Doug Anderson 
Signed-off-by: Heiko Stuebner

ARM: rockchip: Constify struct regmap_config and staticize local function

2015-03-11T21:40:56+00:00

The regmap_config struct may be const because it is not modified by the
driver and regmap_init() accepts pointer to const.

Make function rockchip_get_core_reset() static because it is not used
outside of the platsmp.c file.

Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Heiko Stuebner

ARM: rockchip: force built-in regulator support for PM

2015-02-18T11:20:30+00:00

The rockchips suspend/resume code requires regulators to work,
and gives a compile-time error if they are not available:

arch/arm/mach-rockchip/built-in.o: In function `rk3288_suspend_finish':
:(.text+0x146): undefined reference to `regulator_suspend_finish'
arch/arm/mach-rockchip/built-in.o: In function `rk3288_suspend_prepare':
:(.text+0x18e): undefined reference to `regulator_suspend_prepare'

To solve this, we now enable regulators whenever they are needed,
which is what we do on a lot of other platforms as well.

Signed-off-by: Arnd Bergmann

ARM: rockchip: make rockchip_suspend_init conditional

2015-02-18T11:20:28+00:00

If CONFIG_PM_SLEEP is disabled, we get a build error for rockchips:

arch/arm/mach-rockchip/built-in.o: In function `rockchip_dt_init':
:(.init.text+0x1c): undefined reference to `rockchip_suspend_init'

This adds an inline alternative for that case.

Signed-off-by: Arnd Bergmann 
Reviewed-by: Heiko Stuebner 
Cc: linux-rockchip@lists.infradead.org

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2015-02-17T17:27:54+00:00

Pull ARM SoC platform changes from Olof Johansson:
 "New and updated SoC support.  Also included are some cleanups where
  the platform maintainers hadn't separated cleanups from new developent
  in separate branches.

  Some of the larger things worth pointing out:

   - A large set of changes from Alexandre Belloni and Nicolas Ferre
     preparing at91 platforms for multiplatform and cleaning up quite a
     bit in the process.

   - Removal of CSR's "Marco" SoC platform that never made it out to the
     market.  We love seeing these since it means the vendor published
     support before product was out, which is exactly what we want!

  New platforms this release are:

   - Conexant Digicolor (CX92755 SoC)
   - Hisilicon HiP01 SoC
   - CSR/sirf Atlas7 SoC
   - ST STiH418 SoC
   - Common code changes for Nvidia Tegra132 (64-bit SoC)

  We're seeing more and more platforms having a harder time labelling
  changes as cleanups vs new development -- which is a good sign that
  we've come quite far on the cleanup effort.  So over time we might
  start combining the cleanup and new-development branches more"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (124 commits)
  ARM: at91/trivial: unify functions and machine names
  ARM: at91: remove at91_dt_initialize and machine init_early()
  ARM: at91: change board files into SoC files
  ARM: at91: remove at91_boot_soc
  ARM: at91: move alternative initial mapping to board-dt-sama5.c
  ARM: at91: merge all SOC_AT91SAM9xxx
  ARM: at91: at91rm9200: set idle and restart from rm9200_dt_device_init()
  ARM: digicolor: select syscon and timer
  ARM: zynq: Simplify SLCR initialization
  ARM: zynq: PM: Fixed simple typo.
  ARM: zynq: Setup default gpio number for Xilinx Zynq
  ARM: digicolor: add low level debug support
  ARM: initial support for Conexant Digicolor CX92755 SoC
  ARM: OMAP2+: Add dm816x hwmod support
  ARM: OMAP2+: Add clock domain support for dm816x
  ARM: OMAP2+: Add board-generic.c entry for ti81xx
  ARM: at91: pm: remove warning to remove SOC_AT91SAM9263 usage
  ARM: at91: remove unused mach/system_rev.h
  ARM: at91: stop using HAVE_AT91_DBGUx
  ARM: at91: fix ordering of SRAM and PM initialization
  ...